How to Sign in to Recovery Mode on Xiaomi Redmi 9A: All the working ways

Recovery Mode on Xiaomi Redmi 9A is a utility tool that allows you to perform critical operations: factory reset, firmware installation or cache cleaning. Without access, you can not solve many software problems, from system freezes to the consequences of a failed update. However, entering Recovery on Xiaomi budget models has its own nuances, especially if we are talking about a drain Recovery with limited functionality.

In this article, we will discuss all the current ways to enter the recovery mode on Redmi. 9A (including Redmi modifications 9AT redmi 9A Sport, considering the specifics MIUI You'll learn how to get around common bugs, why the phone might not respond to button combinations, and what to do if Fastboot loads instead of Recovery. ADB ornamental.

Why do you need to recover your mode on Redmi 9A?

Recovery mode is not just a tool for resetting settings. On Redmi 9A, it performs several key functions:

• 🔄 Hard Reset is the only way to bring your phone back to life if it’s locked with a pattern lock or password and your Mi Account is missing.
• 📦 Installation of official firmware through Apply update from ADB or Apply update from SD card (if the loader is unlocked).
• 🧹 Cache Clearance (Wipe Cache Partition) – helps with system brakes, application errors or after a failed update.
• 🔧 Diagnostics of hardware problems: in Recovery you can check the operation of the display, buttons and vibrations without downloading MIUI.

It’s important to understand that Redmi 9A comes with Xiaomi’s stock Recovery, which has limited functionality, such as not installing custom firmware without first unlocking the bootloader. If you need more features (like installing TWRP), you’ll need a separate procedure that’s beyond the scope of this article.

⚠️ Warning: Recovery removes all data from internal memory, including photos, contacts and apps. If the phone is still on, back up first through Settings. → The phone. → Backup.

Method 1: Enter Recovery via hardware buttons (for all versions)

This is the most versatile method that works even if the phone isn't turning on or locked.On the Redmi 9A, the button combination is standard on most Xiaomi devices, but there are nuances with timing.

Step-by-step:

1. Turn off your phone. If it freezes, hold the power button for 10 to 15 seconds until the screen goes out.
2. Press the Power button and Volume Up button at the same time.
3. Hold both buttons for 8-12 seconds until the Mi logo appears on the screen (don’t let go immediately after the vibration!).
4. As soon as the Recovery menu (black screen with blue text in English) appears, release the buttons.

If instead of Recovery you were in Fastboot Mode (white screen with a rabbit and the inscription FASTBOOT), then:

• 🕒 You hold your buttons for too long (more than 15 seconds).
• 🔄 You released the buttons too early (before the Mi logo appeared).
• 🔋 Battery discharged below 5% (Recovery will not start).

Is the phone completely off (not in sleep mode)?

Are both buttons (Food + Volume Up) clamped at the same time?

Do you hold the buttons for at least 8 seconds after the Mi logo appears?

Is the battery more than 20% charged?

-->

On Redmi 9A with MIUI 12 and later, stock Recovery can ask for a password from your Mi Account even if you're resetting. This is anti-theft protection. If you don't remember the password, you'll have to use alternative methods.

Method 2: Login via ADB (if the phone is switched on)

If the phone is working, but you need to get into Recovery to clear the cache or install an update, you can use ADB (Android Debug Bridge), which requires USB debugging enabled, but does not require unlocking the bootloader.

What you need:

• 🖥️ Computer with Windows/Linux/macOS.
• 🔌 USB-cable (preferably original).
• 📥 Installed Xiaomi drivers and Google’s Platform Tools package.

Instructions:

1. Turn on Settings → About Phone → MIUI version (click 7 times to activate developer mode).
2. Return to Settings → Additional → For developers and enable USB debugging.
3. Connect the phone to the computer and confirm the debugging permission on the smartphone screen.
4. Open the command line (Windows) or terminal (Linux/macOS) in the folder with the platform-tools.
5. Enter the command: adb devices Make sure the device is identified (serial number should appear).
6. Run the command to reboot in Recovery: adb reboot recovery

If after the command the phone is rebooted to normal mode, it means:

• ❌ Debugging by USB Not on or confirmed on the phone.
• ❌ Drivers are installed incorrectly (try reinstalling via Mi). PC Suite).
• ❌ Lockdown OEM Unlocking in Settings → For developers (you need to enable Unlocking) OEM).

Hardware buttons |ADB|Mi Flash Tool|Another way-->

Method 3: Sign in via Mi Flash Tool (for "bricks")

If the Redmi 9A does not respond to buttons and does not turn on (called a "brick"), you can try downloading it to Recovery via the Mi Flash Tool.This method requires an unlocked bootloader, but is suitable for cases where the phone is completely inoperable.

Step-by-step:

1. Download and install the Mi Flash Tool (the official utility from Xiaomi).
2. Download the firmware for Redmi 9A (select the Fastboot version, not Recovery).
3. Unpack the archive with firmware in a folder without Cyrillic (for example, C:\redmi9a_fastboot).
4. Launch the Mi Flash Tool, press Select and specify the path to the firmware folder.
5. Turn off the phone. Press the volume down. + Power and plug in. USB-The phone has to be determined how to get the cable to the computer. COM-port.
6. In the Mi Flash Tool, press Refresh – the serial number of the device should appear.
7. At the bottom, select Clean all (this will reset all data!) and click Flash.
8. After the firmware is completed (5-10 minutes), the phone will automatically reboot to Recovery.

⚠️ Warning: This method completely erases data from your phone, including internal memory. Use it only if other methods don't work. Also make sure you download the firmware specifically for Redmi. 9A (dandelion codename, not for another model.

What to do if Recovery asks for a password from a Mi Account

Redmi 9A with stock Recovery can request a password from your Mi Account after resetting, even if you haven’t tied the device to it. This is Factory Reset Protection (FRP) protection, which activates automatically when you first sign in to your Xiaomi account.

Options for a solution:

• 🔑 Enter the password if you remember it. Once reset, the phone unlocks.
• 📧 Restore your password via account.xiaomi.com (requires access to the email or phone number associated with your account).
• 🛠️ Bypass FRP (Power users only: requires custom Recovery installation (TWRP) and manually delete files /data/system/frp. On the Redmi. 9A This is only possible with an unlocked boot loader.

If you bought the phone with your hands and the previous owner did not untidy the account, contact him to untying through the web version of Mi Account. Xiaomi does not provide official ways to bypass FRP on user requests.

💡

Before selling or transferring your phone, be sure to untie your Mi Account: Settings → Xiaomi Account → Sign out and reset your settings. This will save the new owner from FRP problems.

Difference Between Stock Recovery and TWRP on Redmi 9A

Xiaomi’s stock Recovery on Redmi 9A has a minimal feature set and only works with official firmware. TWRP (Team Win Recovery Project) is a custom Recovery with advanced features, but its installation requires unlocking the bootloader.

Installation TWRP on the Redmi 9A This is possible only after unlocking the bootloader through the official Xiaomi tool.The procedure takes up to 72 hours (waiting). SMS-permissions) and resets all data. Detailed installation instructions TWRP This article is beyond the scope of this article, but you can find it in the topic on XDA-Developers.

Typical errors and their solutions

Even when following instructions, users often encounter problems logging into Recovery, and here are the most common errors and ways to fix them:

• 🔋 Phone does not respond to buttons: - Check battery power (minimum 20%). - Try another charger (sometimes the problem is the connector). USB-C). — If the phone falls, the power button may be damaged (repair required).
• 📱 Fastboot appears instead of Recovery: You've held the buttons too long. Try again, releasing them immediately after the Mi logo appears. ADB.
• 🔒 Recovery asks for a password, but you don’t remember it: – Try to restore a password via account.xiaomi.com. – If the phone isn’t yours, contact the previous owner to unbundle your account.
• 🔄 After reset, the phone is stuck on the Mi logo: - This means damage to the firmware. Try to reflash the phone through the Mi Flash Tool (Clean all method). - If it does not help, perhaps damaged boot section - you will need to flash it in the service center.

💡

If the phone doesn't respond to any of the methods of logging into Recovery, it's likely a hardware problem: the power button is faulty, the motherboard is damaged, or the battery is completely drained.

FAQ: Frequent questions about Recovery on Redmi 9A