How to Restore Google Account Access on Xiaomi After Resetting

Resetting on Xiaomi smartphones is a standard procedure for solving system problems or before selling a device. However, after a hard reset, many users face an unpleasant surprise: the phone requires you to enter the data of a Google account that was tied before the reset, but the password is forgotten or lost. This lock is called FRP (Factory Reset Protection) - protection against unauthorized use after a reset.

In this article, we will discuss all the current ways to bypass FRP and restore access to a Google account on Xiaomi in 2026, including official methods through backup codes, synchronization with Mi Account, as well as alternative solutions for devices on MIUI 12/13/14 and HyperOS.

Why Xiaomi Requires an Old Google Account After a Reset

FRP was introduced by Google in Android 5.1 Lollipop as a security measure against device theft. Once the settings are reset, the system checks whether the phone was previously linked to a Google account. If so, it requires you to confirm ownership by entering the username and password of the same account that was used before the reset.

On Xiaomi, this protection works in tandem with Mi Account (manufacturer’s account). Depending on the model and firmware version (MIUI or HyperOS), the verification algorithm may differ:

• 📱 Snapdragon smartphones: Most often only require a Google account, but newer firmware versions may also require Mi Account.
• 🔧 Mediatek devices: Usually more strictly refer to FRP, especially on budget models (Redmi 9A/10A).
• 🔄 After upgrading to HyperOS: Some users have noted that protection has become tougher — now you may need confirmation via SMS or backup email.

Important: If you bought a phone with your hands and the previous owner did not untie your account, it is legally impossible to circumvent FRP – this violates Google’s policy.

⚠️ Warning: Using informal FRP bypass methods (e.g. via ADB or Fastboot) may result in IMEI blocking on some Xiaomi models.

Official ways to restore access to Google account

If you have forgotten your password from your linked account but remember your login, use Google’s official recovery tools, which work on all Xiaomi devices, regardless of the model and firmware version.

1. Recovery via backup email or phone

The easiest way is to use the data specified during the registration of the account:

1. On the FRP lock screen, click Forgot Password? (or Forgot Password?).
2. Enter the email account that was linked to the phone.
3. Select the recovery method: 📧 Backup email: Google will send a password reset link. 📞 Phone number: will come SMS with the confirmation code.

Create a new password and log in to your phone account.

If the backup email or phone is not tied, proceed to the following method.

2. Recovery via Google Smart Lock (for devices with MIUI 12+)

Smart Lock allows you to unlock your account using a trusted device (for example, another smartphone or tablet where you are already logged in to the same Google account).

1. On the blocked Xiaomi, select the option of Another Login Way (or Try Another Way).
2. Click Use Smart Lock.
3. Scan the QR- code from the phone screen on a trusted device via a browser (click on the accounts.google.com/smartlock link).
4. Confirm the entrance on a trusted device.

⚠️ Warning: Smart Lock only works if the feature was enabled in advance in your Google account settings on that device. If you've never set it up, the method won't work.

3.Use of Google backup codes

When setting up two-factor authentication (2FA), Google gives 8 backup codes to restore access, and if you have saved them (for example, in notes or on paper), use them like this:

1. On the account login screen, select Another Way → Enter a backup code.
2. Enter one of the 8-digit codes.
3. Create a new password for your account.

If the codes are lost but you have access to another device with that account, you can generate new ones:

1. Open the Google security settings.
2. Find the Backup Codes section and generate a new set.

Check emails for backup codes from Google

Make sure you have access to a backup email or phone

Try to log in to your account from another device (PC, tablet)

Download Google Authenticator if you’ve used 2FA

-->

Bypassing FRP on Xiaomi via Mi Account (if Google is not suitable)

If you can’t restore through Google, try using a Xiaomi account (Mi Account). On some models (especially with HyperOS), the system allows you to unlock your device through your tied Mi Account, even if your Google account is forgotten.

Step 1: Checking the Mi Account

On the FRP lock screen:

1. Click Use another account (or Sign in with another account).
2. Choose Mi Account (if there is no such option, the method is not suitable).
3. Enter your email and password from your Mi Account.

If you do not remember your Mi Account, restore it:

1. Go to account.xiaomi.com.
2. Click Forgot Password? and follow the instructions (requires access to an email or phone linked to your account).

Step 2: Sync with Mi Cloud (for MIUI 13/14)

On some firmware (MIUI 13/14), after you log in to Mi Account, the system will prompt you to sync your data to Mi Cloud.This can automatically unlock FRP if:

• 🔄 The phone was synced to the Mi Cloud before reset.
• 📱 The device was previously included in the same Mi Account.
• 🔒 There were no active restrictions on the account (e.g., blocking for suspicious activity).

⚠️ Warning: If you log in to Mi Account, you get an error saying, "This device is not linked to your account," then the previous owner didn't untie it, and you can't legally get around the lock, so please contact the seller.

💡

If you don’t have access to either Google or Mi Account, but the phone was officially purchased, contact Xiaomi Support with a check for your purchase. They can help unlock the device remotely (paid service, ~1500–3000₽).

Alternative methods of bypassing FRP (for advanced users)

If the official methods don't work, you can try technical methods of bypassing, which require skills in working with ADB, Fastboot or special utilities, these methods do not guarantee 100% results and can lead to data loss or locking the device.

Method 1: Bypass ADB (for Android 8–11)

On some versions of MIUI (especially Android 8-11), you can remove FRP via ADB (Android Debug Bridge).

• 🖥️ A computer with installed Xiaomi drivers and ADB Tools.
• 🔌 USB-cable (preferably original).
• ⚙️ Included debugging according to USB (unless it was turned off before resetting).

Instructions:

1. Connect the phone to the PC.


2. Open the command line in the folder with ADB.




3. Enter the commands in turn:




adb shell




content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1




exit




4.Reboot phone: adb reboot




5. After the reboot, try to reset the configuration – FRP may disappear.

If USB debugging is disabled, this method won't work, so try the next one.

Method 2: Test Point (for Mediatek)

On devices with a Mediatek processor (for example, Redmi 9A/10A/Note 8), you can activate EDL- mode via Test Point, special contacts on the motherboard, which allows you to flash the phone without locking FRP.

⚠️ Warning: Disassembling the phone voids the warranty! This method requires:

• 🔧 Screwdrivers and plastic mediators to open the case.
• 🔌 Mi Flash Tool programmer and firmware for your model.
• 💡 Knowledge in soldering (some models need to close contacts).

Step-by-step:

1. Turn off the phone.
2. Remove the back cover and find Test Point (usually marked as TP or EDL next to the battery).
3. Close the contacts with tweezers or wire.
4. Connect the phone to a PC, and it will be defined as a Qualcomm HS-USB QDLoader 9008.
5. Swipe your device through the Mi Flash Tool (select the Clean All option).

⚠️ Warning: Incorrect firmware can stain the phone! On newer models (Xiaomi 13/14, Redmi Note 12), Test Point is often protected - once locked, the device can lock permanently.

3 method: Bypassing the SIM- card (for older versions of the MIUI)

On some old firmware (MIUI 10-11), you can fool the system by inserting a SIM- card with the Internet and using the vulnerability in the settings:

1. Put it in. SIM-map.
2. On the FRP screen, click Add Network (or Add Network).
3. In the network name field, type any text, highlight it and click Share (or Share).
4. Select Gmail or Messages, and this will open up access to settings.
5. Go to Settings → Accounts and add a new Google account.

This method doesn’t work on all devices and is often closed in new updates.

💡

Before using alternative methods to bypass FRP, be sure to try official recovery methods through Google or Mi Account.Illegal methods can result in IMEI blocking or loss of warranty.

What to do if nothing helps

If all of these methods fail, you have a few options:

1. Contact the previous owner (if the phone is purchased by hand) and ask them to delete their account remotely via myaccount.google.com (Security → Your Devices section).
2. Contact Xiaomi support (if the phone is officially purchased), you will need a purchase check, the cost of unlocking is from 1500 to 3000 rubles.
3. Some workshops offer FRP bypass service for 1000-2500 rubles, but there is a risk of running into fraudsters.
4. Sell the phone for parts if it's not valuable, and you can put it on Avito or Yula as a donor and return some of the money.

If you choose to use the service, make sure that the wizard uses legal methods. Some craftsmen sew phones through the Fastboot with a change of persist-partition, which can lead to problems with the IMEI or communication module.

⚠️ Warning: Forums often advise using programs like the Mi Account Unlock Tool or FRP Bypass APK. Most of them are viruses or fraudulent software. Don't download suspicious files!

How to avoid FRP problems in the future

To avoid getting blocked by FRP after a reset, follow these rules:

• 🔑 Unplug accounts before reset: Go to Settings → Accounts and Sync. Delete your Google account and Mi Account. Turn off Find Device (Settings → Google → Security).

Keep backup codes.

• Take a photo or print 8 Google backup codes.
• Save them in a safe place (e.g., Google Keep or on paper).
• 🔄 Set up Smart Lock: Go to Settings → Google → Manage Google Account → Security → Smart Lock. Add a trusted device (like your laptop).
• 📱 Check Mi Account: Make sure your Mi Account is linked to your phone (check Settings → Xiaomi Account). Update your email and phone in your Mi Account profile.

If you frequently drop your phone (for example, to test firmware), create a backup Google account specifically for this purpose and link it to the device, so you do not risk losing access to the main account.

fastboot erase userdata


fastboot erase metadata

This will completely delete all data, including linked accounts.-->

FAQ: Frequent questions about FRP on Xiaomi