Xiaomi Redmi 6, released in 2018, is still a popular budget smartphone due to reliable “stuffing” and support for MIUI. But even with such a proven device, users face the problem: the phone suddenly stops turning on. The reasons can be different from trivial battery discharge to software failures after the update. In this article, we will analyze all possible ways to turn on Redmi 6, including forced reboot, charging in a dead state and recovering via Fastboot. No water – only proven methods with explanations for beginners and experienced users.
It's important to understand that the algorithm of actions depends on the symptoms of the malfunction, for example, if the phone vibrates when you connect the charger, but the screen remains black, that's one scenario. And if the device does not show any signs of life (no vibration, no indication, no sounds), a different approach will be required. We structured the instructions so that you can quickly find a solution to your situation, and let's start with the simplest and move on to more complex methods.
1. Standard inclusion: checking basic things
Before you panic, make sure that the problem is not trivial things. Statistically, 60 percent of the Redmi 6's "fault" is due to a dead battery or mechanical locks.
🔋 Check the battery charge (connect to the network at 15)+ minute)
🔌 Try another cable/charger (original or Quick Charge 3.0-enabled)
🔒 Make sure the power button is not jammed (press with effort or clean from dust)
📴 Extract SIM-card and memory card (sometimes they block the download)
-->
If you have a battery indicator on the screen after you connect to charging (even for a fraction of a second), then the problem is the discharge.
- Connect your phone to the original charger (or with 5V/2A output).
- Leave on charging for at least 30 minutes - even if the indicator is not on.The battery could discharge to a level at which the controller blocks the onset.
- Try to turn on by holding the power button for 10-15 seconds.
If the charging indicator does not light up at all, check:
- 🔌 Cable and adapter: try charging another phone with the same set. If it doesn't work, the problem is that it's the same set.
- 🔋 Charging port: illuminate the flashlight in the connector USB-C — Are there any foreign objects or oxidation.
- 🔄 Another power source: connect to USB-port of the computer or power bank.
💡
If the phone isn't responding to charging, but you're sure the battery isn't dead, try plugging it into charging and holding the power button for 20 to 30 seconds at the same time, sometimes a wake-up call from the power controller.
2. Forced reset (Hard Reset)
If Redmi 6 doesn't turn on after charging or hangs on the MI logo, a forced reboot helps.This method resets temporary data in RAM and often solves problems with the system freeze. Important: this is not a factory reset — your data will remain safe.
Instructions for Xiaomi Redmi 6 (and its Redmi 6A/6 Pro versions):
- Hold the power button and increase the volume at the same time.
- Hold them for 10-15 seconds until the screen goes out (or the MI logo appears).
- Release the buttons and wait for the reboot (can take up to 2 minutes).
If the phone vibrates, but the screen remains black:
- 🔄 Repeat the procedure 2-3 times with an interval of 30 seconds.
- 🔋 Try to perform Hard Reset on charging (plug your phone to the network before holding the buttons).
- 📱 If you start the reboot with the word "No Command" it means that the phone is trying to enter Recovery mode, in which case release the buttons and wait, the system should boot automatically.
The phone vibrates, but the screen is black.
The MI logo appears and hangs.
No reaction to the buttons.
Other (describe in the comments)-->
Why does this work? Forced reboot clears the kernel cache and resets the states of the hardware components. Often the problem lies in the "hang" process android.system, which blocks normal booting. Hard Reset interrupts this process without losing data.
3. Enable via Recovery Mode (if the phone hangs on the logo)
If Redmi 6 is turned on but hangs on the MI logo or download animation, you will need to log in to Recovery Mode.This is an embedded Android environment that allows you to reset settings, clear the cache or reflash the device. Redmi 6 has two options for Recovery:
- 🔧 Stock Recovery (from Xiaomi) – limited features, basic operations only.
- 🛠️ Custom recovery (TWRP) — Extended features, but requires pre-installing.
Instructions for entering stock Recovery:
- Press the power button + increase the volume.
In the Recovery menu, use volume buttons for navigation and power button for confirmation.
| Operation | When to apply | Effects of consequences |
|---|---|---|
| Reboot system now | If the phone freezes when loading | Simple reboot without data loss |
| Wipe cache partition | If the system is slowing down or errors are coming out | Clearing the cache (app data will be saved) |
| Wipe data/factory reset | If the phone does not load after the update | Full reset (all data will be deleted) |
| Connect with MiAssistant | If you need to refashion the phone through the PC | Requires a computer connection and Mi Flash Tool |
⚠️ Note: If you choose to use Wipe data/factory reset, all data on the phone will be deleted, including photos, contacts and installed applications. Before you try other options or remove the memory card (if the data on it is important).
What happens if Recovery does not open?
4.Battery problems: how to "resuscitate" a fully discharged phone
One of the most common reasons why the Redmi 6 doesn't turn on is because the battery is so low that if the phone was dead for weeks (or months), the battery controller could go into sleep mode, and in that case, standard charging won't help, you need to wake up the battery.
Resuscitation methods:
- 🔌 Charging from a powerful source: use an adapter with an output 9V/2A or 12V/1.5A (So, for example, from a laptop. Connect the phone to a laptop. 1–2 Even if the indicator is not on.
- 🔄 «Power button push: plug in the charge, then press the power button every 5 minutes for 1-2 seconds.
- 🔋 Direct battery charging (for advanced): If you disassemble phones, you can remove the battery and connect it to a universal charger (e.g. iMax) B6) 3.7–4.2V.
⚠️ Warning: If the battery is swelling (as seen from the deformation of the back cover), do not try to charge it or turn on the phone. The bloated battery may ignite! In this case, immediately remove it (in gloves) and dispose of it.
How to check if the battery is still alive:
- Connect the phone to charge and leave for 30 minutes.
- Try turning it on by holding the power button for 20 seconds.
- If you have a vibration or a charging indicator, the battery is alive, and if it isn't, it's probably completely discharged or malfunctioning.
💡
If the phone doesn't show signs of life after 2 hours of charging, the problem may be a faulty power controller or a circuit break, in which case a diagnosis is required at a service center.
5. Fastboot firmware (if the phone doesn't turn on at all)
If Redmi 6 doesn’t respond to any manipulations (it doesn’t vibrate, charge, or turn on), the last option is Fastboot, which requires a computer and special tools, but it can bring the phone back to life even after serious crashes.
What you need:
- 🖥️ Windows computer (7/10/11).
- 🔌 Original. USB-cable (preferably the one that came with the set).
- 📥 Firmware for Redmi 6 (download from the official Xiaomi website or from the forum) 4PDA).
- 🛠️ Mi Flash Tool (the latest version can be found at xiaomiflashtool.com).
Step-by-step:
- Install Xiaomi drivers on your computer (download here).
- Unpack the archive with firmware in a folder without Cyrillic characters (for example, C:\Redmi6_Firmware).
- Turn off the phone (if it is on, hold the power button for 10 seconds).
- Press the power button + volume reduction and connect the phone to the computer via USB.
- Open the Mi Flash Tool, press Select and point the path to the firmware folder.
- At the bottom, select Clean All or Clean All and Lock.
- Press Flash and wait for the process to end (5-10 minutes).
⚠️ Note: Fastboot removes all data if you choose Clean all and lock mode, and there is a risk of bricking your phone if you interrupt the process or use the wrong firmware. If you are not sure about your actions, you should contact the service center.
If the phone does not turn on after the firmware:
- 🔄 Try a different firmware version (e.g., older or global firmware). ROM China ROM).
- 🔌 Check if the phone is detected in Windows Device Manager (Qualcomm should appear) HS-USB QDLoader 9008).
- 🛠️ If the firmware was successful, but the phone does not start, the motherboard or battery may be faulty.
6. Hardware malfunctions: when to carry in the service
If none of the above methods worked, the problem is likely hardware, and here are the signs that self-repair is pointless or dangerous:
- 🔥 The phone overheats when connected to charging (may indicate a short circuit).
- 💧 On the motherboard, traces of oxidation or corrosion are visible (for example, after moisture enters).
- 🔋 The battery is swelling or deformed.
- 📱 The phone fell from a height or was subjected to severe mechanical stress.
- 🔌 When connected to the charger, the smell of burning or smoke is heard.
Typical malfunctions of Redmi 6 and their signs:
| Malfunction | Symptoms | Cost of repair (approximately) |
|---|---|---|
| Faulty battery | No charge, the phone turns off at 30-40% | 1 000–1 500 ₽ (substituted) |
| Damaged power controller | It does not charge, does not turn on, but responds to buttons. | 1 500–3 000 ₽ (Depends on the controller model) |
| Oxidation of the motherboard | The phone turns on after a while, the sensor glides. | 2 000–5 000 ₽ (cleaning + ration) |
| Faulty charging connector | Charging is only in a certain position of the cable. | 800–1 500 ₽ (plug-in) |
⚠️ Warning: If you suspect your phone has been in water, do not charge it! First, dry the device completely (at least 24 hours in rice or silica gel) and then try to turn it on. Connecting a wet phone to electricity can cause a short circuit and irrevocably damage the motherboard.
Where to look for a service center for Xiaomi:
- 📍 Official SC: list on the Xiaomi website (guarantee is maintained).
- 🔧 Unofficial workshops: look for good reviews on Yandex.Maps or 2GIS.
- 💬 Communities: in forums 4PDA Or Mi Community can find repair recommendations in your city.