Xiaomi Redmi smartphones are known for their reliability, but even they sometimes refuse to turn on after discharging, updating or mechanical impact. If your device does not respond to the power button, do not panic - in 90% of cases, the problem can be solved independently without contacting the service center. This article will help you figure out how to correctly turn on any Redmi model (from Redmi 4X to Redmi Note 13 Pro+), even if the screen remains black or the phone is stuck on the logo.
We will look at all possible scenarios, from standard onset to forced reboot and recovery via Fastboot. Particular attention will be paid to typical user errors that can aggravate the situation, for example, multiple presses on the power button when the battery is discharged or attempts to charge the phone with an unoriginal cable.
Important: The instructions in the article are universal, but some features (such as button combinations for Recovery Mode) may differ depending on the model and version of MIUI. For accuracy, specify the specifications of your device in the official documentation of Xiaomi.
1. Standard on: Power button
The most obvious way is to hold the power button, but even here, there are nuances that many people don't know about. On most Redmi models (e.g. Redmi 9A, Redmi Note 10 Pro), the power button is located on the right end of the case.
- Connect the charger (preferably original) and wait at least 5 minutes, even if the charging indicator is not on.
- Hold the power button for 10-15 seconds until the MI logo or vibration appears.
- If the screen remains black, release the button and try again in 30 seconds.
⚠️ Warning: Do not press the power button more than 1 time per minute when the battery is discharged.This can lead to a deep discharge, after which the phone will not turn on even from charging without special equipment.
💡
If the phone doesn't respond to the power button, try plugging it into charging and holding the power + volume button for 20 seconds at the same time, which will force charging on some models.
On newer models (e.g. Redmi Note 12), the power button can be combined with a fingerprint sensor.
- 🔋 Do not put your finger on the sensor when you turn on – this can block the process.
- 📱 Hold the button strictly perpendicular to the body to avoid false alarms of the sensor.
- ⚡ If the phone vibrates but the screen doesn’t light up, try connecting it to your PC via a phone. USB — Maybe you need to re-flash.
Initiation via charger
If the phone is completely discharged, the standard power button press may not work.
- Connect the phone to the original charger (at least 10W).
- Leave it to charge for at least 30 minutes, even if the indicator is not on.
- Try turning on your phone by holding the power button for 10-15 seconds.
⚠️ Note: Using unoriginal cables or power supplies can damage the charging controller.If the phone is heated but not charged after connecting, turn it off immediately!
| Sign. | Possible cause | Decision |
|---|---|---|
| Charging indicator flashes red | Deep battery discharge | Charge 1-2 hours with the original ZU |
| The phone is heating up but not charging. | Faulty cable or power supply | Replace the ROM, check the USB port |
| Charging is underway, but the phone is not switched on | Software failure | Forced reset (see section 3) |
| The indicator is not on, the phone is cold. | Damage to battery or board | Contact the service center |
On models that support fast charging (for example, Redmi K50) can work protection against the onset at a low charge level.
- 🔌 Connect your phone to charge and leave for 1-2 hours without trying to turn on.
- 🔄 If the indicator does not light up after 2 hours, try another charger.
- 📊 Check the temperature of the case – if it is cold, the battery may be damaged.
3. Forced reset (Hard Reset)
If the phone is stuck on the MI logo, black screen, or doesn't respond to the power button, a forced reboot will help, which works on all Redmi models, but the button combinations may differ:
- 📱 For most models: Hold the power button + Increase volume 10-15 seconds until the phone vibrates.
- 🔄 For Redmi with Snapdragon processor: Power button + Reduce volume (e.g. Redmi) K40).
- ⚡ For older models (Redmi) 4/5): Power button + volume-button.
After the forced reboot, the phone should turn on as normal.
- Connect the phone to charge and repeat the procedure.
- If you have a Recovery menu, select Reboot → Reboot to System.
⚠️ Warning: Don’t confuse forced reboot with Wipe data resetting: the first method is data-safe, the second method will delete all files from the phone!
Make sure your phone is not charging | Choose the right button combination for your model | Hold the buttons for at least 10 seconds | After vibration release the buttons and wait 1-2 minutes | If it does not work, repeat with the connected charging-->
4. Enable through Recovery Mode
If the phone turns on but only boots to the MI logo or reboots cyclically, logging into Recovery Mode will help.
- 🔄 Restart the system without losing data.
- 📥 Install the update manually.
- ⚙️ Reset to factory settings (remove all data!).
To enter Recovery:
- Turn off your phone (if it is suspended).
- Hold the power + volume button until the menu appears.
- Use volume buttons for navigation and power button for selection.
From the Recovery menu, select:
- Reboot → Reboot to System – if you just need to restart.
- Apply update → Choose from SD card – if there is a firmware file on the memory card.
- Wipe data → Wipe All Data – Complete Settings Reset (will delete all data, including photos and apps!).
⚠️ Note: Some models (e.g. Redmi Note 8 Pro) may have Recovery menus in Chinese, in which case, focus on icons or use official documentation.
What if Recovery doesn’t have a Reboot to System?
5. Enable via Fastboot (for advanced users)
If the phone doesn’t even turn on in Recovery, but it reacts to a PC connection (defined as a Qualcomm HS-USB QDLoader 9008 or the like), you can try recovering it via Fastboot.
- 🖥️ Computer with installed Xiaomi drivers and ADB/Fastboot.
- 📁 Firmware file for your model (download from the official website).
- 🔧 Knowledge of working with the command line.
Step-by-step:
- Connect your phone to your PC in Fastboot mode (hold the power button + volume down when you connect USB).
- Open the command line and check the connection: fastboot devices must display the serial number of the device.
- Sweep the phone (example for Redmi Note 11): fastboot flash boot.img fastboot flash recovery.img fastboot reboot
⚠️ Warning: Wrong commands in Fastboot can permanently damage your phone.If you're not sure what you're doing, contact the service center.
💡
Fastboot mode is the last chance to restore the phone without replacing hardware components. If commands don't help, the problem is most likely the motherboard or battery.
6. Diagnostics of hardware problems
If none of these methods worked, it's possible that the phone has a hardware malfunction.
| Symptoms. | Possible cause | Decision |
|---|---|---|
| The phone does not respond to charging, does not warm up. | Damage to the power controller or battery | Replacement of battery or board |
| Vibrates when connecting charging, but does not turn on | Short circuit on the motherboard | Diagnostics in the service |
| The screen is black, but the phone is determined by the PC. | Damage to the display plume or graphics chip | Screen replacement or chip soldering |
| The phone turns on, but immediately turns off. | Failure of the battery or power connector | Battery replacement/connector |
Before visiting the service center:
- 🔋 Check the phone with another charger.
- 🔌 Check the port. USB for damage or oxidation.
- 📦 If the phone fell or got wet, tell the master about it - it will affect the diagnosis.
⚠️ Warning: Do not try to disassemble the phone yourself if you do not have experience. Violation of the sealed housing can lead to loss of warranty (if it is still valid) or additional damage.
Prevention of inclusion problems
To avoid situations where the phone refuses to turn on, follow these recommendations:
- 🔋 Do not allow full battery discharge (charge your phone at 10-15% charge).
- ⚡ Use only original or certified chargers.
- 📱 Regularly update the firmware through Settings → The phone. → Updating the system.
- 💾 Every 3-6 months, perform a soft reset (via Recovery) → Wipe Cache to clear temporary files.
- 🚫 Avoid mechanical impacts (shocks, falls) and moisture.
If the phone is rebooted or freezes frequently, check:
- 🔍 Body temperature – overheating may indicate a battery or processor malfunction.
- 📊 Free memory – less than 1 GB of available space can cause crashes.
- 🛠️ Apps – Remove suspicious programs that may conflict with the system.
💡
Regular maintenance (cache cleaning, updates, careful handling) reduces the risk of software failures by 70%, and most "faults" with the inclusion are solved by simply restarting or charging.