How to turn it on MIUI Xiaomi smartphone: 7 working ways

Shell MIUI — This is a branded interface from Xiaomi that is installed on all smartphones of the brand, but sometimes users face a problem when after an update, reset settings or a failed firmware, the system refuses to start. The screen can hover on the Mi logo, show a No command error, or not respond at all to the power button. In this article, we will discuss all possible reasons why it does not turn on. MIUI, and give step-by-step instructions for restoring the device’s operability – from the simplest methods to complex technical solutions.

It is important to understand that the algorithm of actions depends on the specific situation: for example, if the Redmi Note 12 smartphone does not turn on after a fall, it may be a hardware problem, and if the device is not turned on after a fall, it can be a hardware problem. POCO X5 We will review both scenarios and provide recommendations for preventing such failures. All methods have been tested on current models from 2023 to 2026, including the Xiaomi 14, Redmi Note 13 and the lineup. POCO F5.

1. Reasons why MIUI It doesn't include Xiaomi.

Before you start to recover, you need to identify the root of the problem. MIUI may not start:

• 🔄 Failed software update – interrupted firmware download through OTA or an error when installing custom firmware (for example, through TWRP).
• 📱 Resetting – if after a hard reset (Wipe Data) the system can not download user data.
• 🔋 Discharged battery – at a deep discharge (below 3%), the smartphone may not respond to charging and will not turn on.
• 🛠️ Hardware malfunctions – damage to the motherboard, display plume or power button (relevant after falls or moisture hits).
• 🚫 Lockdown MI-account – if the device was tied to a Xiaomi account and after reset requires authorization.
• 🐞 Application conflict is rare, but it happens that third-party software (for example, Magisk modules) blocks the system boot.

If your Xiaomi isn’t showing signs of life (it’s not vibrating, the charging light isn’t burning), check the charger and cable first. Try connecting your smartphone to another power source for 30 to 60 minutes. If the charging light catches fire, it’s a software problem. If it doesn’t, the battery or power controller may be faulty.

⚠️ Note: If you installed custom software before crashing (for example, LineageOS or Pixel Experience), do not immediately try to sew the official software. MIUI First, check the firmware compatibility with your model - the wrong version can turn the device into a brick».

2. The simplest ways to include MIUI (data-free)

Start with the safest methods that don’t require resetting settings or firmware. These will work if the smartphone responds to buttons but doesn’t boot to the desktop.

Forced reset

If Xiaomi is stuck on the Mi logo or black screen, try a hard reboot:

1. Press the power button for 10-15 seconds.
2. If it doesn’t work, then you need to squeeze the food at the same time. + Volume up for 20 seconds.
3. After vibration, release the buttons and wait for the reset.

This works 60 percent of the time if the system is temporarily frozen, and if the Mi logo comes back after the reboot and the download stops, move on to the next one.

Safe loading mode

Safe mode allows you to start MIUI If the system boots up, there's a problem with one of the software installed.

How to get in:

1. Turn off your smartphone (if it doesn’t respond, perform a forced reboot).
2. Press the Power button and hold until the Mi logo appears.
3. Once the logo appears, immediately press and hold the Volume button down until the download starts.
4. In the lower left corner of the screen should appear the inscription Safe mode.

In Safe Mode, remove newly installed apps or reset the cache (Settings) → Annexes → Clear the cache. Once the restart is normal, the problem should disappear.

Checking of charging and battery

If your smartphone doesn't respond to buttons and doesn't show signs of life, it could be a dead battery.

• 🔌 Use the original cable and power supply (at least 18W for modern models).
• ⚡ Connect to another source (computer, power bank, or other adapter).
• 🕒 Leave on charging for at least 1 hour - with a deep discharge, the indicator may not light up immediately.
• 🔋 If possible, check the battery for bloating (take care of the back cover – if it is curved, the battery needs to be replaced).

If after 2-3 hours of charging the smartphone does not show signs of life, but when connected to a PC is defined as Qualcomm HS-USB QDLoader 9008 is a sign of a hardware failure (most often a power or memory problem), which will require a diagnosis at a service center.

3. Recovery MIUI via Recovery Mode

If simple methods didn't work, the next step is to use a recaveri fashion. This is a special recovery mode built into Xiaomi. It allows you to reset, clear the cache, or install the update manually.

3.1 How to log in to Recovery Mode

Instructions for most Xiaomi/Redmi/POCO models:

1. Turn off your smartphone (forced if it doesn’t react).
2. Press the power + volume up at the same time.
3. Hold on until the Mi logo and recovery menu appear (usually 5-10 seconds).

On certain devices (e.g, POCO F4) You may need to first press the volume up. + Food, and after the logo appears, let go of Food, continuing to keep Volume up.

3.2. Cleaning the cache (Wipe Cache)

This method does not delete user data, but resets temporary system files that may cause crashes.

On the Recovery menu:

1. Select Wipe & Reset (navigation with volume buttons, choice with power button).
2. Then select Wipe Cache.
3. Confirm the action and wait for the completion.
4. Go back to the main menu and select Reboot.

If after cleaning the cache MIUI It doesn’t load anyway, move on to the next step.

Reset to factory settings (Wipe Data)

Warning: This method will delete all data on your device (photos, contacts, apps) if you have synced with Mi Cloud, some of the data can be restored after you log in.

Instructions:

1. From the Recovery menu, select Wipe & Reset.
2. Wipe All Data (or Factory Reset)
3. Confirm the action (a password may be required if a pattern lock has been installed).
4. After reset, select Reboot.

The first boot after reset can take 5-10 minutes, and if the system still does not start, the problem is deeper, and you need to flash it.

4. Flashing MIUI via Fastboot

If the resetting does not help, you will have to reinstall MIUI This method is suitable for cases where:

• 📱 The smartphone only loads to the Mi logo and does not go on.
• 🔄 After reset, there is a No command or Can't load Android system error.
• 🔧 You tried to install custom firmware, and the device stopped turning on.

You'll need firmware.

• 💻 Windows computer (recommended) 7/10/11).
• 🔌 Original. USB-cable (better from the set).
• 📁 Official firmware MIUI For your model (in.tgz or.zip format).
• 🛠️ Mi Flash Tool (you can download from the official website of Xiaomi).

Step-by-step instructions for firmware

Step 1. Download the firmware.

Go to the site. MIUI Downloads, select your model (e.g. Redmi Note 12 Pro)+ 5G) Download the latest stable version MIUI for the Global or EEA (The firmware must be in Fastboot format (not Recovery!).

Step 2. Install the drivers

Download and install Xiaomi drivers for Fastboot. Without them, the computer won't recognize the device.

Step 3: Launch the Mi Flash Tool

Unpack the downloaded firmware in a folder without Cyrillic characters (for example, C:\MIUI\rom). Open the Mi Flash Tool, press Select and point the path to the firmware folder.

Step 4: Connect your smartphone in Fastboot mode

Turn off the device. Press the Volume down. + Power and hold until the image of the hare in the hat-eared (Fastboot mode.

Step 5. Start firmware.

In the Mi Flash Tool, press Refresh, your device should appear in the list.

• Clean all – complete cleaning (recommended in case of serious failures).
• Clean all and lock – clean + lock the bootloader (if you plan to sell the phone).
• Save user data – saving user data (not always stable)

Press Flash and wait until it is completed (usually 5-15 minutes).

⚠️ Note: If you have an Anti-rollback error after firmware, you are trying to install an older version. MIUI, In this case, you need to download a newer firmware or use the Mi Unlock Tool to unlock the bootloader (but this will delete all data!).

5. Recovery MIUI through EDL (emergency)

If the smartphone is not included even in the Fastboot (for example, after a failed firmware or damage to the boot partition), there is a last chance – firmware through the boot. EDL (Emergency Download Mode: This mode allows you to reflash the device at a low level, even if the bootloader is damaged.

This will require:

• 💻 Windows computer.
• 🔧 Mi Flash Pro or QFil (for Qualcomm processor devices).
• 📁 Firmware in.mbn or.elf format (special version for the EDL).
• 🔑 Authorized Xiaomi account (some models require firmware permission).

How to log into EDL:

1. Turn off your smartphone.
2. Hold the Loud up. + Loudness down + Power and plug in. USB-plug-in.
3. Hold the buttons for 10-15 seconds. The screen will remain black, but the device will be identified in Device Manager as Qualcomm. HS-USB QDLoader 9008.

Firmware through EDL — It's a complex process that requires technical knowledge, and if you're not sure about your abilities, you should go to a service center, and if you do something wrong, you can actually put the device out of action.

💡

If your Xiaomi doesn't turn on after falling into the water, DO NOT TRY to sew it! First dry the device completely in rice or silica gel for at least 48 hours.

6. Frequent errors and their solutions

Reconstruction MIUI And users often encounter common errors, and we've collected the most common ones and how to fix them.

If your error is not listed in the table, try finding a solution in the forums. XDA Developers or 4PDA, specifying the exact device model and error text.

Prevention of failures MIUI

To avoid loading problems MIUI In the future, follow these recommendations:

• 🔄 Update software only through official channels – avoid custom firmware if you are not sure of their stability.
• 🔋 Keep an eye on battery power – don’t let it fall below 10%, especially before upgrading.
• 📱 Clean the cache regularly - in Memory settings → Cleaning or through Recovery.
• 🔒 Do not remove system applications – it can disrupt the work MIUI.
• 📁 Backup – Use Mi Cloud or third-party utilities like Titanium Backup.
• 🛡️ Do not unlock the bootloader unnecessarily – this increases the risk of “bricking” the device.

If you often experiment with firmware, keep on hand:

• The official firmware for your model.
• Mi Flash Tool with drivers.
• Spare cable and power supply.

💡

The most common cause of failure MIUI — Interrupted updates or incompatible firmware. Always check the software version before installing and make sure that the battery is at least 50%.

FAQ: Answers to Frequent Questions