How to remove the lock screen on Xiaomi: unlock PIN-code, password and pattern lock

The lock screen on Xiaomi smartphones is not only the protection of personal data, but also a frequent source of problems. Users face the need to remove it for various reasons: they forgot their password, bought a used phone with someone else’s. PIN-In this article, we'll look at all the current ways to remove the lock screen, from official methods through settings to bypassing security when access is lost.

It is important to understand that the procedure differs depending on the type of lock (PIN, password, pattern lock or fingerprint) and the firmware version (MIUI 12/13/14/15).Some methods require a linked Mi Account account, others work only if root rights are available. We will describe each option in detail so that you can choose the appropriate one.

If you're looking for a way to get around a lock on a stolen phone, we're going to warn you that it's illegal. This article is intended exclusively for device owners who have lost access to their own smartphone.

1. Remove the lock screen through settings (if you know the password)

The easiest way is to disable the lock directly from the settings menu, which is suitable if you remember the current one. PIN-code, password or pattern lock, but you want to remove the protection completely.

The instructions are relevant for all modern Xiaomi models (including Redmi Note 12/13, POCO X5/F5, Xiaomi 13/14) on MIUI 14/15:

1. Unlock your phone in the standard way (enter a PIN, password, or swipe a pattern lock).
2. Go to Settings → Screen Lock and Password.
3. Enter the current password for confirmation.
4. Select the type of lock screen.
5. Click No (or Remove the lock in older versions of MIUI).
6. Confirm the action - the lock will be disabled.

On some models (e.g. Xiaomi 13 Ultra), after disabling the lock, the system may require you to re-install it after 72 hours, which is a MIUI security requirement and cannot be circumvented without root rights.

Charge your phone at least 50% | Backup important data | Make sure you remember your current password | Turn off two-factor authentication (if enabled)

-->

2. reset the lock via Mi Account (if you forgot the password)

If you forgot. PIN-A code or a pattern lock, but your phone is tied to your Mi Account, you can restore access through Find Device, which only works when you have an active Internet connection on your phone (Wi-Fi or mobile data).

Step-by-step:

1. On your computer or other phone, go to account.xiaomi.com and log in to your account.
2. Select the Find Device tab (or Find the device in the Russian version).
3. In the list of devices, find a locked smartphone and click on it.
4. Select the Unlock Device option.
5. Confirm the action via SMS or email (depending on your account security settings).
6. Wait for the phone to restart – the lock will be reset.

Important nuances:

• 🔹 The device must be connected to the Internet (otherwise the team will not reach the device).
• 🔹 Find Device must be activated in the phone settings before locking.
• 🔹 Once unlocked, all data on the phone will be saved, but you may need to re-enter your Wi-Fi password and accounts.
• 🔹 In some models (for example, POCO F4 GT) After unlocking, you will need to install a new one. PIN-code.

💡

If Find Device is disabled, try connecting your phone to charge and wait for a low charge notification. Sometimes in this mode, an Emergency Call button appears, through which you can call another number and temporarily access the interface.

3. Hard Reset (complete reset) - radical method

If you don’t remember your password and have not tied your Mi Account, the only reliable way to unlock Xiaomi is to perform a hard reset, which removes all data from your phone, including photos, contacts and apps, so use it only as a last resort.

Instructions for most Xiaomi/Redmi/POCO models:

1. Turn off the phone with a long press of the power button.
2. Press the button combination: 🔘 Loudness up + Power for most models (e.g. Redmi Note 11, POCO X3 Pro). 🔘 Loudness up + Loudness down + Power for older devices (e.g. Redmi) 4X).

Mi

Recovery Mode

Wipe Data

Erase the data

Wipe All Data

Reboot

Once reset, the phone will boot as new, and you can set it up without locking it.

⚠️ Attention: On devices with MIUI 12 and later after Hard Reset, you may need to enter data from the previously tied Mi Account (Factory Reset Protection).If you do not remember the username / password, the phone will become a “brick” – you can unlock it only through the official Xiaomi service.

4. Bypassing the lock via Fastboot (for advanced users)

If Mi Account is not tied and Hard Reset is not suitable due to risk FRP-If you lock it, you can try to remove it through Fastboot mode, USB-cable and basic knowledge of working with ADB.

Step-by-step:

1. Install Xiaomi USB Drivers and Mi Flash Tool (the official Xiaomi website) on your PC.
2. Turn off the phone and put it in Fastboot mode: Press the Volume Down + Power button for 10 seconds.
3. Connect your phone to your computer via USB.
4. Open the command line (Win + R → cmd) and check the connection: fastboot devices must display the serial number of the device.
5. Run the command to unlock the bootloader (if it is locked): fastboot oem unlock On some models, you will need confirmation on the phone (volume button).
6. Delete the lock file (does not work on all firmware): fastboot erase frp or fastboot erase locksettings
7. Reboot the phone: fastboot reboot

The success of this method depends on the model and version of MIUI:

⚠️ Attention: Incorrect commands in Fastboot can lead to a blink (completely inoperable) of the phone. If you are not sure about your actions, you should contact the service center.

5. Removal of the lock through EDL-The mode (for experienced users)

Regime. EDL (Emergency Download Mode is a "emergency" firmware mode that allows you to reflash your phone even with a locked bootloader (EDL-cable or testpoint) and knowledge of working with flashware like Mi Flash Tool or QFil.

Instructions:

1. Download the official firmware for your model from the Xiaomi Firmware website.
2. Unpack the archive with firmware in a folder without Cyrillic characters.
3. Put the phone in mode. EDL: 🔧 Through testpoint (you need to disassemble the phone and close contacts). 🔧 Using the command adb reboot edl (if debugging is enabled by USB).

Mi Flash Tool

Clean All

Wait until the process is completed (10-15 minutes).

Advantages of the method:

• 🔹 It works even if your Mi Account is blocked.
• 🔹 Bypasses FRP-Protection of most models.
• 🔹 Restores the phone to a "factory" state.

Disadvantages:

• 🔸 Requires disassembly of the phone (risk of damage).
• 🔸 You need skills to work with the sewers.
• 🔸 Newer models (Xiaomi 14, Redmi Note 13) may not work due to hardware protection.

Reset via Mi Account|Hard Reset|Fastboot|EDL-regime|I haven't tried it yet.|Another way.-->

6. Alternative methods (without loss of data)

If you don’t want to lose data but have forgotten your password, you can try to bypass the lock using third-party tools. Note that these methods do not always work and may violate Xiaomi’s security policy.

Popular tools:

• 🛠️ Dr.Fone – Screen Unlock (Android): Paid software, supports removal PIN/password/pattern lock on Xiaomi without data reset. 60% model.
• 🛠️ iMyFone LockWiper: a similar tool with support MIUI 12-14. Requires a connection to the PC.
• 🛠️ ADB-Teams (if debugging is included) USB): adb shell rm /data/system/gesture.key or adb shell rm /data/system/password.key After completing, restart the phone.

Warnings:

• 🔴 Third-party programs may contain malicious code.
• 🔴 Method ADB It only works if the debugging is done. USB was turned on before the lockdown.
• 🔴 Nana MIUI 14/15 Many of the vulnerabilities used by these programs have already been closed.

💡

If the phone is synced with Google, after unlocking third-party tools, you may need to enter data from your Google account (FRP protection).

7 What should I do if nothing helps?

If all of these methods fail, there are two options:

1. Contact the Xiaomi Service Center. 📄 A check or warranty card confirming the purchase will be required. 💰 The cost of unlocking: from 1000 before 3000 RUB (depending on the model). ⏳ Term: 1-3 day-day.

• 🔑 Xiaomi provides official bootloader unlock codes through the site en.miui.com/unlock.
• 📅 Code waiting: up to 72 hours.
• 🔓 After unlocking the bootloader, you can sew custom firmware without blocking.

If the phone was bought by hand and the previous owner did not untie the Mi Account, the chances of unlocking are minimal, and in such cases the only legal way out is to contact the seller and ask him to remove the device from his account through Find Device.

FAQ: Frequent questions about removing the lock screen on Xiaomi