How to get out of Safe Mode on Xiaomi Redmi 8T: all working methods

Safe Mode on Xiaomi Redmi 8T is an Android diagnostic mode that automatically disables all third-party applications, leaving only system ones. It is activated when OS malfunctions, program conflicts or incorrect user actions (for example, when holding power buttons and volume during boot). While the mode is useful for troubleshooting, many users face the problem: the phone gets stuck in it and does not return to normal operation.

In this article, we will discuss 5 proven ways to disable safe mode on the Redmi 8T, including software and hardware methods. We will focus on the reasons for activating the mode, which will help to avoid repeated failures. If the standard reboot does not help, you will learn how to reset settings without losing data or return the phone to factory condition in a pinch.

All instructions are MIUI-adapted (including versions 12-14) and take into account the features of the Redmi 8T iron (Snapdragon 665 processor, 4 GB of RAM).

Why is Redmi 8T booting in Safe Mode?

Safe Mode on Xiaomi is not accidental. Here are the main reasons why your Redmi 8T can "hang" in Safe Mode:

• 🔄 Improper shutdown/reset: Holding the power button for more than 10 seconds or combinations + Loudness down during loading.
• 📱 Application Conflict: Viruses, Damaged APK-files or programs that request superuser rights (root).
• 🔋 Failures after the update: incorrect installation MIUI break-up.
• 🛠️ Hardware problems: faulty power or volume button, closing contacts.
• 🧹 Clearing the cache/data of system applications (e.g. com.android.systemui).

Most often, the mode is activated due to software failures that can be fixed without visiting the service center, but if the problem occurs after a phone drop or moisture, the cause may be a physical failure, in which case a diagnosis is required.

⚠️ Warning: If the screen shows "Safe Mode" in the lower left corner, but the phone is stable, don't panic. It's a standard diagnostic mode, and you can turn it off using standard methods.

Method 1: Standard Resetting

In 80 percent of cases, leaving Safe Mode on Redmi 8T is solved by a simple reboot.

1. Hold the power button for 5-7 seconds until the off menu appears.
2. Click on “Restart” and confirm the action.
3. Wait for the system to load fully (usually 1-2 minutes).

If the mode remained active after the reboot, try forced shutdown:

• 🔋 Hold the power button for 15-20 seconds until the screen goes out.
• 🕒 Wait 30 seconds, then turn on the phone with the power button.

On the Redmi 8T with MIUI 12+, double reboot sometimes helps: turn off the phone, wait for vibrations, then immediately hold the power + volume up until the Xiaomi logo appears.

Method 2: Removing Problem Applications

If Safe Mode is activated due to a conflict of programs, you need to find and remove the culprit. In Safe Mode, all third-party applications are disabled, so:

1. Go to Settings → Applications → Application Management.
2. Sort the list by installation date ("Last").
3. Remove applications installed in the last 1-2 days (especially from unknown sources).
4. Check the system utilities: com.miui.securitycenter, com.android.settings – their cache is better not to clean!

Typical "culprits":

• 🛡️ Antivirus (360 Security, Clean Master).
• 🎮 GameGuardian, Lucky Patcher).
• 🔧 Applications for root rights (KingRoot, Magisk).
• 📱 Launchers (e.g. Nova Launcher in conflict with the MIUI Launcher).

⚠️ Note: Do not remove Xiaomi system apps (e.g. com.xiaomi.midrop or com.miui.gallery) – this can lead to a “bootloop” (a loopy reboot).

Method 3: Clearing the cache and data of system applications

If uninstalling the software didn't work, the problem could be in the damaged cache of the system services. On Redmi 8T, it's treated like this:

1. Go to Settings → Applications → Application Management.
2. Click on the three dots in the top right corner and select "Show Systems."
3. Find and open: Settings (com.android.settings) Launcher (com.miui.home) System interface (com.android.systemui)

"Clear the cache."

"Clean the data"

com.android.settings

After cleaning, be sure to restart the phone. If the problem was in the cache, the mode will turn off.

💡

If the phone is slowing down after cleaning the cache, optimize in Settings → Battery and Performance → Optimization. This will restart the background processes.

Method 4: Resetting settings to factory

If the previous methods didn't work, you'll have to resort to a hard reset, which will delete all the data, so back up first:

1. Connect your phone to your PC and copy important files (photos, contacts, messages).
2. Go to Settings → About Phone → Backup and Reset.
3. Select “Resetting” and confirm the action.
4. After restarting, set your phone as new.

If the phone doesn’t respond to touch or freezes in Safe Mode, use a hardware reset:

1. Turn off Redmi 8T (hold power for 20 seconds).
2. Press Power + Volume up until the Mi logo appears.
3. In the Recovery menu, select “Wipe Data” (use volume buttons for navigation, power for confirmation).
4. Confirm the action and wait for the completion.

How to check:

1. Turn off the phone.
2. Carefully press each button individually – they should clearly return to the original position without delay.
3. Blow on the buttons or clean them with an alcohol tampon (do not use liquids!).
4. If the button “fails” or clinites – a replacement is required (refer to the service).

On Redmi 8T, the volume button down when held during boot force activates Safe Mode. If it sticks, the phone will boot in this mode constantly.

How to prevent the re-enablement of Safe Mode?

To avoid recurrence, follow these recommendations:

• 📲 Update. MIUI: Go to Settings. → The phone. → Update the system and install the latest version.
• 🛡️ Use official apps: download programs only from Google Play or Mi App Store.
• 🛠️ Do not set root rights without experience – it violates stability MIUI.

If the problem occurs after connecting to the PC, check the data transfer mode:

1. Connect the phone to the computer.
2. Swipe down the notification bar and click on “Charge via USB”.
3. Select “File Transfer” instead of “Facing Only”.

💡

Turn on Settings → Additional → Developer → USB debugging only when needed. This mode may conflict with some applications.

FAQ: Frequently Asked Questions About Safe Mode on Redmi 8T