How to remove safe mode on the phone Xiaomi: all the ways of 2026

Safe Mode on Xiaomi, Redmi or Poco smartphones is a diagnostic mode that automatically disables all third-party apps, leaving only system ones. It can turn on after a failed update, an app malfunction or even accidentally pressing a combination of buttons. The main problem is that messengers, social networks and many MIUI functions do not work in this mode.

If your Xiaomi is stuck in safe mode, don't panic, it's not a breakdown. 95% of the time, the problem is solved in 1-2 minutes without going to the service center. We've compiled all the current ways to exit Safe Mode, including hidden methods for models on MIUI 14/15 and HyperOS. Importantly, some solutions depend on the firmware version and phone model - there is a compatibility table in the article.

Why Xiaomi Phone Is Booting in Safe Mode

There are three main reasons why Xiaomi has activated Safe Mode, but each requires different actions to solve:

• 🔄 Software failure: application conflict, failed update MIUI It's a launcher malfunction, most commonly after an airborne update is installed" (OTA).
• 🔑 Hardware combination: random clamping of buttons Volume down + Power during reboot (on some Poco models, this is the standard way to log into Safe Mode).
• 🛠️ Damage to system files: Rare case where mode is turned on due to partition damage /system (For example, after a failed rooting or firmware through Fastboot).

On Xiaomi 12/13/14 and Redmi Note 11/12, the safe mode can be turned on even after a hard reset via Recovery, if there were firmware problems before.

⚠️ Warning: If the lock screen shows "Safe Mode" in the lower left corner, but the phone is working fine, it's not a malfunction. MIUI It signals a temporary restriction of function.

Method 1: Standard Reboot (works 80% of the time)

The simplest method that works on most Xiaomi models, including Redmi 9/10, Poco X3/X4 and Mi 11/12 flagships.

1. Press the power button for 3-5 seconds.
2. In the menu that appears, select "Reboot" (or "Restart" in English firmware).
3. Wait for a full reboot (usually 30-60 seconds).

If the mode remained active after the reboot, try the forced reboot:

• 🔋 Press the power button on 10-15 seconds until the screen goes out.
• 🕒 Wait 1 minute (don’t turn on your phone right away!).
• 🔄 Press the Power button once for normal powering.

Make sure the battery is charged >15%|Turn off the charger (if connected)|Close all applications through the multitasking menu|Check if the volume buttons are clamped.-->

On some models (for example, the Redmi Note 8 Pro) the standard reboot does not work due to a bug in MIUI.

1. Reboot your phone in the usual way.
2. Immediately after the appearance of the Xiaomi logo, press Volume up + Power for 5 seconds.
3. Release the buttons and wait for the full load.

Method 2: Disconnecting through notifications (MIUI 12 and later)

Starting with MIUI 12, Xiaomi added the option to disable Safe Mode right from the notification panel, which works on all HyperOS models (including Xiaomi 14 and Redmi K70):

1. Swipe your finger down from the top of the screen to open the notification bar.
2. Find a notification with the text "Safe mode is on" (or "Safe mode is on").
3. Slip on the notification and the "Disable" button will appear.
4. Click "Disable" and confirm the action.

If there is no notification, try:

• 🔍 Flick all notifications down - sometimes it's hidden.
• 📱 Reboot the phone (mode 1) and check again.
• ⚙️ Enable system notifications to be displayed in Settings → Notifications → Additionally.

⚠️ Note: Some custom firmware (e.g. xiaomi.eu) may not have a button to turn off the notification.

💡

If the Safe Mode notification does not disappear after turning off, clear the System Settings cache through Settings → Applications → Application Management → Three Points → Show Systems.

Method 3: Reset the launcher settings (for MIUI and HyperOS)

If Safe Mode is turned on because of a failure in the shell MIUI Launcher or HyperOS Launcher, it will help to reset its settings. This method does not delete data, but returns the standard desktop view:

1. Open Settings → Applications → Application Management.
2. Slip three dots in the upper right corner and select "Show Systems".
3. Find the Louncher app (or MIUI Launcher/HyperOS Launcher).
4. Select "Storage" → "Clear Data" and "Clear Cache".
5. Reboot the phone.

The Poco Launcher shell models are similar, but the app name will be different.

• 📱 Desktop will return to standard (widgets and folders will disappear).
• 🔄 You may need to re-tune your gestures.
• 🔒 All applications and data will remain in place.

Method 4: Hardware reset (for hanging phones)

If the phone doesn’t respond to taps or is getting stuck on a logo labeled Safe Mode, a hardware reset will be required, which works on all Xiaomi models, but has nuances:

For phones with a physical power button (Redmi 9A, Poco M3):

1. Turn off the phone (press the power for 10+ seconds).
2. Press Volume up + Power and hold for 10-15 seconds.
3. Release the buttons when the Xiaomi logo appears.

For models with a touch button (Xiaomi 12T, Redmi K50):

1. Connect the phone to the charger.
2. Press Volume up + Volume down for 5 seconds, then, without letting go, press Power for another 5 seconds.
3. Release all buttons when vibrations appear.

⚠️ Note: On some models (Xiaomi Mi 10, Redmi Note 9 Pro) long-term button retention can lead to a hard reset (data loss).If the Recovery menu appears on the screen, select Reboot → System.

Critical information: On phones with a Snapdragon 8 Gen 1/2 processor (Xiaomi 12 Pro, Redmi K60 Pro), a hardware reset can cause a bootloader to lock if the bootloader has previously been unlocked.

Method 5: Fastboot Fastboot Fastboot (last chance)

If none of the methods worked, it's Fastboot, which is guaranteed to remove Safe Mode, but requires a computer and minimal technical skills.

• 📱 Phones that don’t go out of safe mode after all the manipulations.
• 🔧 Devices with damaged firmware (for example, after a failed update).
• 🔒 Models with a blocked loader (unlocking required).

Step-by-step:

1. Download the official firmware for your model (choose the Fastboot version).
2. Install ADB and Fastboot drivers on your PC.
3. Turn off the phone and press Volume Down + Power to log in to Fastboot.
4. Connect your phone to your PC and start the command: fastboot flash all [name file firmware].tgz
5. Wait until it is completed (10-15 minutes) and restart the device.

For models with HyperOS (Xiaomi 14, Redmi K70) use the Mi Flash Tool:

• 🖥️ Download the Mi Flash Tool.
• 📁 Unpack the firmware in a folder without Cyrillic symbols.
• 🔌 In the program, select "Clean all and lock" or "Clean all" (full reset).

Reboot.|Notification in MIUI|Launcher reset|Hardware discharge|Flip-flashing|Not yet.-->

What to do if nothing helps

If all methods are tried, but Safe Mode remains active, the problem may be:

1. Hardware damage: Loudness down (phone thinks it's pinched) is a problem, and the solution is to change the button in the service center.
2. Damage to section /system: It requires a complete re-flash through EDL-The mode (only for experienced users).
3. Blocking Mi Account: on some models (Xiaomi Mi 6, Redmi 5), the safe mode may be associated with linking to the account.

To diagnose hardware problems:

• 🔍 Check if the buttons stick (wiggle your finger).
• 🔌 Connect your phone to your PC and check logs through ADB: adb logcat | grep "SafeMode"
• 📱 Install an alternative firmware (e.g. Pixel Experience) to check.

💡

If the phone is only on in safe mode and does not respond to flashing, it may indicate damage to the motherboard, in which case a diagnosis is required in a service center with micro soldering equipment.

FAQ: Frequent questions about safe mode on Xiaomi