How to reset the settings of the robot vacuum cleaner Xiaomi: 3 working ways

Xiaomi’s robot vacuum cleaners are some of the most popular smart home assistants, but even they sometimes require a complete reset. Perhaps you sell a device, it started to glittle after a firmware update, or just want to return factory settings to clean the experiment. In this article, we will analyze all the current reset methods for Mi Robot Vacuum, Mi Robot Vacuum-Mop, Xiaomi Robot Vacuum E10/E20 and others – from the classic method through the button to hidden commands in the Mi Home application.

It’s important to understand that resetting isn’t just about removing a room map; it erases all user settings: cleaning schedules, no-go zones, suction settings, Wi-Fi data, and even cleaning history. Some models (such as the Xiaomi S7 or Xiaomi Mop 2 Pro) may require additional steps to completely clean the memory, and we’ll tell you how to avoid typical errors and what to do if the vacuum cleaner doesn’t respond to the reset.

When you need to reset the settings of the robot vacuum cleaner Xiaomi

Don't rush to reset the device when the first problem occurs, but here are the specific cases where the procedure is really necessary:

• 🔄 Selling or transferring a vacuum cleaner to another owner – so that a new user can link the device to their Mi Home account.
• 🤖 System failures: The robot constantly loses contact with the application, does not save cards, or gives an Error 10 error (a problem with the gyroscope).
• 📱 Change your Xiaomi account – if you changed your email or phone in your Mi Account and the vacuum cleaner is still tied to your old profile.
• 🔧 Failed firmware update, after which the robot began to work slower or stopped recognizing obstacles.
• 🏠 Moving to a new apartment to clear old maps of the premises and start over.

If your problem doesn't make it to this list, it might be enough to restart the vacuum cleaner (hold the power button for 10 seconds) or reinstall the Mi Home app.Reset is a last resort and will require a complete reconfiguration of the device after that.

Method 1: Reset via a button on the body (for all models)

This is the most versatile method that works even if the vacuum cleaner is not connected to Wi-Fi or the Mi Home app does not see the device. The instructions are suitable for most models, including the Xiaomi Mi Robot Vacuum 1/2/3, Mi Robot Vacuum-Mop P, Xiaomi Robot Vacuum E10 and others.

Step-by-step:

1. Turn off the vacuum cleaner by holding the ON/OFF power button for 3-5 seconds until the indicator goes out.
2. Find the Reset button on the case (usually hidden under the lid or next to the power button). Some models (such as the Xiaomi S5/S6) use a combination instead of a separate button.
3. Press and hold Reset (or ON/OFF + Home for models without a separate button) for 10-15 seconds until you hear a beep or flash a white indicator.
4. Release the button and wait for the reboot (the robot will emit a characteristic turn on sound).

On Xiaomi Mi Robot Vacuum-Mop 2 Lite and Xiaomi Robot Vacuum E10, the Reset button can be combined with the Home button.

1. Turn off the vacuum cleaner.


2. Press the Home button for 5 seconds - the indicator flashes orange.




3. Without releasing Home, press the power button once.




4 Hold both buttons for another 10 seconds until the double signal is heard.

Disconnect the vacuum cleaner from the charging station

Make sure the battery is at least 20% charged

Find the Reset button (see the instructions for your model)

Prepare a paperclip if the button is recessed-->

On Xiaomi Robot Vacuum X10+ and later, a reset via a button may require confirmation in the Mi Home app – after holding Reset, you will have to go to the device settings and complete the procedure there.

Method 2: Reset via Mi Home (no buttons)

If the vacuum cleaner is connected to Wi-Fi and displayed in the application, this method is simpler and safer, it is suitable for all models that support Mi Home or Xiaomi Home (including Xiaomi Mi Robot Vacuum-Mop Pro, Xiaomi Robot Vacuum S7 and others).

How to reset:

1. Open the Mi Home app and select your vacuum cleaner from the device list.
2. Go to Settings → General Settings → Settings Reset (or Additional Features → Reset on new versions of the application).
3. Confirm the action – the system will ask you to enter a password from your Mi Account.
4. Wait for the process to be completed (the robot will restart and emit an audible signal).

For example, in Mi Home version 6.5+ for Xiaomi Robot Vacuum E10 you need:

1. Go to the "Device Profile" (cog icon).


2. Select "Untie device".




3. Confirm the decoupling and wait for the reset.

Once reset via Mi Home, the vacuum cleaner will automatically unplug your account, and to use it again, you will have to re-link the device through the scan. QR-code (it is located on the bottom or in the instructions).

Method 3: Hidden reset via console (for advanced users)

This method is suitable for power users who want to perform a deep reset with the cleaning of all data, including hidden logs and cache.It requires a connection to the vacuum cleaner via ADB or special commands in Mi Home.

Warning: Incorrect use of commands can cause firmware to break, only if other methods have failed.

For Rockrobo-based models (e.g. Xiaomi Mi Robot Vacuum 1/2), you can use the command:

adb shell "echo 'factory_reset' > /data/miio/device.conf && reboot"

For new models (Xiaomi S7, Xiaomi Mop 2 Pro) the process is more complicated:

1. Connect the vacuum cleaner to the same Wi-Fi network as the computer.
2. Install Python and the Python-miio library:
3. Execute the command to receive the token:

mirobo --ip 192.168.x.x discover

Then send the reset command:

mirobo --ip 192.168.x.x --token YOUR_TOKEN raw_command '{"method":"miIO.factory_reset"}'

Where 192.168.x.x — IP-the address of the vacuum cleaner in your network, and YOUR_TOKEN — Unique device token (can be obtained through Mi Home or specialized applications like Token Extractor).

💡

If you don't know. IP-vacuum cleaner address, check the list of devices on the router or use the Fing app to scan the network.

What to do after resetting: setting up from scratch

After a successful reset, Xiaomi's robot vacuum cleaner will return to factory settings.

1. Reconnect the device via Mi Home (scan) QR-bottom-box).
2. Update the firmware - after reset, an outdated version of the software may stand.
3. Start the first cleaning to create a new map of the room.
4. Set up a schedule, no-go zones and other parameters.

On LDS-scanned models (such as the Xiaomi S6 or Xiaomi Mop 2 Pro), the first cleaning after reset may take longer – this is normal, since the robot scans the room again.

Typical post-reset problems and their solutions:

💡

If the robot detects an Error 9 error after reset, check the bumper, it may be contaminated or damaged, and clear the contacts with alcohol.

Frequent Resetting Mistakes and How to Avoid Them

Many users experience problems due to wrong actions, and here are the most common mistakes and ways to prevent them:

• ⚡ Resetting with low battery charge - if the charge level is below 20%, the process may be interrupted.Always charge the vacuum cleaner before resetting!
• 📶 Disabling Wi-Fi during reset via Mi Home will result in incomplete data cleanup.
• 🔧 Using the wrong button combination - the algorithm is different on different models.
• 🔒 Forgetting to untie the vacuum cleaner before selling it, the new owner can't tie it. Always do a reset after the detachment in Mi Home.

Another common problem is that the vacuum cleaner doesn't drop at all, and the reasons may be:

• 🛠️ Hardware locking – on some models (for example, Xiaomi Robot Vacuum) X10+) Reset is blocked if the robot is tied to an account with two-factor authentication.
• 📦 Damaged firmware – if the vacuum cleaner has previously been updated with errors, it may be necessary to flash through USB-OTG.
• 🔌 Power problems - if the battery is worn out, the reset may not be complete.Try connecting the vacuum cleaner to charging during the procedure.

💡

If the reset doesn’t work, try changing the region in Mi Home to Mainland China – sometimes this will unlock hidden features.

Xiaomi models for which reset is performed differently

Some Xiaomi robot vacuum cleaners have unique reset features, here's a quick guide to popular models:

Xiaomi Robot Vacuum X10+ and later (2023-2026) models may require SMS confirmation when reset, which is additional protection against theft. If you sell such a vacuum cleaner, untie it from your Mi Home account in advance.

FAQ: Answers to Frequent Questions About Xiaomi Reset

If your question is not covered in the FAQ, check the official documentation of Xiaomi for your model or contact support through the Mi Home app (Feedback section).