How to reset on Xiaomi 6A: a complete guide with photos

Xiaomi Mi 6A is a budget smartphone of 2017, which is still used by many users. Over time, any device begins to slow down, give errors or require preparation for sale. In such cases, a factory reset helps, a procedure that returns the phone to its original state. But how to properly reset the Xiaomi 6A if it is locked, does not turn on or just glitch?

In this article, you will find three proven ways to reset — through settings, using physical buttons and in Fastboot mode. We will discuss how to save important data before reset, what to do when you make errors, and why sometimes the smartphone does not respond to commands. And also answer frequent questions, such as whether it is possible to cancel the reset after it begins or how to restore data after a failed procedure.

1.Resetting preparation: what to do before the start

Resetting to factory settings deletes all user data: photos, contacts, messages, apps and settings. If you don't prepare in advance, you risk losing important information forever.

• 📱 Back up. Use the settings. → Additionally. → Backup and reset or third-party services like Google Drive, Mi Cloud.
• 🔋 Charge the battery to at least 50%.If the smartphone turns off during reset, it can lead to software failures.
• 📡 Disable your Mi Account. Go to Settings → Xiaomi account and log out of profile, otherwise after reset, you will need to enter a login / password.
• 🔐 Make sure you know the password from Google. after resetting Xiaomi 6A request the account data associated with the device (protection) FRP).

If you are selling or transferring your phone, delete it. SIM-A card and memory card before reset will prevent personal data from leaking, and check if a bank account is linked to the device (e.g. Sberbank Online or Google Pay).

⚠️ Attention: If on Xiaomi 6A custom-made TWRP Or root rights, a standard reset might not work, and you'll need to get some firmware through Fastboot.

2. Method 1: Reset via the settings menu (if the phone is turned on)

This is the easiest and safest method, but it only works if Xiaomi is the best. 6A It is activated and you remember the pattern lock or PIN-The instruction is suitable for resetting before selling or eliminating software lags.

Steps:

1. Open Settings (the gear icon on the main screen).
2. Go to the section Additional → Backup and Reset.
3. Select Settings Reset.
4. Remove all data and confirm the action.
5. Enter your password (if required) and wait until the process is complete.

The smartphone will reboot and start the cleaning process, which will take 3-10 minutes, and then you will see the screen of the initial setting, as after the purchase.

Battery charge > 50% | Backup created |Mi Account disabled |Google password known-->

⚠️ Note: If after resetting Xiaomi 6A Asks you to enter an old password and you don’t remember it – it’s a lock. FRP. Resolved by entering data from a previously linked Google account.

Method 2: Reset via buttons (if the phone is not switched on or locked)

If the Xiaomi 6A doesn’t respond to touch, is locked with a pattern lock, or doesn’t turn on at all, hardware reset via a button combination will help.

Instructions:

1. Turn off the phone (if it is on, press the power button for 10 seconds).
2. Press the Power button + Volume up at the same time and hold for 10-15 seconds until the Mi logo appears.
3. Release the buttons - you will be taken to the Recovery menu (navigation is carried out by volume buttons, the choice is by the power button).
4. Select Wipe Data (or Wipe & Reset in some versions).
5. Confirm the action by selecting Yes.
6. Once completed, select Reboot to reboot.

If the Recovery menu is in Chinese, look for the location of items: Wipe Data is usually second or third on top. Xiaomi 6A uses stock recovery, so custom firmware can not be installed through it.

4. Method 3: Fastboot reset (for power users)

If the first two methods fail (for example, because of a damaged Recovery), then the reset is left over via Fastboot, USB-Cable and minimal command line knowledge. 6A lock-down.

What you need:

• 💻 Computer with Windows (or Linux/macOS fixed ADB-driver).
• 🔌 Original. USB-cable (undamaged!).
• 📥 Archive with firmware for Xiaomi 6A (Fastboot version).
• 🛠 Mi Flash Tool (official utility from Xiaomi).

Step-by-step:

1. Download and install the Mi Flash Tool from the official website.
2. Unpack the archive with firmware in a folder without Cyrillic characters (for example, C:\Xiaomi\6A_fastboot).
3. Turn off the phone and press Volume Down + Power to enter the Fastboot (a hare in a hat-eared hat will appear).
4. Connect Xiaomi 6A to a PC. Android Bootloader Interface should appear in the Device Manager.
5. Launch the Mi Flash Tool, press Select and specify the path to the firmware folder.
6. Select Clean All mode and press Flash.
7. Wait for the end (5-10 minutes). The phone will reboot automatically.

1. to run the program on behalf of the administrator.

2. disable the antivirus (it can block drivers).

3. Use another USB-port (preferably) USB 2.0).

-->

Resetting via Fastboot completely reflashes the device, deleting even system files.This is the only way to bring the Xiaomi 6A back to life if it doesn't turn on or gets stuck on the logo. However, after the procedure, you will need to reconfigure all settings, including connecting to Wi-Fi and accounts.

Possible errors and their solutions

Even if you follow the instructions correctly, a reset on the Xiaomi 6A can end up in error.

Error 1: The phone will not turn on after resetting

Reasons:

• 🔋 The battery was drained during the process.
• 🔧 Firmware is damaged (especially if you interrupt Fastboot).
• 🛠 Maternity board malfunctions (less often).

Solution: plug in a charger for 30 minutes, then try to log in to Recovery or Fastboot again, and if it doesn't work, run the device again.

Mistake 2: Hangs on Mi logo after reset

This indicates that the system files are damaged.

1. Log in to Recovery and re-enact Wipe Data.
2. If it doesn’t work, flash your phone through Fastboot (method 3).

Error 3: Requires a Password After Reset (FRP)

Factory Reset Protection works if a Google account is linked to the phone, to unlock:

• 📧 Enter your email and password from a previously used account.
• 🔑 If you don’t remember the data, restore access through Google’s recovery page.
• 🚫 Do not use questionable services to bypass FRP — This may result in the blocking of the account.

💡

If the Xiaomi 6A doesn't turn on for more than 15 minutes after reset, don't panic. Connect it to charging for 1-2 hours, then try again. Often the problem is solved by a banal lack of power to start the system.

6.How to recover data after reset

If you haven't backed up, the chances of returning deleted files are minimal, but there are. Here's what you can try:

Method 1: Recovery through Mi Cloud

If the Xiaomi 6A was enabled synchronization with the Mi Cloud:

1. Sign in to i.mi.com.
2. Go to Devices → Your Xiaomi 6A → Backups.
3. Download the necessary files (contacts, notes, photos).

Method 2: Recovery programs

If you haven't set up sync, try tools like Dr.Fone, EaseUS MobiSaver, or Recuva, which scan your phone's internal memory for deleted files.

• 🔍 The effectiveness depends on how much data was recorded after the reset.
• 💰 Most programs are paid (free versions recover only a portion of files).
• ⚠️ Do not install the program on Xiaomi itself. 6A — It's going to overwrite the deleted data!

Method 3: Contacting a Service Center

If you have critical data on your phone, like work documents, you can go to a specialized lab, and they use professional equipment to extract information directly from the memory chip, and the cost of the service is from 5,000 rubles.

⚠️ Attention: No program guarantees 100% recovery after a reset.The best protection is regular backups!

7. Frequent questions about resetting Xiaomi 6A

8. Alternatives to resetting: when can you do without it

Resetting to factory settings is a last resort, and in some cases, the problem can be solved with less radical methods:

• 🐢 Brake system: clear the cache in Settings → Memory. → Clear the cache.
• 📱 Glutting apps: delete their data in Settings → Annexes → [Title of the programme] → Memory. → Clear the data.
• 🔒 Forgot the pattern lock: Unblock through your Mi Account (if it was tied to you).
• 🔄 No updates to the firmware: download the full package MIUI and install through Recovery.

If the problem is virus-related, try scanning your phone through Google Play Protection or antivirus (such as Malwarebytes). 80% of the time, this helps avoid a complete reset.

Now you know how to properly reset the Xiaomi 6A in any situation - whether it is preparing for a sale, fixing a crash or recovering from a failed update. The main thing is not to forget about backups and follow the instructions without haste. If there are nuances, write in the comments, help you figure out!