How to reset Xiaomi Redmi 4X to factory settings

Despite its age, the Xiaomi Redmi 4X is still a popular device due to its reliability and maintainability. However, over time, the MIUI operating system can accumulate software errors that lead to slowdowns, spontaneous reboots or a complete failure of the interface to respond to commands. In such situations, the only effective solution is to return the device to its original state, which allows you to eliminate deep system failures.

The reset procedure, often referred to as Hard Reset, completely clears the phone’s internal memory of user data, apps, and settings. This action must be done with extreme caution, since it will be almost impossible to return deleted information without prior backup. In this article, we will discuss in detail all available methods for restoring Redmi 4X, including working through the recovery menu and using the engineering mode.

Before you start taking action, make sure you understand the consequences of this process: Reset will affect all parts of user memory, including photos, contacts, messages and installed programs. If your phone is even partially functional and able to go online, be sure to back up important data in the Mi Cloud cloud service or on your computer so that you do not lose valuable files forever.

Preparation of the device for the discharge procedure

The first and most critical step is to prepare the Xiaomi Redmi 4X for radical changes in the software part. Insufficient battery power can cause the process of erasing data to be interrupted in the middle, which can damage the file system and turn the smartphone into a “brick”. The battery level should be at least 50-60%, and ideally the device is better connected to the charger immediately before the manipulation.

The second important aspect is the Google account and the Mi Account. Modern versions of MIUI firmware have built-in protection against theft. If you don't know the passwords from accounts that have been synced to your phone after reset, you won't be able to activate the device again, so it's highly recommended that you unplug accounts through the settings menu or at least remember your credentials clearly.

• 🔋 Check the battery level and connect the charger to guarantee power stability.
• ☁️ Synchronize contacts and photos with cloud services or copy them to the cloud SD-map.
• 🔑 Make sure to remember the passwords from your Google account and Mi Account tied to your smartphone.
• 📱 Extract. SIM-microSD card and memory card if you don’t want to risk data on them (although the reset usually doesn’t affect them, there is a risk of error).

⚠️ Warning: Removing a memory card before resetting is a best security practice. Although a regular reset should not format an external drive, randomly choosing the wrong item in the recavery menu can lead to data loss on the reset. SD-map.

It is also worth checking for important files in the MIUI, DCIM and Download folders. Often users forget about saved documents in messengers or navigation cards that take up a significant amount of memory.

Reset via Android Settings Menu (Soft Reset)

If the Xiaomi Redmi 4X operating system is stable and you can unlock the screen, the easiest and safest way to return factory settings is to use the built-in menu.This method does not require knowledge of special button combinations and is suitable for most users who just want to clean the phone of garbage or prepare it for sale.

First, you need to go to the main settings menu of the device. MIUI may differ depending on the firmware version (Global or China), but the logic remains the same. You need to find the section responsible for the general system settings, where the functions of memory management and recovery are hidden.

The algorithm of actions is as follows:

1. Open the Settings app (cog icon).
2. Scroll down and select Advanced Settings (in some versions, About the phone right away).
3. Find and click on the Recovery and Reset section.
4. At the bottom of the screen, select Reset option.
5. Make sure to check the box in front of Clear internal memory (or Erase all data).
6. Click the Reset button and confirm the action by entering the unlock password of the screen.

⚠️ Attention: After pressing the confirmation button, the process will go automatically. The phone will reboot and the Android logo with a progress indicator may appear on the screen. Do not try to interrupt this process, even if it seems to be hanging - in some cases, a complete memory cleanup on Redmi 4X takes 10-15 minute.

Once the procedure is complete, the device will restart and greet you with the screen of the initial setup, as if you just took it out of the box.All your personal data will be deleted and the systems will return to the state (factory).

Hard Reset with Recovery Menu (Recovery Mode)

In situations where the phone is not turning on, stuck on the logo or does not respond to touching the screen, the only option is to use Recovery mode, a special diagnostic interface recorded in the device memory separately from the main operating system, accessed by hardware buttons, which allows you to control the phone even when the touch screen is not working.

To get into the recovery menu on Xiaomi Redmi 4X, you need to perform a certain sequence of actions with the buttons. It is important to observe the timing, as the window to enter this mode can be short.

After turning it off, press the Volume Up and Power button at the same time, hold them until the Mi logo appears, and then the power button can be released, while still holding the volume. In a few seconds, the main Recovery menu will open.

This menu is controlled by volume buttons (moving up/down) and power button (selecting an item). The default interface language can be Chinese or English. If you see Chinese characters, there is usually an English switch button in the upper right corner.

To perform the reset, follow the following steps:

• 🔽 With volume buttons, select Wipe Data and press the power button.
• 🗑️ In the following menu, select Wipe All Data and confirm the choice.
• ✅ The system will ask for final confirmation – select Confirm.
• 🔄 Wait for the message Data wiped successfully and click Back to Main Menu.
• 🔌 Choose Reboot -> Reboot to System for normal reboot.

This is the most reliable way to revive a device that has stopped responding to software commands, ignores the operating system's state and operates at a lower level.

Use of the Engineering Menu and Fastboot

For advanced users who face more complex challenges, there is a Fastboot mode. Unlike Recovery, this mode is designed for low-level interaction with the device via a computer. Although a standard Fastboot data reset is not done with a single button, this mode is often necessary to flash the phone if the Recovery partition is damaged.

To enter Fastboot mode on Redmi 4X, you need to press the Volume Down and Power button at the same time when the phone is off. The image of a rabbit repairing an android with the inscription FASTBOOT will appear on the screen. To exit this mode without action from the PC, just press the power button and hold it for about 10-15 seconds until the phone vibrates and reboots.

However, if you plan to use a computer to reset, you'll need the ADB and Fastboot utility. By connecting your Fastboot phone to your PC, you can send a command to clear partitions. This requires an installed driver and basic command line knowledge.

fastboot erase userdata


fastboot erase cache

Executing these commands will completely remove the user partition and cache, which is equivalent to a hard reset. Be extremely careful: the wrong command in Fastboot mode can wipe critical parts of the bootloader, after which the recovery of the phone will only be possible in the service center using programmers.