Modern Xiaomi Pads and Redmi Pad tablets are powerful multimedia devices, but over time, even the most optimized MIUI or HyperOS system can start to work unstable. Users often face a slowdown in the interface, application freezes or the inability to log in due to a forgotten pattern lock. In such situations, the most effective solution is to return the device to its original state, which allows you to eliminate software errors and clean up internal memory from accumulated digital debris.
The Full Reset, or Hard Reset, removes all user data, including contacts, photos, installed apps and account logins. This is a radical but often necessary measure before selling a gadget or in preparation for a clean update installation. It's important to understand that once you press the confirmation button, there will be no way back, so pre-preparation is critical to the success of the operation. We'll take a look at all the recovery methods available, from standard menu settings to using Recovery's engineering mode.
In this article, you will find step-by-step algorithms for various scenarios, including situations where the tablet is not turned on or locked at all. We will pay special attention to the nuances of working with a Google account and Mi Account, since improper actions can lead to locking the device with security mechanisms.
Preparing the tablet for a complete data reset
Before you start actively cleaning up your memory, you need to perform a number of preparatory operations. Backup is the most important step that should not be ignored, since it will be impossible to recover deleted files without a backup. Make sure that all important documents, photo archives and correspondence are stored in the cloud or on an external medium.
It is also critical to check the battery charge level. The data partition formatting process can take 5 to 15 minutes, and a sudden power outage at this point can damage the system files. If the charge is less than 50%, connect the device to the original charger.
- 📸 Back up photos and videos via Google Photos or copy them to your computer.
- 📱 Keep your list of important contacts in your Google account phone book, not in memory. SIM-map.
- 🔑 Write down or remember passwords from your Google and Mi accounts, as they will be required to log in after a reset.
- 🔌 Connect your tablet to a stable Wi-Fi network to synchronize data before deleting it.
⚠️ Note: If the device is activated protection FRP (Factory Reset Protection, after reset, the system will require you to enter the login and password of the Google account that was the main one on this tablet.
Reset method through system settings menu
The safest and easiest way to get the Xiaomi Pad back to factory status is to use the built-in functionality of the operating system. This method is suitable for cases when the tablet turns on, the screen responds to touch, and you have access to the desktop. The algorithm of actions may vary slightly depending on the version of the MIUI for Pad shell or the new HyperOS, but the overall logic remains the same.
To start, open the Settings app and scroll down to About Device or Advanced Settings. Different versions of the firmware may call the desired partition differently, but the keyword here is Reset. Select Reset or Recover and Reset.
A warning will appear on the screen that all data will be deleted, the system will again check if you are confident in your actions, click the button "Reset" or "Clear all data", the device can request the entry of a screen unlock PIN or password from the account to confirm the operation.
☑️ Checklist before resetting through the menu
Once confirmed, the tablet will begin the cleaning process. The screen can go out and light up, and the center can display the Xiaomi logo or Android robot. Do not interrupt the process and do not try to restart the device manually until the screen of the initial setting appears.
Hard Reset via Recovery Mode (if the tablet is not turned on)
If the device is stuck on the logo, does not respond to touch, or you have forgotten the pattern lock, the only option is to use Recovery mode, a special diagnostic mode built into the tablet memory that allows you to control the system bypassing the main interface, which is entered into this mode by a combination of physical buttons.
Turn off the tablet completely. If it doesn't turn off in the normal way, press the power button for 10-15 seconds until the screen goes out. Then simultaneously press the Volume Up and Power button. Hold both buttons until the Mi logo appears, and then the power button can be released while you keep the volume down.
In the Recovery menu, you can control the volume buttons (up/down for moving), and the choice is confirmed by the power button. In some models with a touch screen, Recovery mode can also work with a touchscreen. You need to find Wipe Data or Clear Data.
- 🔍 Select Wipe All Data for a complete cleanup.
- ✅ Confirm the action by selecting Confirm.
- 🔄 After cleaning is complete, select Reboot to restart.
What to do if the Recovery menu is in Chinese?
⚠️ Warning: In Recovery mode, the touch screen may not work on some models. Use volume buttons to navigate menu items, even if the tablet is equipped with a display.
Resetting a forgotten password through Google Find My Device
If you forget your unlock password, but the tablet is connected to the Internet and has a Google account active, you can perform a remote reset.This method does not require physical access to the device buttons, but requires another gadget (smartphone or computer) to control.
Go to the official Google Find Device website from any browser. Log in to the same Google account that is linked to the blocked tablet. From the device list, select your Xiaomi Pad.
In the available control menu, select the option “Erase Device” (Erase Device), the system will warn that all data will be deleted without recovery. Once confirmed, the command will be sent to the tablet, and once it receives the signal, the reset process will begin.
| Resetting method | Access required | Data retention | Difficulty |
|---|---|---|---|
| Through Settings. | Access to the menu | Just the backup. | Low. |
| Recovery Mode | Physical buttons | No. | Medium |
| Google Find My | Internet and account | No. | Low. |
| Xiaomi Cloud | Mi Account and internet | No. | Medium |
Using the Xiaomi Cloud Service
An alternative to Google’s tools is the manufacturer’s own ecosystem. If the tablet has been activated Mi Account and enabled the “Search for Device” function, the reset can be done through the i.mi.com web interface. This is especially true for users who prefer Xiaomi services.
Go to the site from your computer and log in under your Mi Account. Go to the "Device Search" section. If the tablet appears on a map or in a list, select it. The "Wipe" button will be available in the action menu.
This method is only effective when the tablet is actively connected to Wi-Fi or mobile Internet. If the device is offline, the command will be executed automatically as soon as it goes online. This can be useful if the tablet is stolen, although in this case the priority is more often locking, not resetting.
💡
Before selling a tablet, be sure to log out of all accounts (Google and Mi) manually through settings, and then make a reset.This ensures that the new owner does not have to prove ownership of the device.
Solution: Problems after reset and FRP
Once the reset and reboot process is complete, the initial setup phase begins, where users often encounter FRP (Factory Reset Protection) protection, and if the tablet requires you to enter a password from an account that was previously used, it is not an error, but a regular security feature.
Enter your Google account. If you recently changed your password, use your old password or restore access through Google's site on another device. Sometimes it takes up to 24 hours for the system to sync the security data.
If the tablet is slow to start working right after the reset, give it time, and in the background, you index files, update apps, and sync contacts, and that's normal for the first 30-60 minutes of operation.
⚠️ Warning: Do not try to repeatedly enter incorrect passwords from your Google account after a reset, which may result in a temporary blocking of your account or device for several hours.
Optimizing the tablet after returning to factory settings
A clean system is a great start, but to make the Xiaomi Pad work as efficiently as possible, it is recommended to perform a number of settings immediately after the first turn on.
Check for system updates. Go to Settings → About Device → MIUI/HyperOS. Often, factory firmware on new devices contains bugs that are fixed in the first updates. Also update all Google Play system services through the app store.
Set up energy saving for frequently used applications. On Xiaomi tablets, an aggressive energy saving system can unload applications from memory. Go to the battery settings and select No Limits mode for instant messengers and work tools.
💡
Regularly restarting the tablet (once a week) helps to clear the RAM cache and prevents the accumulation of system errors, prolonging the life of the device.
In conclusion, regular maintenance of the device, including deleting unnecessary files and monitoring installed applications, will avoid the need for frequent full resets. Use the capabilities of cloud storage to automate backups, so that data can be recovered in minutes if necessary.