The Chinese giant’s modern wireless headphones have become incredibly popular due to their excellent price-performance ratio. However, even the most reliable devices sometimes encounter software errors that can disrupt the normal operation of an audio device. Users often face situations when the gadget stops connecting correctly to a smartphone, the sound begins to break, or one of the headphones simply refuses to work in pairs.
In such cases, the most effective solution is to completely reset the device to a factory state, which allows you to clean the internal memory of the gadget from accumulated errors and restore the original connection parameters. Hard Reset is a universal diagnostic method that helps to eliminate 90% of software malfunctions without the need to contact a service center.
The recovery process may vary depending on the model and series of the device. Some models require mechanical action on the touch panels, while others require a specific sequence of actions with a charging case. In this article, we will discuss in detail the algorithms for the various Xiaomi and Redmi product lines so that you can bring your headphones back to life.
⚠️ Before starting the procedure, make sure that the charging case and the headphones themselves are charged at least 50% to avoid interrupting the process in the middle.
When a complete headphone reset is required
Many users mistakenly believe that you only need to reset when the gadget is completely inoperable. In fact, there are a number of symptoms that indicate the need for a preventive reset. If you notice that battery life has decreased dramatically for no apparent reason, this may indicate a failure in the power controller, which is often corrected by rebooting the configuration.
Another alarming sign is the de-synchronization of the left and right headphones. In normal TWS (True Wireless Stereo) mode, devices must work as a unit, transmitting sound simultaneously, and if you hear echoes, delays or sound coming from only one channel, then communication between the modules is disrupted and requires a forced reconnection.
It’s also worth resetting if the device doesn’t appear in the list of available Bluetooth gadgets on your smartphone, although there have been no problems before. Sometimes the phone’s software and headphones conflict after an operating system update, in which case cleaning the pairing memory helps the device re-enter the authorization procedure and start transferring data correctly.
- 📉 A sharp drop in volume or sound quality even at maximum settings.
- 🔌 Headphones do not charge in the case or the indicator is lit incorrect color.
- 📱 The device is not defined by the phone, but is visible to other gadgets.
- 🎧 One earphone works, and the second is silent or makes extraneous noises.
Don’t ignore these signs, as a software failure can lead to more serious battery problems over time.Timely resetting is a simple prevention that takes only a couple of minutes, but can significantly extend the life of your acoustics.
Preparation for the resetting procedure
Before you start taking action, you need to perform a number of preparatory steps, which will ensure the security of your data and ensure the successful completion of the operation, the first step should always be to remove the old profile of the device from the memory of your smartphone or tablet.
To do this, go to your mobile device's Bluetooth settings. Find your headphones (such as Mi True Wireless Earbuds Basic 2 or Redmi Buds 3 Pro) in the list of connected gadgets. Click on the gear icon or information icon next to the name and select the "Forget the device" or "Disable" option. This is a critical step, because if you don't delete the old record, the phone may try to automatically reconnect with the wrong settings immediately after reset.
After deleting the profile, be sure to turn off Bluetooth on the phone.This will prevent attempts to automatically connect during the reset process, which can knock the headphone algorithm. Put both earphones in the charging case and make sure that the contacts are clean and the device has started charging, as the indicator usually signals.
⚠️ Note: Do not attempt to reset if the headphones are in the ears or one is lying on the table – both modules must be in the case for proper initialization.
Many modern models, such as the Mi True Wireless Earphones 2 or the more expensive Mi Buds, feature a physical control button on the case of the charging case, which is the easiest and most reliable method, since it eliminates errors associated with the sensitivity of the touch panels.
First, place both earbuds in the charge case. Make sure the case lid is open. Find a function button that is usually located on the back of the case or inside between the headphone compartments. You need to press and hold this button for 10-15 seconds.
In the process of holding, watch the LED light, which will flash white or orange in most models, signaling the beginning of the memory cleanup process, and only release the button when the light flashes several times in a row or changes the color of the glow, which will mean a successful reset.
What to do if the button does not respond?
If you press the button, the indicator doesn't light up, check the case charge. The battery is probably completely drained. Also make sure you press the function button, not just the lid. In some rare cases, the button can be locked software, then only a complete discharge of the device will help. After successful completion, the headphones should light up, showing that they have switched to pairing mode. Now you can turn on Bluetooth again on the phone and search for new devices. The headphones will display as new, previously unconnected gadgets. Reset on the headphones will only help complete the discharge of the device. After the procedure, the headphones on the headphones should be used on the Redmimis, the Red Mimis often have such as the Redmis and the sensors, the Red Mimis, and the Red Mimis, the Red Mis, and the Red Mis, the Red Mis, the Red Mis, and the popular ones on the Red Mis, the Red Mis, the Red Mis, and the Red Mis, the Red Mis, the Red Mis, the Red Mis, and the Red In these devices, the touch panels on the headphones themselves act as the control, and the reset process is more subtle and requires precision of movement. You need to turn them off by squeezing the touch zones on both earbuds simultaneously for 5-7 seconds until the lights go out. After turning them off, put them back in the case and then immediately retrieve them. Hold the touch areas on both earbuds for about 20 seconds at the same time. It's important to keep your fingers on even if you hear voice cues or see the lights flashing. You need to wait for the lights on both earbuds to flash red quickly 2-3 times. This is the signal that the factory settings are restored and the Bluetooth memory is cleared. 👆 Press the sensors of both headphones simultaneously without letting go. ⏱️ Hold for about 20 seconds until triple red blink. 🔁 Put the headphones back in the case to complete the cycle. If you didn't work the first time, don't despair. The sensors may be too sensitive, or they may require a tighter press, or try changing the force of the press or the angle of the touch. Sometimes it helps to pre-clean the sensors from fat and dust, as contamination can interfere with the correct reading of the command. Features of resetting different models Xiaomi audio devices is huge, and every year new models with unique controls. Some devices, such as Mi Buds 3T The Pro or Xiaomi Buds 4 may have its own nuances in the reset procedure that differ from standard algorithms (ANC) The process may be a little more complicated. Sometimes required sequence: remove from the case, press 5 You can use a sensor to enter the test mode, and then reset. But for most users, a universal method of holding the sensor for a period of time is enough. 20-30 Below is a table that will help you navigate reset methods for popular models: Headphone model Holding Time Control Indicator of success Redmi AirDots / Earbuds Basic Sensor (20 sack) 20-25 The second is the triple flashing of the red Mi True Wireless Earphones. 2 The button on the case 10-15 White flashing of the Redmi Buds indicator 3 Lite Sensor (5 once) 5 Quick presses Voice confirmation Xiaomi Buds 3T Pro Sensor (10 sack) 10 Orange flashing always pay attention to the color of the indicator. Green usually means normal operation or charging, red means low charge or reset mode, and white/orange means pairing mode. Understanding the color indication will help you diagnose the device's condition more quickly. 💡If you have a model with wireless charging, put the case on the charging pad before resetting - this ensures that the process will not be interrupted due to a dead battery. After you have reset to factory settings, the headphones go into standby mode. At this stage, it is important to perform the first pairing correctly to avoid recurring problems. Turn on Bluetooth on your smartphone and start looking for devices. The name of your headphones should appear on the list of available devices. Note that if you previously had two identical names on your list (e.g., two AirDots) then only one profile should remain after the reset. If you see two devices, select one, connect, and then delete the second from the list. If the connection is successful, check the sound, play music or video, check the microphone in the recorder, the stereo should work synchronously. If there is sound in only one headphone, try playing the audio and then re-placing both headphones in the case so that they sync with each other inside the charging case. ⚠️ Warning: After reset, the headphones can connect to the last device automatically. If they are not, temporarily turn off Bluetooth on your other gadgets (tablet, laptop) that were paired previously. In rare cases, you may need to update your firmware through the Mi Wear app or Xiaomi Earbuds. After reset, go to the app, find your headphones and check for updates. The new version of the software may contain bug fixes that caused you to reset. 💡Proper repairing requires removing all old device profiles from the phone's memory before a new connection (FAQ) Why don't you reset your headphones to your phone? Chances are that you have an old conflicting profile in your phone's memory. Go to Bluetooth settings, find all the records associated with your headphones, click "Forget the device" for each of them. Then turn off and turn on Bluetooth again and try to search again. Can I reset the headphones if one of them is discharged? No, both earphones must be charged to reset correctly. If one of them is discharged, it won't be able to take the reset command or sync with the paired device. Be sure to charge the case and headphones before starting the procedure. Are equalizer settings reset after Hard Reset? Yes, full reset returns all software settings to factory settings. This means that any custom equalizer settings, if stored in the headphones' memory, will be deleted. The settings in the equalizer app on the phone may be saved, but better checked. What if the indicator is on red and does not flash when reset? Continuous red light usually indicates a critically low battery charge. 30-40 If the problem persists after charging, one of the batteries may have malfunctioned or the contacts in the case may have been contaminated.