Why might you need to reset Xiaomi headphones?
Xiaomi's wireless headphones are some of the most popular on the market because of their combination of price, sound quality and functionality. But even the most reliable technology sometimes fails: the headphones stop connecting to the phone, one of them doesn't work, there are problems with sound or microphone, and 80% of these problems are solved by factory resetting, a procedure that returns the device to its original state, as if you just unpacked it.
Resetting is especially relevant if you are faced with:
- 🔌 Connection issues – Headphones are not on the list of available Bluetooth devices or are permanently disabled.
- 🔊 Distortions of sound - cracking, interruptions, different volume in the left and right earphone.
- 🔋 Incorrect operation of the battery - fast discharge, incorrect display of the level of charge.
- 🤖 Failures after firmware updates – headphones stopped responding to touches or voice commands.
It is important to understand that resetting is not a panacea, but the first step in diagnosis, and if there are problems after it, it may be a physical failure (for example, damage to the speaker or contacts of the charging case), in which case repair or replacement will be required.
Preparation for resetting: what to do in advance
Before you start resetting, follow a few simple steps to avoid additional problems:
- Check the charge level. Make sure that the case and headphones have enough power (at least 30%) If the charge is critically low, plug the case into charging for 10-15 minutes.
- Turn off the headphones from all devices. Go to your Bluetooth settings on your smartphone, find Xiaomi in the list of associated devices, and select “Forget” (or “Unplug”).
- Remove the headphones from the case. They must be out of charge to reset.
If you use headphones with the Mi Home or Xiaomi Wear app, close it before resetting. In rare cases, the app's background processes may interfere with the procedure.
⚠️ Warning: Do not try to reset your headphones if they are wet or exposed to moisture.This can short circuit.Let them dry completely within 24 to 48 hours.
Make sure the headphones are charged|Disconnect from all devices via Bluetooth|Take the headphones out of the case|Close Xiaomi applications (if used)|Check for no moisture-->
Resetting methods for different models of Xiaomi headphones
The reset procedure depends on the headphone model. Below we will look at the instructions for the most popular series. If your model is not on the list, try the universal method (described in the next section).
| Model headphones | Resetting method | Notes |
|---|---|---|
| Xiaomi AirDots (1/2/3 gen), AirDots Pro | Press the touchpad on both headphones for 10-15 seconds until the indicator flashes red/white. | AirDots 3 Pro can take 20 seconds to complete. |
| Xiaomi Buds 3/4 Pro, Buds 3T Pro | THREE TICKS TOuch the touch panel on the right earpiece for 2 seconds. | After resetting, the headphones will automatically go into pairing mode. |
| Xiaomi FlipBuds Pro | Press the button on the case for 10 seconds until the indicator starts flashing orange. | Resetting through the case only works with a connected charging cable. |
| Redmi AirDots (all models) | Hold the sensor on the left earphone for 15 seconds until the sound of the beep. | Redmi Buds 3 Lite may need to repeat the action twice. |
If your model is not specified, try the universal method:
- Place both headphones in the case and close the lid.
- Connect the case to the charger (even if it is charged).
- Open the lid and press the touch panels on both headphones simultaneously for 20-30 seconds.
- Wait until the indicators start flashing red and white alternately.
💡
If the headphones don’t respond to touch, try cleaning the touch panels with an alcohol tampon – sometimes contamination blocks the response.
What to do if the reset does not work?
In some cases, the headphones may not be reset the first time.
- 📱 Use the Xiaomi Wear app – in some models, reset is available through the settings menu (Section Reset or Recovery»).
If none of the methods worked, and headphones are guaranteed, contact the Xiaomi service center. 90% of the time the problem is solved by flashing through specialized equipment.
⚠️ Warning: Don't try to disassemble the headphones yourself, this will void the warranty. Inside, glue joints are used, and once disassembled, it will be impossible to restore the leakage.
What to do if one earpiece is not turned on?
How to connect headphones after resetting?
After a successful reset, the headphones will go into pairing mode to connect them to the phone:
- Open Bluetooth settings on your smartphone.
Xiaomi Android smartphones may be notified of the possibility of installing additional features (such as control gestures).
If the headphones do not appear in the list of devices:
- 🔄 Reboot Bluetooth on your phone (turn off and turn on again).
- 📱 Make sure your phone has visibility on for Bluetooth devices.
- 🔋 Check that the headphones are charged and are in pairing mode (blinking white indicator).
💡
Once reset, the headphones lose all previous settings, including the link to the Xiaomi account (if any), and they will have to be reconfigured through the Mi Home or Xiaomi Wear app.
Frequent Resetting Mistakes and How to Avoid Them
Many users make the same mistakes that make the reset incorrectly, and here are the most common:
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Low charge discharge | Headphones can turn off in the process, which will lead to a firmware failure. | Charge the case and headphones to at least 50%. |
| Use of non-original cable | Unstable nutrition can interrupt the resetting process. | Use the original cable or a certified USB-Type-C. |
| Interruption of procedure | The headphones may stop responding to commands. | Do not release the buttons/sensors until the indicator starts flashing in the correct sequence. |
| Resetting via an application on an informal firmware | It can cause loss of functionality (e.g., microphone shutdown). | Use only official software from Xiaomi. |
Another common mistake is trying to reset headphones that are already in firmware update mode.
- Wait for the update to complete (usually takes 3-5 minutes).
- If the process is frozen, place the headphones in the case, close the lid and wait 10 minutes.
- Repeat the reset attempt.
When Resetting Doesn't Help: Signs of Hardware Problems
If you have problems after the reset, it may be a physical malfunction.
- 🔊 Lack of sound in one headphone with a serviceable charge indicator - most likely, the speaker or audio track is damaged.
- 🔋 Headphones do not charge despite the fact that the case shows charge - a problem with contacts or battery.
- 📶 Permanent communication breaks less than 1 meter from the phone – malfunction of the Bluetooth module.
- 💧 Condensation inside the housing after moisture enters - oxidation of boards.
In these cases, the reset is useless. Contact the service center, especially if the headphones are guaranteed.
- Replacement of the speaker - 800-1500 ₽.
- Battery replacement: 1000–2000 ₽.
- Repair of Bluetooth module – 1500-2500 ₽.
⚠️ Warning: If the headphones have been in water, don't turn them on right away. Place them in rice or silica gel for 48 hours, then try charging. Turning on wet headphones almost always leads to a short circuit.