Xiaomi Earbuds Basic 2 wireless headphones (often called Redmi Airdots) are well-deservedly popular for their affordable price and decent sound quality. However, like any electronics, they can encounter software errors, pairing problems or freezes. In such situations, the only sure solution is to force the reset to factory settings, a procedure that completely clears the internal memory of the headset, removing old Bluetooth profiles and eliminating software conflicts.
Many users mistakenly believe that to reboot you need to disassemble the device or look for hidden buttons, but in fact the process is as simplified as possible by Xiaomi engineers. All actions are performed through touch panels on headphone cases and do not require connection to a smartphone or computer. The main thing is to clearly observe the sequence of actions and time intervals, since touch control is sensitive to the duration of pressing.
In this article, we will take a detailed look at the algorithm for actions for different scenarios, from a standard reset to solving problems when one of the headphones is not working. You will learn how to properly prepare the device, what indicators signal the success of the operation and what to do if the standard method did not help. Recovery of a gadget often takes less than a minute, if you know the right combination of actions.
Preparation of headphones for the reset procedure
Before you start taking action, you need to make sure that the devices are ready to reboot. Xiaomi Earbuds Basic 2 are complex electronic components, and their stable operation depends on the level of battery charge. If the battery is completely discharged, the touch panels may not respond to touch, or the reset process will be interrupted halfway, which will lead to malfunctioning of the Bluetooth module.
Place both earbuds in the charge case and make sure the lights are lit red to signal the start of charging. Wait at least 15 to 20 minutes, even if the indicators show full charge to level the voltage in the batteries. This is a critical step, since unstable power can cause false alarms of sensors during the execution of reset commands.
⚠️ Warning: Do not try to reset if the headphones are in your ears or connected to your phone.
It is also recommended to pre-remove the device from the list of conjugated gadgets on your smartphone. Go to the Bluetooth settings of the phone, find Redmi Airdots or Mi True Wireless EBs Basic 2 and select the option "Forget the device" or "Disable" This will prevent automatic reconnection during the memory cleanup process, which may interfere with the correct execution of commands.
☑️ Preparation for discharge
Standard Reset Method Through Touch Panels
The main way to get the Xiaomi Earbuds Basic 2 back to factory status involves using touch zones on the headphone cases. This method works in 95% of software failures. You'll need to remove both headphones from the charging case at the same time. Make sure they're not connected to the phone and their indicators slowly flash white, waiting for pairing.
Press and hold the touchpads on both headphones simultaneously. It takes about 20 seconds to hold your fingers. In the first 5-7 seconds, the headphones can emit audible signals or voice notifications about the connection — ignore them and keep holding them. The critical moment comes when the indicators start flashing red several times in a row, which means that the memory clearing command is received by the device's processor.
Once the red flashing appears, release the panels. The headphones will automatically turn off. Now place them back in the charging case for 10 seconds, then retract them again. They should go into pairing mode (fast flashing white), and you can find them on the Bluetooth list on the phone as a new device. The full reset cycle is considered complete only after re-energizing and appearing in Bluetooth search.
What if the indicators don’t flash red?
Solving the problem of headphones desynchronization
A common problem for Redmi Airdots owners is desynchronization when only one headphone is running, or they are defined by the phone as two different devices. In this case, a standard reset may not work the first time, and a deeper cleaning of the communication configuration between the left and right modules is required.
Then put both earbuds in the case and close the lid. In 10 seconds, pull them out and quickly tap the touchpads 5 times in a row on each earbud. If you hear a characteristic click or voice message, then the deep reset mode is activated. Then put them back in the case, close them and wait 30 seconds. When they are removed, they must find each other themselves before connecting to the phone.
- 🔊 If only one indicator is burning - the problem is in the contacts of the case, wipe them with alcohol.
- 📱 If the phone sees two devices, "Mi True Wireless EBs Basic 2 L" and "R", the reset failed, repeat the procedure.
- ⚡ If the headphones discharge quickly after resetting, it may be necessary to calibrate the battery with a full discharge cycle.
It's important to understand that the synchronization process between the left and right earphones is automatic after reset. Don't try to connect them to the phone immediately after extraction from the case. Give them 5-10 seconds in standby mode so that they communicate with each other via TWS (True Wireless Stereo) protocol. Only after one indicator (usually the right one) starts blinking, you can start searching on your smartphone.
💡
Before re-pairing, turn off Bluetooth on all nearby devices (tablets, laptops) that were previously connected to these headphones.
Diagnostics of indicators and their significance
Understanding color is key to successfully managing Xiaomi Earbuds Basic 2. LEDs not only report charge, but also the current status of operations. During reset, the behavior of indicators is a major reference point for the user. Misinterpreting signals can lead to you interrupting the process too early or, conversely, to perform unnecessary actions.
The table below shows the main states of the indicators you will encounter when you restore settings. Pay attention to the combination of colors and blinking frequency, as they have a strictly defined value in the logic of the microcontroller headphones.
| Status of the indicator | Colour | Meaning |
|---|---|---|
| Slow blinking | White | Preparation mode (Pairing Mode) |
| Fast flashing (2 times) | White | Successful connection to the device |
| Multiple flashings | Red. | Resetting setup completed / Low charge |
| Constant glow | Red. | Charging is in progress. |
| Lack of glow | - | Headphone off or discharged |
If the indicator behaves chaoticly after the reset procedure (for example, flashes blue and red alternately, which is not typical for this model in normal mode), this may indicate a hardware malfunction or a critical firmware error. In normal operation, Xiaomi uses only white and red to indicate statuses. Other shades or strange patterns require contacting the service center.
Removing common errors after resetting
Sometimes, even after successfully completing all the steps of Hard Reset, the headphones may not earn the expected way.This may be due to the Bluetooth cache on the smartphone side or residual configuration files on the Android or iOS operating system. If the Xiaomi Earbuds Basic 2 does not connect, try clearing the Bluetooth cache in the phone's settings.
To do this, go to Settings → Apps → Show system → Bluetooth → Memory → Clear cache. After that, reboot the smartphone itself. This action deletes any temporary files that could block the new pairing. On iPhone, it is easy to reboot the device, since iOS independently manages Bluetooth services more aggressively.
⚠️ Attention: Cleaning up the Bluetooth cache will remove the pairing history with all devices.You will have to reconnect the watch, fitness bracelets and car stereo.
Another common mistake is to try to plug in just one earpiece. Once reset, both earbuds must be activated together. If you plug in just the right one and leave the left one in the case, they don't sync. Remove both, wait for them to "find" each other (the indicator of one of them stops blinking or changes the rhythm), and then plug in to the phone.
Technical features and specifications of the model
Xiaomi Earbuds Basic 2 is based on the Realtek chipset, which is known for its energy efficiency, but is sensitive to static electricity and sudden voltage drops. That is why the procedure for resetting through touch panels is designed with controller protection in mind. Software reset does not affect the physical parameters of the speakers, but completely rewrites the pairing table in non-volatile memory.
Importantly, these headphones don’t have a separate application for deep equalizer tuning or button reassignment at the official level (unlike older Mi True Wireless models).So resetting backs them to the basic A2DP and HFP profile, which is universal for all audio sources. This guarantees compatibility but limits customization options.
- 🎧 Bluetooth version: 5.0 (provides stable signal up to 10 meters).
- 🔋 Audio codec: SBC (Standard codec, does not support AptX).
- 💧 Protection: IPX4 (protection against splashes, but not from immersion in water).
Understanding these limitations helps avoid false expectations: If the sound is “as it used to be” or “basic” after the reset, it is normal because the possible software distortions or codec conflicts that have arisen during previous connections to different devices have been removed.
💡
Resetting does not improve the physical sound quality, but eliminates software distortion and delays, returning the device to factory operating standards.