The Xiaomi Redmi Note 7, which was released a few years ago, remains a popular device due to its balance of price and performance. However, over time, the standard functionality of MIUI begins to be lacking for advanced users who want to gain full control of the system, at which point the question arises about the need for Root rights that open access to system files and hidden Android settings.
Rooting is not just an application installation, but a complex technical process that requires accuracy and risk understanding. You will interact with the bootloader and system partitions, so any errors can lead to the failure of the device. In this article, we will discuss in detail how to safely root Redmi Note 7 using modern methods and current tools.
Before you start to act, you have to realize that you are taking responsibility for the state of your gadget. The official warranty from the manufacturer when you interfere with the software part, as a rule, is canceled. However, the ability to remove system debris, modify the kernel and install specialized modules is worth it for many enthusiasts.
Risk analysis and device preparation
The first step to getting superuser rights is careful preparation, and unlocking Bootloader is a prerequisite, without which installing a custom recavator or a modified bootloader is impossible, and it should be noted that after this procedure, all data on the internal drive will be irretrievably deleted.
You need to back up all your important data in advance, including photos, contacts, messaging, and documents. Using cloud services or copying files to your computer is the only way to protect yourself from loss of information. Also make sure that your battery is at least 60-70% so that your device doesn't turn off at a critical time.
⚠️ Note: Once the bootloader is unlocked, some high-security banking applications and services (Google Pay, Samsung Pay and similar) may stop working normally.
Be sure to link your Mi Account to your device in advance, preferably a few days before the procedure begins. Xiaomi’s security system requires you to wait a certain period (usually 7 to 168 hours) after the binding before allowing unlocking, which is given to the user to think about and protect against theft of the device.
It is also important to download and install the current ADB and Fastboot drivers on your computer. Without properly working drivers, your computer simply won’t see your smartphone in bootloader mode. For Redmi Note 7 (codename lavender), this is especially critical, as older versions of drivers may not correctly identify the device.
Required tools and software
To do this successfully, you'll need a suite of specialized software, the Mi Unlock Tool, which is officially used to unblock the bootloader, which you can download exclusively from MIUI's official website to avoid malicious code.
The second key component is a modified recovery, most commonly TWRP (Team Win Recovery Project). There are different versions for the lavender model, so it is important to choose one that is compatible with your Android version and the firmware type (Global, China, EU).
Where do I look for firmware files?
You'll also need a root-rights archive, which is currently the de facto standard Magisk (or its forks, such as Magisk Delta), which allows you to obtain superuser rights in a system-safe way by modifying the boot image rather than replacing system files directly.
Don’t forget to prepare a quality USB-Cheap cables are often only for charging and do not provide stable data transfer, which can interrupt the firmware process at the most inopportune time.
The procedure for unlocking the bootloader (Bootloader)
The most important step is unlocking. First activate the developer mode on your smartphone. To do this, go to Settings → About phone and quickly press 7 times on the MIUI version until the activation notification appears.
Then, in the Additional → For developers menu, look for Mi Unlock Status and click on Add Account and Device. Make sure your smartphone is connected to the Internet via Wi-Fi or mobile network. Once successfully linked, you will see a message telling you how long you have to wait.
When the wait period expires, turn off the phone and enter Fastboot mode, holding the Volume Down and Power buttons simultaneously. Connect the device to your PC and launch the Mi Unlock Tool. The program will check the status and, if all conditions are met, prompt you to unlock the device.
It takes a few minutes, and then the phone automatically restarts and clears all the data, which is normal security behavior, and once turned on, you'll have to reset your initial Android setup.
Installation of TWRP and obtaining Root rights
Now that the bootloader is unlocked, you can move to custom recavator installation. Copy the twrp-lavender.img image file and the Magisk archive into your smartphone memory. Go to Fastboot mode again and connect the phone to your computer.
Open the command line on the PC in the folder with ADB tools and enter the command to firmware recovery:
fastboot flash recovery twrp-lavender.imgAn important nuance for Redmi Note 7 is that you can't boot right into the system after you've run the firmware. You need to immediately press the combination of Volume Up and Power to get into the installed TWRP. If you boot into a regular MIUI, the stock recap will overwrite the TWRP, and you'll have to repeat the procedure.
☑️ Checklist before firmware
When you're in the TWRP menu, select Install, search for an archive from Magisk, and confirm the swipe installation. Once you've finished, press Reboot System. When you first boot, the system can take longer than usual to boot, which is normal because it optimizes applications.
Once you download, you'll see the new Magisk app on the menu. Open it, and if it offers additional customization or reboot, you'll agree. The green icon and version in the app are a sign of successful Root rights.
Comparison of rooting methods
There are several approaches to system modification, and it is important to understand their differences. The table below provides a comparison of the main methods available for the Xiaomi Redmi Note 7.
| Method | Difficulty | Security | Functional |
|---|---|---|---|
| KingRoot / OneClick | Low. | Low. | Basic |
| Magisk (Systemless) | Medium | Tall. | Complete. |
| SuperSU (Legacy) | Medium | Medium | Complete. |
| KernelSU | Tall. | Very high. | Advanced. |
Magisk is the preferred method by far, and works without changing the system partition to hide root rights from banking applications. Old methods like SuperSU are considered outdated and may not work properly on new versions of Android.
The use of single-click routers (KingRoot and analogues) is highly discouraged, often containing ads, transmitting user data and can install undeleteable system debris. For the Redmi Note 7, such methods can lead to unstable operation of the communication module.
Magisk configuration and modules
Once you successfully set the superuser rights, you get new opportunities. In Magisk settings, be sure to turn on Zygisk if you plan to use modules that hide the root, which is critical to bypassing detection in applications.
You can add add a variety of extras to the module menu, from changing the system sounds to full-fledged performance tweaks, but don’t install too many modules at once, as this can lead to conflicts and reduce the stability of the Redmi Note 7.
💡
If the phone stopped booting after installing the module, press Volume Up + Power to get into TWRP, and delete the module folder through the file manager or use the adb remove command.
You also need to set up a Denilist, and add banking apps, Google Pay, and anti-cheat games, and let them work, thinking that the device has no administrator rights.
Possible problems and ways to solve them
There may be errors in the process of modification, and one of the most common is Bootloop. If you do, don't panic. Go inside. TWRP And try to make a Wipe cache (Wipe) Cache/Dalvik). If it doesn’t help, restore the backup or reflash the stock image.
⚠️ Warning: Never delete system applications through a Root Explorer unless you know exactly what they are responsible for.
Another problem is a broken fingerprint scanner or camera after you have installed a custom recavator, so make sure that the TWRP version is fully consistent with your MIUI firmware version. Often the solution is to update the recavator to the last available build.
If your computer stops seeing your phone in Fastboot mode, try replacing it. USB-cable or switch the device to another USB-port, preferably USB 2.0. Sometimes it helps to reinstall drivers through Windows Device Manager with manual selection from the list.
💡
The key to success is the exact matching of the versions of the recovery, firmware and Magisk. Chaotic installation of components from different authors is the main cause of errors.