How to reset Xiaomi Redmi 6A to factory settings: 3 proven ways

Resetting the Xiaomi Redmi 6A to factory settings is a radical but sometimes necessary step to solve system problems. This budget smartphone, released in 2018, is still popular due to its reliability and simplicity. However, over time, any gadget begins to slow down: temporary files accumulate, applications conflict, and viruses or failed updates can make the phone almost unusable.

Redmi 6A

Mi Account

three-way

Fastboot

If your Redmi 6A is stuck on the logo, doesn't respond to touch, or gives you an error "Unfortunately, System UI has stopped," reset is often the only solution. But remember, it's not a panacea for hardware problems (like a broken screen or a faulty battery), which requires repairs, not software reboots.

1.Resetting preparation: what to do necessarily

Before you start resetting, follow 4 key steps to avoid losing important data and avoiding problems during the procedure:

• 📱 Sync your contacts and calendar with your Google or Mi Account account. → Accounts. → Google and enable synchronization.
• 📁 Copy photos and videos to a computer or cloud (Google Photos, Yandex.Disk). USB-cable or wireless transmission via Mi Drop.
• 🔐 Remember the username and password from Mi Account. After reset, the phone may require you to enter this data to unlock (Mi Cloud Lock function).
• 🔋 Charge the phone to at least 50%. interruption of the process due to battery discharge can lead to "bricking" of the device.

Pay special attention to the associated Mi Account. If you forget the password, restore it in advance on account.xiaomi.com. Otherwise, after the reset, the phone may lock up with the requirement to enter the information of the account that was previously associated.

⚠️ Note: If you are buying a Redmi 6A With hands and not untied old Mi Account of the previous owner, after resetting the phone may be locked.In this case, you will need to contact Xiaomi support with proof of purchase.

Also check if the device protection feature (in some firmware) is enabled on the phone. PIN-The code or pattern lock after the reset. → Lockdown and protection → Device protection.

2. Method 1: Reset via the settings menu (the easiest)

This method is suitable if the phone turns on and responds to touch. The interface may vary slightly depending on the version of MIUI, but the overall scheme remains the same.

Step instructions:

The phone will automatically reboot and start setting up as new. If the "No command" error appears after the reset or the phone hangs on the Redmi logo, move on to the next method.

Synchronized contacts and calendar|Photos and videos copied|Battery charge ≥50%|I remember the username/password from Mi Account.-->

3. Method 2: Reset via Recovery Mode (if the phone is not turned on)

If the Redmi 6A doesn’t respond to the power button, freezes on the screensaver or reboots cyclically, use Recovery Mode, which works even when the firmware is damaged, but requires precise execution of instructions.

How to log in to Recovery Mode:

1. Turn off the phone (press the power button for 10-15 seconds if it doesn’t respond).
2. Press the Power button and the Volume Up button (+) at the same time.
3. Hold them for 10-15 seconds until the Mi logo and Recovery menu appear.

In the Recovery menu, use the volume buttons for navigation and the power button to confirm the selection.

1. Select Wipe Data (or Wipe & Reset in some versions).
2. Confirm the action by selecting Wipe All Data.
3. After cleaning, go back to the main menu and select Reboot → Reboot to System.

⚠️ Attention: Recovery Redmi menu 6A If you see characters, look at the location of the points: Wipe Data is usually second on top, Reboot is the last.

If the phone freezes on the logo again after reset, the firmware may be damaged, in which case you will need to reflash the device via Fastboot (method 3).

Method 3: Reset via Fastboot (for power users)

This method is used if the first two methods did not work or you need to completely reinstall the firmware.

Step-by-step:

1. Download the official firmware for Redmi 6A (codename cactus) from MIUI Downloads. Choose the Fastboot version (file with.tgz extension).
2. Unpack the archive in a folder on your computer.
3. Install Xiaomi drivers (you can download via Mi PC Suite).
4. Turn off the phone and put it in Fastboot mode: Press the buttons Power + Volume – until the screensaver with a rabbit in the hat appears.
5. Connect your phone to your computer via USB.
6. Open the Mi Flash Tool, select the folder with the unpacked firmware and press Refresh.
7. At the bottom of the program, select Clean All (complete clean) and click Flash.

It takes 5-10 minutes. When it's done, it automatically restarts. If the Mi Flash Tool is a bug, try:

• 🔌 Use the other USB-port (preferably) USB 2.0).
• 🔄 Reinstall drivers manually through Device Manager.
• 📥 Download the firmware again (possibly the archive is damaged).

💡

If the Mi Flash Tool can't see the phone, try running it on behalf of the administrator or temporarily disabling the antivirus.

5. Common Mistakes and How to Avoid Them

Even when following instructions, users often encounter problems, and let’s look at the 5 most common mistakes and ways to solve them:

If the phone doesn't turn on at all after the reset (black screen, no button response), there may have been a critical error in writing the firmware, in which case only flashing through EDL Mode (emergency mode) will help, but this will require special cable and experience with Qualcomm devices.

💡

If the phone after reset requires a password from Mi Account that you do not know, DO NOT try to enter random combinations. After 5 unsuccessful attempts, the device will lock for 72 hours.

6.Restore phone after reset

After the successful reset of the Redmi 6A, the initial setup is to be made.

• 🔑 Sign in to Mi Account and Google Account to recover contacts, apps and settings.
• 📲 Update your firmware to the latest version through Settings → The phone. → Updating the system.

If your phone is running slower than before, check:

• Is the internal memory filled (free up space through Settings → Storage)?

To speed up the work of Redmi 6A After reset, you can disable unnecessary system applications (for example, Mi Video or Mi Music), but do this carefully so as not to disturb the stability of the system. ADB AppControl (Developer Rights Required).

7. Alternatives to resetting: when can you do without it

Factory reset is a last resort, and in some cases, the problem is solved by less radical methods:

• 🐢 Brake the interface → Clear the cache in Settings → Warehouse → Cache data.
• 🔄 Apps fly out → Update them via Google Play or reinstall them.
• 📵 Bad net catches → Reset network settings in Settings → SIM-maps and mobile networks → Resetting network settings.
• 🔋 The battery goes down fast. → Check the background processes in Settings → Battery.

If the problem is virus-related, try scanning your phone through Mi Security or Malwarebytes. SD Maid (root rights required) is a good tool to clean up your system.

If the phone is not turning on due to battery discharge, keep it charging for at least 30 minutes before trying to reset. Sometimes charging from another power supply (for example, with an output of 2A instead of the standard 1A) helps.

FAQ: Frequent questions about resetting Xiaomi Redmi 6A