Reset Xiaomi settings via reboot: step-by-step instructions for all devices

Resetting through reboot (reboot) is one of the most effective ways to return the Xiaomi device to factory settings without using a computer.This method works on smartphones with MIUI, Mi TVs and Mi Box consoles, but has its own nuances depending on the model and version of the firmware. Unlike the standard reset via the settings menu, the reboot method often helps in situations where the device is getting stuck, unresponsive to commands or locked with a password.

Many users confuse a conventional reset with a hard reset that erases all data. In fact, a reset can be both soft (file saving) and hard (complete cleaning). In this article, we will discuss both options, and also how to avoid the typical errors that lead to a device blink (complete failure).

If your Xiaomi device is slowing down, spontaneously restarting or issuing errors when updating, resetting through the rebuke can be a salvation. The main thing is to choose the right method and follow the instructions so as not to lose important data. Next, we will discuss in detail all the available methods for different types of equipment.

How is a reset different from a normal reset?

The main difference is the trigger mechanism: a normal reset is initiated through the settings menu, whereas a rebut method is activated by a combination of buttons or commands in recovery mode, which allows you to bypass the locking of the interface when the device does not respond to the sensor or remote.

Key advantages of resetting through rebuke:

• 🔄 It works even on locked devices (unless Mi Account protection is activated)
• 🛠️ Can restore performance after a failed firmware update
• 📱 Suitable for smartphones, TVs and consoles Xiaomi
• ⚡ Often solves problems with the "eternal" Mi logo when downloading

There are downsides, however, for example, on some Redmi Note 12 and later resets, a Mi Account password may be required if the account link was previously activated.

⚠️ Note: On devices with encrypted storage (for example, Xiaomi 13 Pro) after a hard reset may require the entry of the old password to decrypt data.

Preparation of the device for discharge through the receptacle

Before you start the procedure, follow a few mandatory steps that will help you avoid losing important data and make it easier to recover from the reset.

📌 Checklist of preparations:

Pay special attention to backup. On Xiaomi smartphones, you can do this through Settings → About Phone → Backup. For Mi TVs, Settings → Account and Security → Mi Cloud. If the device does not respond to commands, try connecting it to your computer and copy files manually.

On models with the bootloader unlocked (for example, after firmware is flashed via Fastboot), the reset may result in a re-lock, in which case you will need to re-unblock through the official Mi Unlock Tool.

💡

If you reset the Xiaomi Mi TV Q2 2023, disable the Auto Update function in the settings before the procedure, which will prevent the problem firmware from being automatically installed immediately after the reset.

Reset via Receptacle on Xiaomi smartphones (MIUI)

For Xiaomi, Redmi and POCO smartphones, there are two main ways to reset via reboot: through Recovery Mode and through hard reboot. The first method is more secure and allows you to choose the type of reset, the second is forced and used when the device is completely inoperable.

📱 Method 1: Recovery Mode (Recommended)

1. Turn off the smartphone with a long press of the power button.
2. Press the combination of Loudness up + Power and hold for 10-15 seconds until the Mi logo appears.
3. From the Recovery menu, select the language (usually English by default).
4. Go to Wipe Data → Wipe All Data (full reset) or Wipe Cache (cache cleanup).
5. Confirm the action and wait for the process to be completed.

🔧 Method 2: Hard reboot (for hanging devices)

If the smartphone does not respond to buttons or is stuck on the logo:

1. Press Volume Down + Power for 20-30 seconds.
2. If the device vibrates but does not reboot, release the buttons and try again.
3. After a forced reboot, try logging into Recovery Mode as in Method 1.

Newer models (Xiaomi 14, Redmi Note 13 Pro+) may require additional confirmation via Mi Account, even if the device was not previously tied, due to enhanced anti-theft protection.

Reset settings on Xiaomi Mi TVs

Xiaomi TVs on Android TV or Google TV also support reset via relay, but the algorithm is different from smartphones. The main difficulty is the lack of physical buttons (except the power button), so it uses combinations with the remote or connecting the keyboard over USB.

📺 Method 1: Through the service menu (for Mi) TV 4S/5X/Q2)

1. Turn off the TV with a button on the remote.
2. Press the Menu + Loudness down and, holding them, press the power button on the TV.
3. Hold the combination for 10-15 seconds until the Recovery menu appears.
4. Select Wipe Data/Factory Reset using volume buttons and confirm the selection.

🖥️ Method 2: With the help of USB-Keyboards (for new models)

If the remote is not working:

1. Connect. USB-keyboard.
2. Press Ctrl + Alt + F2 to log in to the service menu (not working on all models).
3. Enter the reboot recovery command to reboot to Restore Mode.

⚠️ Note: On Xiaomi TVs with Android version TV 12 or later, after resetting, you may need to reset your Google account. If you forget the login details, the TV will remain locked.

Resetting the Mi Box and Mi Stick consoles through the reboot

Mi Box S, Mi Box 4K and Mi TV Stick also support reset via reboot, but there are some nuances here: the main problem is the lack of physical buttons (except the reset button on the body), so you often have to use the "blind" method.

🎮 Method 1: Reset button on the body

1. Find a small hole on the console with the inscription Reset.
2. Insert a paper clip or toothpick into it and hold for 10-15 seconds.
3. The console will reboot and start the reset process (the indicator will flash orange).

🔄 Method 2: Through ADB-Teams (for advanced users)

If the Reset button does not work:

1. Connect the console to the computer via USB.
2. Enable debugging over USB in the settings (Settings → About console → Assembly number – press 7 times).
3. Run the command at the terminal: adb shell am start -n com.android.tv.settings/.deviceinfo.ResetFragment

On the 2023 Mi TV Stick, the Reset button is often hidden under a sticker. To reach it, carefully attach the sticker with a plastic card - it is not glued much and will not damage the body.

💡

On the Mi Box, resetting through the relay does not remove firmware updates. If the problem was caused by a “curve” update, you will have to sew the device manually through the Amlogic USB Burning Tool.

Frequent Mistakes and How to Avoid Them

Even experienced users sometimes make reset errors that lead to device blinks or data loss, and here are the most common ones and ways to prevent them:

• 🔋 Battery discharge: On smartphones with a charge below 30%, the reset may be interrupted.Always charge the device before the procedure.
• 🔌 Interrupting process: Don't take out the power cable or press buttons during reset. on TVs this can lead to a cycle of reboots.
• 🔒 Forgotten Mi Account: Account-linked devices will require login/password input after reset. If you forget them, restore access in advance.
• 📱 Incompatible firmware: On custom firmware (e.g. Xiaomi.eu), a reset through the receptacle may result in a download to Fastboot.

Another common mistake is to try to reset on devices with an unlocked bootloader, but without a customized Recovery (TWRP) installed, in which case the device may not boot after the reset.

fastboot flash recovery recovery.img


fastboot reboot recovery

Xiaomi TVs sometimes have a "No command" error after logging into Recovery, which means the recovery menu is damaged. USB-Port with the official Mi software TV Assistant.

What if the resetting over the rebate did not help?

If there are problems after reset (the device does not turn on, hovers on the logo or gives errors), try the following steps:

🛠️ Algorithm of action:

1. Check charging: Connect the device to the original RAM for 30 to 60 minutes, even if the indicator is not on.
2. Try another reset method: For example, if Recovery didn’t work, try Fastboot (for smartphones).
3. For smartphones: Mi Flash Tool. for TVs: Mi TV Assistant. For consoles: Amlogic USB Burning Tool.

Contact the service.

On Xiaomi smartphones with a Qualcomm chipset (for example, Redmi Note 11 Pro+), you can try to enter EDL (Emergency Download Mode) for firmware:

1. Turn off the phone.
2. Hold the Loud up. + Loudness down + Power and plug in. USB-computer-wire.
3. If the drivers are installed correctly, the device will be identified as Qualcomm HS-USB QDLoader 9008.

For Xiaomi TVs with the error "Bootloop" (cyclic reboot) will only help flashing through USB-Download firmware on the support site Xiaomi (choose a version strictly for your model!).

FAQ: Answers to Frequent Questions