How to reset the headphone settings Xiaomi Redmi: 3 proven ways

Xiaomi Redmi headphones are a popular solution for fans of high-quality sound at an affordable price, but even the most reliable equipment sometimes requires a reboot: the device can start to glitch, not connect to the phone or play back distorted sound, in which case resetting the settings to the factory helps to return to work without going to the service center.

In this article, we will discuss all the current reset methods for Redmi Buds 3/4/5 Pro, Redmi AirDots and other lines. You will learn how to perform the procedure through the Mi Home mobile application, physical buttons on the headphone case, and what to do if the device does not respond to standard methods.

When do I need to reset the Xiaomi Redmi headphones?

Factory reset is a last resort when other methods of problem solving have not worked, and these are typical situations where the procedure is justified:

• 🔌 Headphones do not connect to your phone or computer despite Bluetooth enabled.
• 🔊 The sound is interrupted, wheezing or noise appears, although the audio source is working properly.
• 🔄 One of the headphones (usually the right one) does not sync with the left one after being removed from the case.
• 📱 Mi Home app doesn't see headphones or shows "Device doesn't respond" error".
• 🔋 Battery discharges too quickly, although previously held the charge longer.

It is important to understand that the reset removes all user settings: the binding to the Xiaomi account, connection history and customized sound parameters (for example, the equalizer). If the problem is related to a physical breakdown (damaged speaker, departed contact), the software reset will not help - you will need repairs.

⚠️ Note: If Redmi headphones were connected to multiple devices (for example, a smartphone and a laptop), after reset, they will "forget" all passwords.

Method 1: Reset via Mi Home (official method)

The safest and most recommended way is to use the Mi Home app, which is suitable for all Redmi Buds/AirDots, Released models after 2020.

1. Install the Mi Home app from Google Play or the App Store.
2. Open Mi Home and log in to your Xiaomi account (if the headphones were tied to another account, you will need access to it).
3. Go to Devices → Headphones and select your Redmi model.
4. Slap the icon. ⚙️ Settings in upper right corner.
5. Scroll down and click Reset Settings (or Untie the device in older versions of the app).
6. Confirm the action in the pop-up window.

After reset, the headphones will automatically restart (the indicator blinks) and be ready for a new connection. If your model does not appear in the list of devices, check:

• 📶 Headphones are on and are located next to the smartphone (no further than 1 meter).
• 🔄 Bluetooth on your phone is activated and not in power saving mode.
• 📱 Mi Home has all the necessary permissions (access to location, Bluetooth, notifications).

Check the version of the app (update if necessary)

Make sure your headphones are at least 30% charged.

Disconnect headphones from other devices (laptop, tablet)

Close background applications that use Bluetooth-->

If the headphones don’t appear in the list of available devices to connect after reset, try manually pairing: place them in the case, then pull out and hold the button on the case (usually on the right earpiece) for 10 seconds until the indicator starts flashing red and white.

Method 2: Hardware reset via buttons (for all models)

When the Mi Home app is unavailable (for example, there is no smartphone at hand) or headphones are not determined by the system, a hardware reset will help.The method works for all Xiaomi Redmi models, but may vary slightly depending on the generation.

The overall scheme of action:

1. Place both headphones in a charged case and close the lid for 5 seconds.
2. Take the headphones out of the case (don't turn them on in advance!).
3. Press and hold the touch button (or physical key) on both headphones at the same time.
4. Keep the buttons clamped for 15-20 seconds until the indicators start flashing red and white (on some models, only white).
5. Release the buttons. The headphones will automatically turn off and reboot.

For specific models, there are nuances:

⚠️ Note: On models with active noise reduction (ANC) After reset, you may need to recalibrate the microphones. After connecting to the phone, go to the headphone settings in Mi Home and select Calibration. ANC.

If the indicators do not flash despite the button retention, check:

• 🔋 Headphone charge level (minimum 20% for resetting).
• 🧲 Magnetic interference (remove headphones away from metal objects).
• 🔄 Try to reset just one headphone (sometimes helps with desynchronization).

💡

If the touch buttons don’t respond, wipe them with an alcohol wipe – fat or dirt can block touch.

Method 3: Case Reset (for supported models)

Some Xiaomi Redmi models (such as the Buds 4 Pro or Buds 5A) support resetting directly through the charging case, a method that is convenient if the headphones are discharged or unresponsive to pressing.

Instructions:

1. Put both headphones in the case and close the lid.
2. Connect the case to the power source (charging or Power Bank).
3. Press and hold the button on the back of the case (usually next to the USB-C connector) for 10-12 seconds.
4. Release the button when the case indicator starts flashing red and green.
5. Get the headphones out of the case - they should automatically reboot.

On Redmi Buds 5A models, after such a reset, the case also resets the connection history, which can solve the problem with the “hang” of the Bluetooth connection.

If the case does not respond to the button retention:

• 🔌 Try another charger (sometimes low-current power supplies don't allow resetting).
• 🔋 Make sure that the case is at least 10% charged (the indicator should burn when connected to the network).
• 🔄 Reboot the case: connect to charging, hold the button for 30 seconds, then disconnect and try again.

What if the reset didn't help?

If problems persist after reset, check the following points:

1. Update your headphone firmware through Mi Home (Settings → Software Update) Older software often causes conflicts with newer versions of Android/iOS.
2. For example, Redmi Buds 4 Pro may not work properly with phones on Android 10 and below due to the limitations of Bluetooth 5.2.
3. Reset Bluetooth settings on your phone: Settings → System → Reset → Network (or Bluetooth) settings
4. Try connecting to another device (tablet, laptop) to rule out a smartphone problem.

If the headphones are still not working:

• 🔊 Check the speakers for physical damage (light a flashlight into the grille - there should be no ruptures of the membrane).
• 🔋 Battery Test: If Headphones Die in 10-15 Minutes, You May Need to Replace Your Battery.
• 📡 Eliminate interference: 2.4GHz Wi-Fi routers, microwaves or other Bluetooth devices can create conflicts.

⚠️ Note: Xiaomi Redmi headphones do not support simultaneous connection to two devices in dual audio mode (for example, to the phone and laptop).If you try to use this feature, one of the gadgets will periodically turn off.

💡

If the reset doesn't solve the problem, 80 percent of the time, it's physical damage (moisture, falling) or outdated firmware, and in these situations, software methods are powerless, requiring diagnostics in the service.

How to restore the connection after resetting?

After a successful reset, the Redmi headphones return to the factory settings and lose all the bindings.

1. Activate Bluetooth on your smartphone.
2. Get the headphones out of the case – they should automatically turn on and go into pairing mode (blinking white indicator).
3. In the list of available Bluetooth devices, select your model (the name will start with Redmi Buds... or Mi True Wireless...).
4. Confirm the connection. Some models will need to enter PIN-code (usually 0000 or 1234).
5. If the headphones do not appear in the list, press and hold the button on the right earphone for 5 seconds to force the search mode to be activated.

To restore additional functions (such as control gestures or ANC):

• 📱 Open Mi Home and re-attach your headphones to your account.
• 🔊 Set up the equalizer in the Sound section (presets for bass, vocals, etc. are available.).
• 👆 Check the purpose of gestures (e.g. double touch for playback/pause).

If after connecting the sound is only in one headphone, synchronize:

1. Put both earbuds in the case.
2. Remove them and hold the buttons on both headphones for 5 seconds.
3. Wait for the double beep, which means that the synchronization was successful.

Common Resetting Mistakes and How to Avoid Them

Many users make the same mistakes that make the reset fail or cause new problems.

• ❌ Interrupt the reset process (e.g., release buttons early) This can cause firmware damage.
• ❌ Reset your headphones when they’re connected to your phone (turn them off in Bluetooth settings first).
• ❌ Use non-original case chargers during reset – this can cause a failure.
• ❌ Try to reset headphones if they are less than 15% (risk of full discharge during the procedure).

Also avoid these actions after resetting:

• 🚫 Don’t connect your headphones to multiple devices at once in the first 10 minutes – give them time to stabilize the connection.
• 🚫 Do not update your firmware immediately after resetting – check the basic functionality first.
• 🚫 Do not drop the headphones and do not expose them to sudden temperature changes (for example, do not put on the battery heating).

If the headphones start to work worse after reset (for example, the sound quality has deteriorated), try:

• 🔊 Calibrate the speakers in the Mi Home settings.
• 📵 Disable function ANC (If it has been activated automatically).
• 🔄 Reconnect the headphones to the phone, previously removing them from the list of associated devices.

💡

If after resetting the headphones began to discharge quickly, reset the charge cycle counter: completely discharge them before turning off, then charge to 100% without interruptions.

FAQ: Frequent questions about resetting Xiaomi Redmi headphones