Resetting the Mi Account on the Xiaomi Redmi 4 Pro is a challenge that many users face after buying a used phone, a forgotten password or locking a device. Unlike the new models, the Redmi 4 Pro (released in 2016) has specific limitations: There is no official support for unlocking through Find Device, and some methods require special preparation. In this article, we will discuss all the current methods, from standard reset through settings to working with the Internet. EDL-Xiaomi’s official service and service.
It's important to understand that the procedure is different from the reset on modern smartphones. For example, on the Redmi 4 Pro, you can't use the method through the Mi Cloud Unlock Tool because of the outdated version of MIUI. We'll focus on the methods that work on this model with its technical features. If you are not sure about your skills, you should contact a service center to avoid "bricking" the device.
Why you might need to reset your Mi Account on Redmi 4 Pro
The main reasons why users are looking for ways to delete a linked Mi Account are:
- 🔒 Buying a used phone with a tied someone else’s account (the previous owner did not untie the device).
- 🔑 Forgotten password from Mi Account, while two-factor authentication is not configured.
- 📱 Blocking after reset (e.g. via Recovery) when the phone requires the entry of old account data.
- 🛡️ Suspicion of hacking – the account may be compromised and needs to be untied urgently.
- 🔄 Resale of the device – the new owner must get a clean phone.
On the Redmi 4 Pro (mido model), the reset is complicated by the fact that the device runs on the basis of the Qualcomm Snapdragon 435 with a closed bootloader. ADB Xiaomi has tightened its security policy: from 2021, unlocking through unofficial tools can lead to permanent lockdown. IMEI.
⚠️ Warning: If a phone has been stolen, resetting a Mi Account without the owner's consent is against the law.We do not recommend using methods to bypass locks on lost or stolen devices.
Method 1: Reset via settings (if the phone is unlocked)
The easiest method is to delete your account directly in your phone settings, which is suitable if:
- 📱 You have access to the Redmi 4 Pro desktop.
- 🔓 You remember the password from your Mi Account or it is not tied.
- 📶 The phone is connected to the Internet (Wi-Fi or mobile network).
Instructions:
- Open Settings → Accounts → Mi Account.
- Click on the gear icon (⚙️) top-right.
- Select Delete Account.
- Confirm the action with a password from the Mi Account or via SMS (if two-factor authentication is enabled).
- Reboot the phone.
If the phone requires re-authorization after deleting your account, perform a full reset via Settings → Additional → Restore and Reset → Reset. This will delete all data, but is guaranteed to untie the device from the old account.
Check access to your Mi Account (password/email)
Connect your phone to Wi-Fi
Make a backup copy of important data
Charge the battery by at least 50%
-->
Method 2: Reset via Fastboot (requires an unlocked bootloader)
If the phone is locked but you have access to Fastboot, you can try resetting your account via fastboot erase frp. However, on Redmi 4 Pro, this method only works when the bootloader is unlocked. If the bootloader is locked, you will need to officially unlock through the Mi Unlock Tool (the process takes up to 720 hours of waiting!).
Step-by-step:
- Turn off the phone and press Volume Down + Power to log into the Fastboot.
- Connect Redmi 4 Pro to your PC via USB.
- Download Platform Tools (for Windows) and unpack the archive.
- Open the command line in the folder with fastboot and execute: fastboot devices (should display the serial number of the device).
- Enter FRP (Factory Reset Protection) command: fastboot erase frp
- Reboot the phone: fastboot reboot
If the blockage remains after the restart, try to perform additionally:
fastboot erase persistent
fastboot erase config⚠️ Warning: On some Redmi 4 Pro firmware, fastboot erase frp command may lead to reset IMEI. Before performing, make sure you have a backup of the NV-data (can be done via QPST Mi Flash).
What if the fastboot can’t see the device?
Method 3: Resetting through EDL-The mode (for experienced users)
EDL (Emergency Download Mode) is an emergency boot mode that allows you to flash through a phone even with a locked bootloader. On the Redmi 4 Pro, you can log into EDL via:
- 🔌 Short circuit test points on the board (requires disassembly of the phone).
- 💻 Team. ADB (if debugging is on USB): adb reboot edl
- 🔄 Special cables (e.g. Deep Flash Cable for Qualcomm).
To reset your Mi Account through EDL, you will need:
- Install the Qualcomm HS-USB QDLoader 9008 driver (you can download it on XDA).
- Download the firmware for Redmi 4 Pro (model mido) in.tgz format from MIUI Download.
- Use the Mi Flash Tool to run the firmware in clean all mode (this is completely erased data, including the Mi Account).
| Tool. | Download link | Notes |
|---|---|---|
| Mi Flash Tool | Official website | Choose the version for Windows 7/10/11 |
| Impressions for Redmi 4 Pro (mido) | Xiaomi Firmware Updater | Download Global Stable or China Stable |
| QDLoader Driver | XDA Developers | Install manually through Device Manager |
| Deep Flash Cable | AliExpress | Look for cable for Qualcomm 9008 |
Important: Firmware through EDL will reset all data, including IMEI, if you do not back up the NV data. After firmware, you may need to restore the serial number through tools like QPST or SN Writer.
💡
Before you run through EDL, check the MIUI version on your phone. If you have custom firmware (like LineageOS), go back to stock MIUI first via Fastboot, or you risk getting a brick.
Method 4: Official Unlocking Through Xiaomi
If independent methods did not help or you are afraid to damage the phone, contact the official service center Xiaomi.
- 📄 Documents: You will need a purchase check or a warranty card (if the phone is for warranties.
- ⏳ Timeline: Unblocking takes 3 to 10 business days.
- 💰 Cost: On average from 1,500 to 3,000 rubles (depending on the region).
- 🔒 Restrictions: If the phone is blacklisted (stolen/lost), unlocking is not possible.
How to find the official service:
- Go to the Xiaomi Support website.
- Select the Service Centers section.
- Enter your city and find the nearest authorized center.
- Pre-register by phone to clarify the necessary documents.
The advantage of the official method is to ensure that the phone will not be blocked again, however, if the Redmi 4 Pro is purchased abroad (for example, on AliExpress), Russian services may be denied service.
Yes, via settings | Yes, via Fastboot | Yes, via EDL | No, I'm afraid to damage my phone | Contacted the service-->
Frequent Mistakes and How to Avoid Them
When you reset your Mi Account on Redmi 4 Pro, users often face typical problems:
| Mistake. | Reason. | Decision |
|---|---|---|
| Fastboot: unknown command 'erase frp' | Older version of fastboot or blocked bootloader | Update Platform Tools or unlock the bootloader via Mi Unlock |
| The phone is not included in the EDL after the points are closed. | Incorrect closure or absence of the QDLoader driver | Check the circuit circuit for Redmi 4 Pro or use Deep Flash Cable |
| After the firmware no network (IMEI invalid) | Damaged NV-data when reset via EDL | Restore the IMEI via QPST or SN Writer (backup required) |
| Mi Flash Tool is a critical partition error | Incompatible firmware version or corrupted files | Download the firmware again and select Clean All and Lock mode |
The most common mistake is trying to reset your account through Recovery (clutching Volume Up + Power). On Redmi 4 Pro, this will not delete your Mi Account, but only erase your user data. After such a reset, the phone will still require you to enter your login and password from your old account.
💡
If you are not sure about your actions, never use the commands fastboot oem unlock or fastboot flashing unlock on a locked bootloader, which will lead to a complete lock of the phone without the possibility of recovery without official service.