How to Reset Xiaomi Redmi 5 Plus to Factory Settings: The Complete Guide

Why a factory reset may be necessary

Resetting the Xiaomi Redmi 5 Plus to factory settings is a radical but sometimes necessary solution, which removes all user data, apps and settings, returning the smartphone to the β€œout of the box” state.

First, if the device starts to slow down or spontaneously reboot. Over time, cache accumulation, memory fragmentation and application conflicts can lead to critical failures. Second, resetting is relevant before selling or transferring the phone to another user - this ensures that your personal data (photos, messages, passwords) does not fall into the wrong hands. Third, the procedure helps eliminate the consequences of failed firmware or rooting when the system is unstable.

It's important to understand that the MIUI-based Redmi 5 Plus has two types of resets: soft (via settings) and hard (via Recovery or Fastboot). The first retains the firmware version, the second may be needed in case of serious crashes when the phone does not load. Next, we will analyze all the methods in detail, taking into account the nuances of this model.

πŸ“Š Why do you want to reset the Redmi 5 Plus?
Remove the lags and brakes
Prepare for sale
Correct errors after firmware
Another option

Preparation for resetting: what to do in advance

Before you start resetting, follow a few critical steps: Without backing up, you risk losing photos, contacts, messages, and app settings. Here's a checklist of mandatory actions:

β˜‘οΈ Preparation for the Redmi 5 Plus reset

Done: 0 / 5

Pay special attention to your Mi Account. After a hard reset (via Recovery or Fastboot), the phone may require you to enter the account information that was previously linked. If you forget your password, restore it in advance on account.xiaomi.com. Otherwise, you risk getting a "brick" - a locked device.

Also check the battery status. The reset process can take up to 10-15 minutes, and if the phone runs out during the operation, it will cause a failure. It is optimal to charge the device up to 70-80% or connect to charging during the procedure (but not after the procedure). USB-Hub - only the original cable!).

⚠️ Warning: If you are planning a reset due to viruses or suspicious apps, do not connect your phone to your PC until the procedure is complete.

Method 1: Reset via the settings menu (soft method)

This is the easiest and safest way to do this if the phone is switched on and responsive to commands. Instructions are relevant for MIUI 9-14 (inclusive) that were installed on the Redmi 5 Plus.

  1. Open Settings (the gear icon on the main screen).
  2. Go to the About Phone section. β†’ General settings.
  3. Select Resetting β†’ Delete all data.
  4. The system will be asked to PIN-code or pattern lock (if installed).
  5. Confirm the action by clicking Reset phone (button usually red).

It takes 5-10 minutes, and when it's done, it automatically restarts and prompts you to configure it as new, and it doesn't affect the MIUI version, it's the same as it was before it was reset.

πŸ’‘

If the menu does not have the option β€œReset settings”, try the alternative path: Settings β†’ Additional β†’ Reset and Reset β†’ Reset settings.

Advantages of the method:

  • πŸ”Ή Does not require computer or special knowledge.
  • πŸ”Ή Save the current firmware and does not risk blocking the bootloader.
  • πŸ”Ή Suitable for eliminating software lags without losing warranty.

⚠️ Note: If after reset, the phone asks you to enter a password from your previous Google account (FRP-blocking), and you do not remember it, use the official recovery service: accounts.google.com. FRP Redmi 5 Plus without account data is technically possible, but violates Google’s terms of use.

Method 2: Recovery Mode (hard method)

If the phone doesn't load, freezes on the MI logo, or reboots cyclically, a Recovery reset will help, which is sewn into the firmware and is available even in severe crashes. For the Redmi 5 Plus, the procedure looks like this:

  1. Turn off the phone (press the power button for 10-15 seconds).
  2. Press the Power button + Volume up at the same time and hold for 5-7 seconds until the Mi logo appears.
  3. Release the buttons and you will see the Recovery menu (black screen with blue text in English).
  4. Use the volume buttons for navigation and the power button to select the Wipe Data item.
  5. Confirm the action by selecting Wipe All Data β†’ Confirm.
  6. Once you have finished, select Reboot β†’ Reboot to System.

In the Recovery menu, Redmi 5 Plus is sensitive to prolonged button pressing. If you accidentally chose the wrong item, do not confirm the action - just restart the phone and try again.

Recovery menu itemDescriptionShould I choose?
RebootPhone rebootNo.
Wipe DataDeletion of user data (reset)Yes.
Connect with MiAssistantConnecting to a PC for firmwareNo.
Wipe CacheClearing the cache (does not delete data)Optionally.

If after resetting the phone requires the entry of Mi Account data, and you do not remember them, do not try to bypass the lock through third-party programs - this can lead to a complete loss of access to the device. IMEI).

What happens if Recovery does not open?
If the phone vibrates after holding Power + Volume up, but the screen remains black, try: 1. Connect the charger and repeat the combination. 2. Hold the buttons longer (up to 10-12 seconds). 3. Use the original USB cable to connect to the PC - sometimes this "wakes up" Recovery. If nothing helps, go to the method with Fastboot (described below).

Method 3: Fastboot Reset (for power users)

The method through Fastboot is the most radical and requires a computer with drivers installed. ADB/Fastboot. It's used if:

  • πŸ”§ Recovery is unavailable or damaged.
  • πŸ”§ You need to reflash your phone after a failed update.
  • πŸ”§ Requires to unlock the bootloader (for example, to install custom firmware).

For the Redmi 5 Plus, the procedure is as follows:

  1. Install Platform Tools on PC (includes fastboot).
  2. Turn off your phone and put it into Fastboot mode: press Power + Volume down for 5-7 seconds. The hare in the eardress hat will appear on the screen.
  3. Connect your phone to your PC via USB and open the command prompt (cmd) in the folder with fastboot.
  4. Enter the command to check the connection: fastboot devices If the device is determined (the serial number will appear), continue.
  5. Run reset: fastboot erase userdata fastboot erase cache fastboot reboot

This method removes all data without recovery, including internal memory, and if you plan to flash further, you can unlock the bootloader after the reset by command:

fastboot oem unlock

⚠️ Note: On Redmi 5 Plus, a Fastboot reset may result in Mi Account blocking if Find Device was previously enabled.

πŸ’‘

Fastboot resets are a last resort. If you're not sure what you're doing, you better go to the service center. The wrong commands can turn the phone into a brick.

What to do after resetting: setup and recovery

After a successful reset, Redmi 5 Plus will offer to go through the initial setup, as in the first turn on.

  1. Choose the language and region (Russia is recommended for the correct operation of Google services).
  2. Connect to Wi-Fi. Use a reliable network, which is important for data synchronization.
  3. Sign in to Mi Account (if previously tied) or create a new one. Don't miss this step - without an account, cloud backups and phone search won't work.
  4. Restore data from the backup (if you created it through Mi Cloud or Google Drive).

If you're selling a phone, don't restore your data.

  • πŸ“± Make sure that the device binding is disabled in the Mi Account settings.
  • πŸ“± Log out of all accounts (Google, social media).
  • πŸ“± Perform another reset via settings (double reset ensures all traces are removed).

After discharge, it is recommended:

  • πŸ”„ Update the firmware to the latest version through Settings β†’ The phone. β†’ Updating the system.
  • πŸ›‘οΈ Install antivirus (e.g. Mi Security) and check the system for threats.
  • πŸ“² Reconfigure notifications and permissions for applications (many programs request unnecessary rights after resetting).

Common mistakes and their solutions

Even when following the instructions, Redmi 5 Plus users sometimes encounter problems, and consider typical scenarios and ways to fix them:

Problem.Possible causeDecision
The phone will not turn on after resettingBattery discharged or firmware failureConnect to charge for 30 minutes. If it doesn't work, reset via Fastboot.
Requires a password from your old Mi AccountFind Device function was activeRestore your password to account.xiaomi.com or contact support with a check.
Hangs on the MI logo after being resetSystem or boot partition damagedSwipe your phone with the official firmware through the Mi Flash Tool.
The sensor does not work after resettingFailure of drivers or incompatible firmwareDo the reset again or run a stable version of MIUI.

If it's gone after the dump. IMEI (The phone is not catching the network, this indicates damage NVRAM-You can restore it through the engineering menu:

  1. Please dial the phone application ##4636##.
  2. Go to Phone Information β†’ Choose. SIM.
  3. If IMEI is displayed as Null, you will need firmware via the SP Flash Tool (better contact the service).

πŸ’‘

If the phone is slower to work after the reset than before the procedure, check the animation settings. Go to Settings β†’ About Phone β†’ MIUI version and tap 7 times according to the version. Then to Settings β†’ Additional β†’ For developers, turn off window animations (Window Animation Scale β†’ Off.).

FAQ: Frequent questions about resetting Xiaomi Redmi 5 Plus

Can I reset my phone if it is locked with a pattern lock?
Yes, but only through Recovery or Fastboot, the pattern lock is reset along with the rest of the data, but after the procedure, you may need to enter data from Mi Account if it was tied.
Will the MIUI version reset to factory after a hard reset?
No, reset via settings or Recovery saves the current firmware version, and to roll back to the factory version, you need to flash the phone through the official software through the Mi Flash Tool.
How to avoid blocking Mi Account after resetting?
Before reset, disable Find Device in the Mi Account settings (Settings) β†’ Mi Account β†’ Find Device also make sure to remember your account password.
Can data be recovered after resetting?
If you didn't have a backup, it's unlikely. Programs like Dr.Fone or EaseUS can find fragments of files, but there's no guarantee. It's better to save important data in the cloud or on a PC beforehand.
Why does the phone warm up and discharge quickly?
This is normal in the first 1-2 days: the system indexes files, updates applications and syncs data. If the problem persists longer, check the background processes in Settings β†’ Battery.