How to Reboot Xiaomi Mi 6: From Simple Reboot to Complete Reset

Xiaomi Mi 6

restart

This article will not just tell you how to turn off and turn on the Mi 6, but will help you choose the best way to choose the best way depending on the symptoms, from a basic reboot to disaster recovery via Fastboot. We will also discuss why the smartphone may not respond to standard methods, and what to do if new errors appear after the restart. All instructions are tested on current versions of MIUI and adapted to the features of the Qualcomm Snapdragon 835, which is in this model.

We warn you that not all methods are safe, for example, hard reset will delete all data from internal memory, and incorrect use of Fastboot can turn a smartphone into a brick. So read the warnings carefully and follow the steps.

1. Soft reboot: when the smartphone responds to buttons

If the Xiaomi Mi 6 works but slows down, overheats or opens apps incorrectly, try a soft reboot first.This method is safe, does not delete data and helps in 60% of unstable work.

For this:

1. Press the power button on the right side of the smartphone.
2. In the menu that appears, select Reboot (or Restart if the interface is in English).
3. Confirm the action and wait for the full shutdown / turn on (usually takes up to 30 seconds).

If the problem persists after the reboot, check:

• 🔋 Battery charge – at a level below 15%, the system may not work stable.
• 📱 Free memory – less than 1GB of available space often causes lags.
• 🔄 Updates MIUI — Older software conflicts with new applications.

⚠️ Warning: If the smartphone has been stuck on the Mi logo for more than 5 minutes after a soft reboot, do not try to repeat the action. This is a sign of a system failure and another method will be required (see Section 3 or 4).

Forced reboot: if the screen is frozen or unresponsive

When the Mi 6 is completely frozen (it doesn't respond to touch, volume buttons or power), a forced restart helps, a technique that simulates battery extraction but without disassembling the device.

Instructions:

1. Press and hold the power button + increase volume at the same time.
2. Hold them for at least 10-15 seconds, even if the screen goes out after 5 seconds.
3. Release the buttons after the Xiaomi logo or vibration appears.

This method works even if:

• 📵 The screen is black, but the backlight is on.
• 🔄 The smartphone is stuck in charging mode.
• 🎮 The game or app “hung” the system.

💡

If the smartphone freezes again after a forced reboot, check the body temperature. Overheating above 45 ° C is often caused by background processes - remove unused applications through Settings →

If the forced restart fails, the battery may have run out or a bootloader error occurred, in which case move on to the next section.

Hard Reset: Returning the smartphone to factory settings

Hard reset is a last resort measure that removes all data from internal memory, including photos, contacts, and installed applications.

• The smartphone is constantly rebooted ("bullit").
• Forgot a pattern lock or password.
• The system is damaged after a failed update.

There are two ways to make a hard reset on the Xiaomi Mi 6:

Method 1: Recovery Menu

1. Turn off your smartphone (if it doesn’t respond, use the forced reboot from Section 2).
2. Press the power + volume button and hold until the Mi logo appears.
3. Release the buttons and you will be taken to the Recovery menu (maybe in Chinese or English).
4. Use the volume buttons for navigation and the power button to select Wipe Data → Wipe All Data.
5. Confirm the action and wait for the completion (it will take 2-5 minutes).
6. Select Reboot to reboot.

Method 2: Fastboot (if Recovery is not available)

If the Recovery menu doesn’t open or the smartphone doesn’t turn on at all, you’ll need a PC and Mi Flash Tool.This method is more complicated and risky – wrong actions can block the bootloader.

Step-by-step:

Install Qualcomm drivers on PC| Download Mi Flash Tool from the official website | Connect your smartphone to your PC in Fastboot mode (clamp power + volume reduction) | Download firmware for Mi 6 (the version should match the current!)

-->

1. Transfer the smartphone to Fastboot mode: press the power + volume reduction for 10 seconds.
2. Connect it to the PC via USB-cable (original!).
3. Open the Mi Flash Tool, select the downloaded firmware (.tgz format).
4. Press Refresh – the program must identify the device.
5. Select Clean All mode and press Flash.
6. Wait until it is completed (10-15 minutes) and turn off the smartphone.

⚠️ Note: After reset via Fastboot, the smartphone may require authorization in the Mi Account if previously linked!

4. Restart in Safe Mode: Diagnosing Problem Applications

If Mi 6 is turned on but is unstable (reboots, heats, slows down), the cause may be conflicting applications. Safe mode starts the system with disabled third-party programs, which helps identify the culprit.

How to activate:

1. Press the power button to open the shutdown menu.
2. Press the finger to turn off the power (or Power off) and hold for 3-5 seconds.
3. Confirm the transition to safe mode in the window that appears.

In safe mode:

• 🔍 Check if the lags have disappeared or overheating.
• 📌 Remove newly installed apps through Settings → Annexes.
• 🔄 Reboot your smartphone in normal mode.

If the problem is gone in safe mode, one of the applications is to blame; if it is not, it is due to a system failure or hardware (for example, a worn-out battery).

5. Recovery via Mi Assistant: If the smartphone does not turn on

When the Xiaomi Mi 6 does not respond to any combination of buttons, but the PC identifies it as Qualcomm HS-USB QDLoader 9008, then the device is in emergency mode EDL. To restore the official utility Mi Assistant (formerly Mi PC Suite).

Instructions:

1. Download and install Mi Assistant from the official website.
2. Connect your smartphone to your PC via USB (should be defined as QDLoader).
3. Run the program and select Restore the device.
4. Follow the tips of the master - the utility will automatically download the firmware and re-sweeten the smartphone.

Advantages of this method:

• ✅ It does not require manual selection of firmware.
• ✅ It maintains the guarantee (if it is still valid).
• ✅ It works even with a damaged loader.

⚠️ Warning: Recovery via Mi Assistant resets all data! If there were important files on your smartphone, try extracting them through the device first ADB (If the device is somehow determined by the PC).

6.Diagnostics after restart: what to do next

After a successful restart of the Xiaomi Mi 6, check its performance using this checklist:

Battery charge (should be >20%) | Sensor operation (check swipes and taps) | Wi-Fi/mobile network connection | Camera and microphone operation |Case temperature (should not exceed 40°C in idle)

-->

If you find problems, use the table to fix them:

If none of the methods helped, there may be a problem with the hardware:

• 🔋 Battery - bloating or wear (check in the service).
• 🔌 Charging port - oxidation of contacts.
• 🛠️ EMMC Memory – Chip Wear (Typical for devices older than 5 years).

💡

If after all the manipulations the smartphone does not turn on or gives an error Invalid IMEI, do not try to sew it yourself - this can block IMEI.

FAQ: Frequent questions about the Xiaomi Mi 6 restart