How to restart a hanging Xiaomi phone: 5 working ways (including “bricks”)

Why Xiaomi Phone Hanges and When You Need to Reboot

You picked up a Xiaomi Redmi Note 12 or a POCO X5 Pro, and the screen suddenly stopped responding to touch — a familiar situation? A smartphone freeze can happen for a dozen reasons, from a banal overheating to a critical firmware failure. In 80% of cases, the problem is solved by a forced reboot, but it is important to choose the right method to avoid aggravating the situation.

Modern Xiaomi smartphones based on MIUI or HyperOS rarely "hang" dead — usually the system recovers on its own in 10 to 30 seconds. But if the screen remains black, the Mi logo appears with infinite loading or the phone does not show signs of life, it's time to act. First rule: do not panic and do not try to immediately disassemble the case — in 95% of cases, the problem is software, not hardware.

In this article, we will discuss all the current ways of restarting, from the most gentle (soft reboot) to the “heavy artillery” (Fastboot mode and reset via Recovery).

Method 1: Soft reboot (if the screen reacts)

If Xiaomi’s phone is frozen but the screen still displays a picture (even if it doesn’t respond to touch), try a soft restart.This method is data-safe and works on all models, from the Redmi 9A to the flagship Xiaomi 14 Ultra.

Instructions:

• 🔄 Hold the power button (usually located on the right) for 10-15 seconds until the off menu appears.
• 📱 If the menu does not appear, but the screen goes out, release the button and hold it again until vibration (usually 5-7 seconds).
• 🔋 In some models (for example, POCO F5) You may need to press the power button. + loudening.

After the reboot, check if the system notifications show up, and if the phone freezes again after a few minutes, the problem is deeper, and one of the following methods will be required.

💡

If the soft reboot didn’t work, try connecting your phone to charge for 5-10 minutes, and sometimes freezing is associated with a critical battery drain, even if the indicator showed 20-30% charge.

Method 2: Forced shutdown (if the screen is black or unresponsive)

When Xiaomi’s smartphone is fully “bricked” — it doesn’t turn on, vibrate, or show the logo when charging — it’s time to use hardware reset, a technique that mimics battery extraction (which is not possible on modern models with built-in battery).

How to do this:

1. 📵 Hold the power button and increase volume at the same time for at least 20 seconds.
2. 🔄 If the screen remains black, release the buttons and repeat the action by adding a volume down button (total clamping all three buttons).
3. ⚡ Some models (e.g. Redmi Note 11 Pro)+) Only a combination of food can work. + volume-reducing.

After the forced shutdown, wait 30 seconds and try to turn the phone on in the usual way. If it boots, the problem is solved. If not, move on to the next method.

Method 3: Boot to Recovery Mode (if the phone is turned on but not booted)

If Xiaomi is turned on but stuck on the Mi logo or reboots endlessly, Recovery mode will help. Through it you can reset your settings to factory settings or reinstall the firmware without losing data (in some cases).

How to log in to Recovery:

• 🛠️ Turn off your phone (forced if it doesn’t respond).
• 🔧 Press the power button and increase volume at the same time.
• 📱 Hold them until the Mi logo appears, then release them when the Recovery menu appears (usually in English or Chinese).

In the Recovery menu, use volume buttons for navigation and power buttons for selection.

• Reboot → Reboot to System – Regular Reboot.
• Wipe Data → Wipe All Data – Complete reset (deletes all data!).
• Connect with MIAssistant – Connect to a PC for recovery via the Mi Flash Tool.

Method 4: Fastboot Mode (for power users)

If Xiaomi's phone doesn't boot even into Recovery, it's Fastboot mode. It's designed to run through a PC, but sometimes helps to "reanimate" the device without losing data.

How to log in to Fastboot:

1. 📵 Turn off your phone completely (forced).
2. 🔧 Press the power button. + volume-reducing.
3. 🖥️ Hold it until the image of the hare in the eardress cap appears (Fastboot logo).

Further action depends on the purpose:

• 🔄 For a simple reboot: connect your phone to your PC, open the command line and type in: fastboot reboot
• 📥 For flashing: use the Mi Flash Tool (instructions on the official Xiaomi website).

⚠️ Note: In Fastboot mode, don’t try to execute commands unless you’re sure they’re there. For example, fastboot erase userdata will delete all your data without any recovery.

Method 5: Hardware reset (if nothing helps)

When all software methods are exhausted and the Xiaomi phone is still out of power, there is a hardware reset, which means physically shutting down the battery — but on modern models, this is impossible without disassembling. Instead, use test points (for power users).

Algorithm of action:

1. 🛠️ Remove the back cover (on models with a removable cover, for example, Redmi). 9C).
2. 🔋 Find the battery connector and disconnect it for 10-15 seconds (requires a plastic blade).
3. 📱 For non-removable batteries (for example, Xiaomi) 13T) Find a test point on the motherboard (usually signed) TP) And lock it on the body with a screwdriver.

After the hardware reset, the phone should turn on normally, if not, there is a problem in the hardware (damaged board, power controller, etc.), and repairs are required at the service center.

What to do if Xiaomi phone freezes after update

One of the most common scenarios is to freeze after a MIUI or HyperOS update, which can happen because of:

• 📥 Interrupted firmware loading (for example, the battery is sat down).
• 🔧 Incompatibility of the software version with the phone model.
• 🛠️ Mistakes in manual firmware through Fastboot.

Decision:

1. 🔄 Try a soft reboot (method 1).
2. 📱 If it doesn’t work, log in to Recovery (method 3) and select Wipe Cache (not Wipe Data!).
3. 🖥️ When loading endlessly, connect your phone to your PC and use the Mi Flash Tool to flash it (instructions on the official website).

⚠️ Note: If the phone is stuck in the Anti-Rollback stage, do not try to sew the old version. MIUI — This will lock the bootloader permanently.

Freeze prevention: 5 tips for Xiaomi owners

To minimize the risk of hanging, follow these recommendations:

• 📵 Regularly reboot your phone (every 2-3 days) – this clears the RAM.
• 🔋 Do not allow battery discharge below 10% – this can cause failures on the next turn on.
• 📥 Install updates only through Settings → The phone. → Update the system, not through third-party sites.
• 🧹 Clean the cache manually: Settings → Warehouse → Clear the app cache.
• 🛡️ Turn off battery optimization for system applications: Settings → Battery → Optimizing the battery.

If your Xiaomi often freezes for no apparent reason, check it for viruses (for example, through Mi Security) or perform a factory reset (pre-saving data).

💡

Most of Xiaomi’s freezes are due to software failures, not hardware breakdowns, and 90% of the time, forced reboots or resets via Recovery help.

FAQ: Frequent questions about Xiaomi hangouts