How to restart Xiaomi device with buttons: full instruction

A Xiaomi TV that is not responsive to the remote, or a smartphone that is no longer responsive to touch, is a familiar situation, and in such cases, hard rebooting through hardware buttons is the only way to bring the device back to life. But how do you do it properly so as not to aggravate the problem?

In this article, we’ll look at all possible scenarios, from simple reset to forced firmware recovery, and see which button combinations work for different Xiaomi models (including Mi TVs). TV, smartphone Redmi/POCO And smart devices, how to avoid common mistakes, and what to do if standard methods don't work, and we'll focus on things that aren't written in the official manuals, like how to tell a soft reset from a full reset to a factory setting.

When do I need to reboot the buttons?

Hardware reset is an extreme measure, which is resorted to in three cases:

• 🔄 System freeze: the device does not respond to the remote, sensor or keyboard for more than 5 minutes, for example, after installing an application or updating the software.
• 🔌 Cyclical loading: logo Mi or POCO It appears over and over again, but the system does not start (so-called bootloop").
• ⚠️ Critical errors: black screen after a failed update, graphics driver failure, or file system corruption.

It is important to understand the difference between a soft and hard reboot:

⚠️ Note: If the Xiaomi device is in the process of updating the firmware (the progress bar is on the screen), you can not interrupt it with a hard reboot - this will lead to "bricking" (complete inoperability). In this case, wait until the completion or if the process has stalled at one percent for more than an hour, use the Fastboot recovery method.

Reboot of Xiaomi Mi TVs TV button-button

Xiaomi TVs (series Mi) TV 4/4A/4S/5/5X/Q1/Q2 There's a hidden reset button, but it depends on the model:

Method 1: Power button on the body

On most models, the power button is combined with the reset button.

• 📺 Mi TV 4/4A/4S: on the bottom of the screen (right or left of the logo).
• 📺 Mi TV 5/5X/Q1/Q2: on the back, next to the connectors. HDMI.
• 📺 Mi TV Stick/Box: a single button on the body (usually on the side).

Instructions for hard reboot:

1. Press and hold the power button for 10-15 seconds.
2. Release when the screen goes out (or the Mi logo flashes 3 times).
3. Wait 30 to 60 seconds for the TV to turn on automatically.

⚠️ Attention: On Mi TV Stick button retention for more than 20 seconds triggers Recovery Mode. If you see a menu with items in English, release the button and select Reboot system now using the remote (or volume buttons on the case).

Method 2: Reset via service menu (for experienced)

If the TV is turned on but not running smoothly, you can try resetting via a hidden menu. TV:

Perform sequence on the remote:

Settings → Device → About the device → Quickly press 5 times on the “Android Version”

After that, a menu will be opened for engineers, where you can:

• 🔧 Select Factory Reset (full reset).
• 🔄 Run Reboot to Bootloader (for Fastboot firmware).

Reboot of Xiaomi smartphones (Redmi, POCO, Mi)

On Xiaomi smartphones, the procedure depends on the presence of a removable battery (in older models) and the firmware version. Let’s analyze current methods for devices in 2018-2026.

Models with removable battery (Redmi) 4/4A, Mi A1 older)

If the back cover is removed, the most reliable way is:

1. Turn off the phone (if it responds to the power button).
2. Remove the lid and remove the battery for 10-15 seconds.
3. Insert the battery back and turn on the device.

This method is guaranteed to reset all temporary data in RAM, but does not affect files in internal storage.

Models with non-removable battery (Redmi Note) 5/6/7/8/9/10/11, POCO F/X/M, Mi 10/11/12)

For modern smartphones, use a combination of buttons:

Hard reboot:

• 📱 Keep your food down. + Reduce volume for 10-15 seconds.
• 📱 In some models (for example, POCO F3/F4) powered + Volume up.

Forced entry into Recovery Mode (for reset or firmware):

• 🔧 Turn off the phone (if possible).
• 🔧 Keep your food on. + Increase the volume before the appearance of the Mi logo.
• 🔧 In the recovery menu, select Reboot. → System for a normal reboot.

Charge the battery to at least 30%|Disconnect from the charger|Remember the button combination for your model|Prepare a backup on-line method (for example, charging with a button)

-->

On Xiaomi MIUI 12/13/14 After a hard reboot, you may receive a request to enter the Mi Account password (if you previously had your account binding enabled). Make sure you remember the username and password, otherwise unlocking will require contacting the service center.

Reboot of Xiaomi smart devices (columns, routers, watches)

In addition to TVs and smartphones, Xiaomi has an ecosystem of smart gadgets that can also hang out.

Smart speakers (Mi Smart Speaker, Mi) AI Speaker)

If the column does not respond to voice commands or buttons:

1. Shut it off the grid for 10 seconds.
2. Hold the Mi (or Power) button when you connect the power.
3. Wait for the sound signal (onset sound).

Routers (Mi Router) 4/4A/4C/5/6, AX)

To reboot the router:

• 📶 Press the Reset button (usually located in a small hole on the back) and hold for 5-7 seconds.
• 📶 If you need to reset to factory settings, hold 10-15 seconds (indicators flash yellow).

Note: After resetting the router, you will have to reconfigure the network (including the Wi-Fi password and provider settings).

Smart watches and bracelets (Mi Band, Mi Watch)

For Mi Band gadgets 4/5/6/7 and Mi Watch:

• ⌚ Disconnect the bracelet from the charger (if connected).
• ⌚ Press and hold the touch button (or screen area) for 20 seconds.
• ⌚ Wait for vibrations and resets.

💡

If Xiaomi’s smartwatch doesn’t turn on after a reboot, plug it into charging for 30 minutes – sometimes a discharged battery blocks startup.

Frequent Mistakes and How to Avoid Them

Even a simple reboot can be a problem if you make one of these mistakes:

• ❌ Interrupt Update: As mentioned, a hard reset during firmware installation causes the boot partition to be lost. Always wait for the process to be completed (even if it takes several hours).
• ❌ Use of incorrect button combinations: For example, POCO X3 retention + Increased volume triggers the Fastboot, not the reboot.Clarify the combination for your model!
• ❌ Ignoring indicators: If a red or orange LED lights up after a reset, it is a sign of hardware failure (for example, battery or motherboard problems).

Another common problem is the bootloop after a hard reset.

• 🔄 Damaged firmware (for example, after a failed rooting).
• 🔄 Application conflict (often occurring after an update) MIUI).
• 🔄 Hardware failure (processor overheating, memory malfunction).

Decisions:

1. Try to go to Recovery Mode and select the Wipe Cache Partition.
2. If it does not help – run the device through Fastboot (instructions for specific models are on the forum). XDA Developers).
3. If hardware malfunctions, contact the service (self-repair without experience is fraught with aggravating the problem).

💡

If the device doesn't turn on after rebooting, check the battery first (plug it in for 15-20 minutes), and 30% of the time, the dead state is associated with a complete discharge.

Alternative resetting methods

If the hardware buttons are not working or are not available, try these methods:

Through ADB (for advanced users)

If the phone is debugging on USB, You can restart it from the computer:

adb reboot

For forced reboot in Recovery:

adb reboot recovery

If the device is not responding but is defined by the computer as Qualcomm 9008, it can be “resuscitated” using the Mi Flash Tool (requires official firmware in.tgz format).

Over the remote (for TVs)

Some Mi models on some of them TV It's a secret combination:

1. Press the Menu button on the remote. + Home at the same time.
2. Hold on for 10 seconds and the TV will restart.

This method works even if the remote is partially faulty (for example, the volume buttons do not work).

Through the cloud service (for smartphones)

If the Find Device function is enabled on the phone, you can reboot it remotely:

1. Sign in to i.mi.com under your Mi Account.
2. Select the device in the list.
3. Click Reboot (not available on all models).

What do you do if nothing helps?

If the device does not respond to any of the described procedures, the following scenarios are possible:

• 🔋 Power problems: For smartphones: check the cable and power supply (try charging from another device). For TVs: make sure the power outlet is working (plug in another device).
• 🔧 Hardware failure: If after pressing the power button there is no reaction (the indicator does not burn, there is no vibration), there may be a malfunction of the motherboard or power controller. For TVs: check the screen light (light with a flashlight - if the image is barely visible, the problem is in the light. LED-ribbon).
• 🖥️ Software glitch: If the device vibrates or flashes the indicator but doesn’t turn on, try flashing it through Fastboot or EDL Mode (this will require a computer and special software).

In the most difficult cases (for example, after unsuccessful overclocking of the processor or pouring liquid), there is only one option - contacting the service center. mi.com/global/service. Average cost of diagnosis — 500–1000 ₽, repairs 1500–10 000 ₽ depending on the fault.

⚠️ Warning: Before visiting the service, back up your data (if the device is switched on at all) After repairing all files can be deleted, and restoring information on damaged drives costs between 5,000 and 30,000 ₽.

FAQ: Answers to Frequent Questions