How to reboot Xiaomi Redmi 7A buttons: all ways

Xiaomi Redmi 7A is a popular budget model that can sometimes hang or stop responding to touch. In such situations, a standard shutdown through the menu is not available, and the only way to bring the device back to life is by forced reboot using physical buttons. But how do you do it right so as not to damage the system?

In this article, we will take a look at all the possible ways to reboot the Redmi 7A through the buttons, from basic keyboard shortcuts to alternative ways to lock the screen or crash software. You will learn what combinations work on this model, how to avoid accidental resetting, and what to do if the smartphone does not respond even to hardware buttons.

Important: The procedure is different from rebooting other Xiaomi devices (e.g. Redmi Note 8 Pro or Poco) X3), So the instructions for the other models are not going to work here. MIUI custom-assembly.

Why Redmi 7A may require a forced reboot

The smartphone has been stuck for a reason, usually due to system errors or hardware problems, and these are the main reasons why a hard reset is required:

🔄 Interface freeze: the screen does not respond to touch, but the display is turned on (often after updating) MIUI installing applications).
🖥️ "Black screen: the device does not turn on, but vibrates when charging or pressing buttons.
🔋 Failure after discharge: if the battery is completely sat down, and after charging the phone does not start.
🤖 Android Errors: Cyclical Bootloop or No Command message when you try to turn on.
🔧 Failed Update: After Fastboot or Recovery, the system does not load.

80 percent of the time, the problem is solved by a standard button reboot, but if the smartphone is in a bootloop or if it gives an error, "This MIUI version cannot be installed on this device," you'll need to do more, read the Recovery Mode section.

⚠️ Attention: If Redmi 7A overheats when getting stuck (body temperature above 45)°C, don't try to reboot it right away. Let the device cool for 10-15 minutes - forced reboot in this state can damage the battery.

Method 1: Standard reboot through the power button

The simplest method that works is if the screen is responsive to pressing, but the system is suspended.

📱 Annex “hang” and does not close.
🔄 Interface. MIUI slows down or does not respond to gestures.
🔋 The phone is discharged "to zero" and does not turn on after charging.

Instructions:

Press the power button (located on the right end of the body) and hold it for at least 10-15 seconds.
Wait for the vibration and the appearance of the Redmi logo - this is a signal to start the reboot.
Release the button and wait 1-2 minutes until the system is fully booted.

If the smartphone freezes again after that, the problem may be a damaged cache or application conflict, in which case downloading in safe mode will help.

Make sure the battery is more than 10%.

Turn off the charger (if connected)

Check if the volume button is pressed (may block the onset)

Wait for the device to cool if it is hotter-->

Method 2: Forced reboot under black screen

If the display doesn't turn on, but the phone vibrates when you press buttons or charge, use an alternative key combination, which works even in severe system failures.

Step-by-step:

Press the Power button and the Volume Up button (top key on the left end).
Hold them for 20 to 30 seconds until you feel the vibration and see the Mi logo.
If the screen is still black, release the buttons and try again in 10 seconds.

If this method does not work, try another combination:

Power button + Volume button (hold 15-20 seconds)

⚠️ Warning: Do not hold the buttons for more than 30 seconds, this can lead to the transition to Fastboot mode (if it is not blocked), in which case the image of a rabbit in a hat will appear on the screen (Mi Bunny).

Yes, often hanging out after updates

1 to 2 times was the black screen

Never had a problem.

Another case (write in the comments)-->

Method 3: Reboot in Safe Mode

If the smartphone is turned on, but immediately freezes or slows down, the problem may be in the conflicting application, in which case the Safe Mode, where all third-party programs are disabled, will help.

How to download in Safe Mode:

Turn off the phone (if it reacts) or perform a forced reboot (see Method 2).
When the Redmi logo appears, press the Volume Down button and hold it until the download is complete.
In the lower left corner of the screen will appear the inscription "Safe mode".

In this mode:

📱 Only standard applications (Settings, Phone, Messages) work).
🔍 Check if the freezes are gone. If so, uninstall the newly installed programs.
🔄 To exit Safe Mode, simply restart your phone in the usual way.

💡

If the phone is stable in Safe Mode but freezes again after normal booting, reset the cache via Recovery (see next section).

Method 4: Reboot through Recovery Mode

If Redmi 7A does not turn on or cyclically restarts, you may need to enter the recovery mode (Recovery Mode), where you can reset or perform a full reset (hard reset).

How to log in to Recovery:

Turn off the phone (if it is on, hold the power button for 10-15 seconds).
Press the Power button and the Volume Up button at the same time.
Hold them until a menu with the Mi logo and the words "Recovery" appears.

The following options are available in the Recovery menu (in English or Chinese):

Option.	Action.	When to use
Reboot	System restart	If the phone is frozen but no reset is required
Wipe Data	Full reset (hard reset)	For bootloop or critical errors
Wipe Cache	Clearing the cache	If the system is slowed down after the update
Connect with MiAssistant	Connecting to a PC for firmware	If you need to re-flash the device

To reset the cache (without data loss):

Select Wipe Cache using volume buttons.
Confirm the choice of the power button.
After cleaning, select Reboot.

⚠️ Note: Wipe Data removes all data (photos, contacts, apps) and only use it if other methods fail and you have a backup.

What to do if a password is required in Recovery?

If you have a password request after you select Wipe Data and you don't remember it, you'll need to flash your phone through Fastboot on your PC, and you'll need the official firmware for Redmi 7A (codename pine) and the Mi Flash Tool.

Method 5: Reboot via Fastboot (for power users)

If the phone only loads in Fastboot mode, it can be rebooted via commands via a computer, a method that requires ADB/Fastboot drivers installed and minimal command line knowledge.

Step-by-step:

Get Redmi on board. 7A PC-only USB-cable.
Open the command prompt (cmd) and type: fastboot devices If the device is determined (the serial number will appear), continue.
Run the reboot command: fastboot reboot

If you need to reset the cache via Fastboot:

fastboot erase cache


fastboot reboot

For a complete reset (similar to Wipe Data in Recovery):

fastboot erase userdata


fastboot erase cache




fastboot reboot

💡

Fastboot commands should only be used if you are confident in your actions. Wrong commands can lead to the "bricking" of the device (completely inoperable).

What to do if nothing helps

If Redmi 7A does not respond to any combination of buttons, the reasons may be hardware:

🔋 Battery discharge: Even if the phone was on charge, the contacts could oxidize.Try another charger or plug into a PC.
💧 Moisture: If the phone was in contact with water, it could have been a circuit, which requires disassembly and drying.
🔧 Damaged power button: If the button is not pressed or stuck, it must be replaced.
🔌 Power controller failure: rare fault requiring repair at service center.

Before visiting the service, try:

Connect the phone to charge for 1-2 hours (even if the indicator does not burn).
Heat the battery with a hairdryer (temperature not higher than 40 ° C) - sometimes this "revives" the discharged battery.
Connect to a PC and check if the device is detected in Device Manager (section "Portative devices").

If after these manipulations the phone does not show signs of life, most likely, you will need a diagnosis in the service center Xiaomi.

FAQ: Frequent questions about Redmi 7A reboot

Can I reboot the Redmi 7A without a power button?

Yes, but only if the button is physically damaged, plug the phone into charging and wait until it starts to boot automatically (unless the battery is drained), and try plugging the keyboard into a USB OTG and using it to reboot through ADB.

After the reboot, the phone requires a password, but I don't remember it.

If you have forgotten the pattern lock or PIN-If you have a code, and your fingerprint doesn't work, you'll have to do a hard reset with Recovery (see Method 4). All data will be deleted. In the future, set up unlocking through your Mi Account.

The phone reboots on its own. What's the reason?

The reasons may be software or hardware: 🔄 Firmware failure: Try updating MIUI through settings → The phone. → Updating the system. 🔋 Faulty battery: If the phone turns off at 20 to 30% charge, a battery replacement is required. 📱 Application Conflict: Check the Work in Safe Mode.

Can I reboot Redmi 7A from a computer without a Fastboot?

Yes, if the phone is debugging over USB (Settings → Developer → Debugging over USB), in this case you can use the command: adb reboot But this method only works if the system responds to commands in any way.

Once reset via Recovery, the phone doesn't turn on.

If you don't boot your Wipe Data, you may have a firmware problem. Try: Fastboot your phone with your official firmware (you can download it from en.miui.com), use the Mi Flash Tool to restore your system. If you're not sure what you're doing, contact the service center.