Xiaomi Redmi Note 4X is one of the most popular smartphones of the brand, released in 2017, but still actively used. However, even such a time-tested device sometimes fails: it starts to brake, does not respond to touch or even “hangs tightly”. In 80% of cases, the problem is solved by a banal reboot, but not all users know how to do it correctly, especially if the screen does not respond.
In this article, we will discuss all possible ways to reboot the Redmi Note 4X – from the standard soft reboot to forced reset via Recovery Mode. Particular attention will be paid to the nuances that depend on the firmware version (MIUI 8-14) and the state of the device (is the sensor working, is the screen on fire, is responsive to charging), and you will learn how to avoid typical errors that cause the smartphone to finally “brick”.
1. Soft reboot: the standard method
If the Redmi Note 4X is touch-sensitive but is unstable (brakes, apps fly out, interfaces push), try a soft reboot first.This method is safe, does not delete data, and is suitable for regular refreshing of the system.
How to do this:
- 📱 Hold the power button (also called the power button) for 2-3 seconds.
- 🔄 On the screen will appear menu with options to Turn off, Reboot and Emergency mode.
- 👆 Select Reboot and confirm the action.
The smartphone will turn off and re-energize in about 30 to 40 seconds, and if you have problems after that, move on to the next method.
⚠️ Note: If the menu does not have the Reboot option, but only turn it off, select it - after turning off the device will turn on automatically after 5-10 seconds (this is normal for Redmi Note). 4X older versions MIUI).
Forced reset: if the screen does not respond
When the Redmi Note 4X is completely frozen (no touch response, black screen or frozen in one image), a hard rebate is required, a technique that mimics battery extraction, but on modern smartphones with a fixed battery, it is performed by a combination of buttons.
Instructions for Redmi Note 4X:
- 🔋 Hold the power button. + volume-boost.
- 🕒 Hold them for 10-15 seconds until the screen goes out and the smartphone vibrates.
- 📱 Release the buttons – the device will start to restart (the Mi logo will appear).
If the combination does not work, try an alternative:
- 🔋 Power button + volume-cutting button by 10+ seconds.
- 🔄 On some firmware, only the power button is held for 20 seconds.
Try another combination (power + volume up/down)
Connect to charging for 10 minutes, then try again
Check if the power button is stuck (move it carefully)
If the screen is black, flash a flashlight to make sure it is off, not just dark.-->
On the Redmi Note 4X with custom firmware (like LineageOS), a hard reboot can cause a download to Fastboot Mode, in which case, select the Reboot System menu using volume buttons and confirm with the power button.
3.Reboot via Recovery Mode: if the smartphone does not turn on
If the Redmi Note 4X doesn’t respond to any combination of buttons, but when connected to charging, the indicator (red/orange LED) may help to reboot through Recovery mode.
Step-by-step:
- 🔌 Turn off your smartphone (if it is turned on, use the hard rebut from the previous section).
- 🔋 Hold the power button. + The volume button will be increased until the Mi logo appears.
- 📱 Release the power button, but keep the volume up until you see the Recovery menu (usually with an image of an Android robot and the inscription No command).
- 🔄 From the menu, select Reboot system now (use volume buttons for navigation and power button for confirmation).
If the menu is in Chinese, focus on the first line - this is the reboot. In the Redmi Note 4X with stock Recovery, options are also available:
- 📁 Wipe data – reset to factory settings (deletes all data!).
- 🔧 Wipe cache – clearing the cache (safe, data is not deleted).
- 📥 Apply update from ADB — installing updates via computer.
⚠️ Warning: If you select Wipe data in Recovery, the smartphone will return to factory settings, and all data (photos, contacts, messages) will be erased. This step is justified only if the device does not turn on or is stuck on the Mi logo.
What to do if a password is required in Recovery?
4.Reboot via Fastboot Mode: for power users
If the Redmi Note 4X loads into Fastboot mode (the screen shows a bunny in a hat and the inscription FASTBOOT), this means that the system cannot boot normally. This mode often appears after a failed update or firmware failure. To restart the device from here, follow the instructions:
Method 1: Through the Fastboot Menu
- 🔧 Use volume buttons to select the Reboot item.
- 🔘 Confirm the choice of the power button.
Method 2: Using a computer (if the first method fails)
- 💻 Connect your smartphone to your PC through USB-cable.
- 📥 Install the drivers. ADB/Fastboot (You can download from the official Xiaomi website or through the Mi Flash Tool).
- 🖥️ Open the command line (Win) + R → Type in cmd and execute the command: fastboot reboot
If the smartphone is back on Fastboot after the reboot, it indicates a serious firmware error, in which case you will need to reflash the device via the Mi Flash Tool (instructions are available on the 4PDA or XDA Developers forums).
💡
If the Redmi Note 4X is constantly loading into the Fastboot, check if the volume button is accidentally pressed when turned on. On some devices, a sticky button can trigger this mode.
Rebooting with the battery: an extreme case
On the Redmi Note 4X with a non-removable battery, this method is only applicable if you have experience disassembling smartphones. Removing the battery simulates a complete power outage and can help if the device does not respond to any combination of buttons. However, we recommend using this method only as a last resort!
How to do this:
- 🛠️ Carefully tuck the back cover with a plastic spatula (start at the bottom edge where the speakers are located).
- 🔋 Disconnect the battery plume from the motherboard (it is fixed with a connector that can be tampered with a nail or plastic tool).
- ⏱️ Wait 1-2 minutes, then plug the plume back in.
- 🔄 Collect your smartphone and try to turn it on with the power button.
⚠️ Attention: Disassembly of Redmi Note 4X It cancels the warranty (if it is still valid) and can damage the plumes or contacts.
Alternative to disassembly - discharging the battery to zero:
- 🔌 Connect the smartphone to charging and wait until it is completely discharged (charging indicator will go out).
- 🕒 Leave it off for 10-12 hours.
- 🔋 Connect to charging again – sometimes it helps to “wake up” the device.
6. Frequent mistakes and how to avoid them
Many Redmi Note 4X users make common reboot errors that can make the problem worse, and let’s look at the most common ones and how to prevent them.
| Mistake. | Effects of consequences | How to avoid |
|---|---|---|
| Reset via Recovery without backup | Loss of all data (photos, contacts, messages) | Before resetting, save data to your PC or Mi Cloud |
| Use of informal firmware | Hazes, bootloop, loss of IMEI | Install only stable versions of MIUI from the official website |
| Interruption of the updating process | Damage to system files, “bricking” | Do not turn off your smartphone while installing updates |
| Frequent hard rebuttals | Depreciation of flash memory, damage to the file system | Use a soft reboot if the screen reacts |
Another common problem is that the smartphone doesn't turn on after the reboot, and the reasons can be different.
- 🔋 Battery discharged (connect to charging at 30)+ minute).
- 🔌 Faulty cable or adapter (try another charger).
- 📱 The connector is damaged. USB-C (Check for dirt or oxidation).
- 🔧 Firmware failure (reflashing through Fastboot will be required).
💡
If the Redmi Note 4X does not turn on after several attempts to reboot, do not try to repeat the actions endlessly, it is better to connect to charging for 1-2 hours once or contact the service.
7.When the reboot doesn't help: next steps
If none of these methods worked, the problem could be more serious than a software failure, and consider possible scenarios and solutions.
Scenario 1: The smartphone turns on, but immediately turns off
- 🔋 Battery problem (wear, bloat). Solution: Replace the battery.
- 🔌 Power controller malfunction. Solution: diagnostics in the service.
Scenario 2: The screen is black, but the smartphone vibrates
- 📱 The display plume or the matrix itself is damaged.
- 🔧 Graphics driver failure Solution: Firmware or Reset via Recovery.
Scenario 3: Cyclical reboot (bootloop)
- 📥 System partition damaged. Solution: firmware via Mi Flash Tool.
- 🔧 Module conflict after update. Solution: rollback to previous version MIUI.
If you are not sure about the cause of the malfunction, use the diagnostic menu of Xiaomi:
- 📞 Enter the dialer code: ##4636##.
- 📊 Select Battery Information or Equipment Testing.
- 🔍 Check the status of the battery, sensors and other components.
💡
With an unlocked bootloader, Redmi Note 4X can install custom Recovery (such as TWRP) which gives you more options to restore the system, but this requires experience and can lead to loss of warranty.