How to turn off the TV Xiaomi buttons: 5 working ways

Xiaomi Mi TVs are known for their convenience, but sometimes users are faced with a situation when the remote is lost, discharged or not working, and the screen is getting stuck. In such cases, physical buttons on the device body come to the rescue. However, their location and functionality depend on the model and year of release - the Mi TV 4A has a single button, the Mi TV Q2 has a touchpad, and the Mi TV P1 has a combination of several keys.

In this article, we’ll look at all the ways you can turn off Xiaomi TVs without a remote, from standard power button retention to forced reset via the service menu. You’ll learn how to properly turn off your device in different scenarios — when you freeze, update your firmware or break your remote control. And also look at hidden button functions that are not mentioned in the official documentation.

Where are the control buttons on the Xiaomi TV

Depending on the model and generation of Xiaomi TVs, the buttons can be placed in different places, most devices have them hidden on the bottom or sidebar, but sometimes they are difficult to notice due to the minimalist design.

• 🔘 Single power button - occurs on budget models (Mi) TV 4A, Mi TV 4S). Usually located on the right side on the lower frame, can be recessed in the body.
• 🎛️ Touch panel - models Mi TV Q1/Q2 mi TV P1 instead of physical keys, a touch bar with icons is used (power, volume, source).
• 🔄 Button combinations – on some devices (e.g. Mi) TV 5 Pro) has separate keys for power, channel switching and volume settings.
• 🔌 Hidden reset button - on the back next to ports HDMI or USB There may be a small hole for emergency shutdown (clip required).

To find buttons on your model, look at the TV in good lighting – they are often colored and contrast poorly. On some devices (for example, Mi TV A2 43), the power button is combined with a status indicator: if it flashes red, the TV is in standby mode.

Method 1: Standard shutdown by holding the power button

The easiest and safest method is to hold the physical power button, which works on all Xiaomi models, but the retention time may vary:

1. Press the power button once. If the TV reacts (for example, goes into standby mode), repeat the press to completely turn off.
2. If a single press fails, hold the button for 5-10 seconds until the screen goes out. Some models (Mi TV Q2) require holding up to 15 seconds.
3. After turning off, wait 30 seconds before re-energizing - this will allow the capacitors to discharge and avoid failures.

On Touch Bar TVs (Mi TV P1), instead of holding, use a double tap on the power icon at intervals of less than 1 second. If the panel does not respond, try to wipe it with a dry cloth - sometimes contaminants block the sensors.

💡

If the power button does not respond, try to disconnect the TV from the socket for 1 minute - this will reset temporary errors without losing settings.

Method 2: Forced shutdown via button combination

If the Xiaomi TV is getting stuck and does not respond to the power button holding, you can use an emergency combination. This method works on most models, but may differ for different generations:

After applying the combination, the TV should turn off within 5-20 seconds. If this does not happen, try repeating the action or moving on to the next method. On models with Android TV 10+ (for example, Mi TV Q2 2022), a forced shutdown can cause a system integrity check on the next turn on - this is normal and does not require intervention.

⚠️ Note: Do not use button combinations more than 1 time per hour.Frequent forced shutdowns can cause damage to the file system and the need for a complete reset.

Method 3: Disconnect via the service menu (for power users)

If the Xiaomi TV is turned on but does not respond to the remote and buttons, you can try turning it off through the service menu.This method requires care, as incorrect actions can reset settings.

Instructions for models on Android TV:

1. Turn on the TV with the power button.
2. On the remote (if it works partially) or through the touch panel go to Settings → Device → About TV.
3. Find the Build Number and click on it 7 times in a row to activate the developer mode.
4. Return to Settings → Device → Developer Settings and select Local Shutdown.

For PatchWall TVs (e.g. Mi TV 4X in India):

1. Press the Home button on the remote (or the touch button "Home" on the panel) for 10 seconds.
2. In the menu that appears, select Advanced Settings → Power Off.

Method 4: Emergency reset via Reset button

Some Xiaomi models (such as the Mi TV 4A 32" or Mi TV 4S 55) have a hidden reset button that allows you to turn off the TV in critical situations.It is located on the back next to the ports and looks like a small hole that says RESET.

Instructions for use:

1. Turn the TV off the socket.
2. Take a paperclip or toothpick and press the RESET button (it should click).
3. Hold it for 15-20 seconds, then plug the power back in.
4. The TV will turn on in recovery mode – select Power Off using volume buttons and confirm with the power button.

⚠️ Attention: Button RESET on some models (Mi) TV Q1) It does a full reset to factory settings. If you're not sure, it's better to use other shutdown methods.

If after clicking RESET the TV started to update or showed the Xiaomi logo for more than 5 minutes, do not interrupt the process - wait for the download to be completed.

Method 5: Shutdown via external devices (HDMI-CEC)

If your Xiaomi TV supports HDMI-CEC technology (it is turned on by default on most models), it can be turned off using connected devices:

• 🎮 Game console (PS5, Xbox) – in the console settings, activate the "Manage TV" option and turn off the console.
• 📺 Satellite receiver – if the receiver is connected to HDMI, Use his remote to send a shutdown command.
• 💻 Computer or laptop - through the Mi Remote Controller (available for use) Windows/macOS) You can emulate the remote signal.

To check if HDMI-CEC is on your TV:

1. Go to Settings → Connections → HDMI-CEC.
2. Make sure the option is activated (can be called AnyView Cast or Simplink).
3. If the function is disabled, turn it on and restart the TV.

💡

HDMI-CEC allows you to control your TV through remotes of other devices, but only works if both devices support this technology.

What to do if the TV is not turned off in any way

If none of these methods worked, the TV may be in one of the critical states.

• 🔄 Clocked Update – The screen shows the Xiaomi logo or progress bar for longer than 30 minutes, in which case turn off the power for 5 minutes, then try again.
• 🔥 Overheating – if the case is hot, let the device cool for 1-2 hours before re-energizing.
• ⚡ Failure of the power supply – if the indicator does not burn or flashes a non-standard color (for example, green), diagnostics are required in the service center.
• 🛠️ Hardware malfunction - if after turning off the TV immediately turns on again, a motherboard may break.

In extreme cases, you can try a full reset to factory settings:

1. Turn off the TV.
2. Press the power button and, holding it, connect the power back.
3. Hold the button for 30 to 40 seconds until the recovery menu appears.
4. Select Wipe Data/Factory Reset (use volume buttons for navigation).

⚠️ Warning: Full reset will remove all installed apps, accounts and settings. After the procedure, you will need to reset the TV, including a Wi-Fi connection and login to Mi Account.

FAQ: Frequent questions about turning off Xiaomi TVs