How to turn off recovery on Xiaomi Redmi: safe ways to get out of recovery mode

Recovery mode on Xiaomi Redmi smartphones is a utility tool for system recovery, resetting or installing updates. However, sometimes users are faced with a situation where the device is stuck in a reclaim after a failed update, reset or firmware experiments. Unlike a normal restart, exiting this mode requires specific actions — otherwise the risk of damaging data or turning the phone into a “brick” increases significantly.

In this article, we will discuss all working ways to disable the recovery on Xiaomi Redmi (including the Note 12 Pro+, Redmi 10, POCO X5 and others), taking into account the features of MIUI 14 and HyperOS. Particular attention will be paid to safe methods that do not require unlocking the bootloader or using fastboot. If your smartphone is stuck on the screen with Mi Recovery or OrangeFox, follow the instructions below - but first check whether your situation is critical.

Why Xiaomi Redmi is loading into Recovery and how to fix it

The reasons for automatically loading into recovery mode on Xiaomi fall into two categories: software (software failures) and hardware (hardware problems).

• 🔄 Failed update MIUI — squash OTA or fastboot often leads to a reboot cycle in the recavery.
• 📱 Reset to factory settings – if the process is interrupted (for example, due to a discharged battery), the system can “hang” in the recovery menu.
• 🔧 Installation of custom recaveri (TWRP, OrangeFox – Incompatible version or installation error blocks normal download.
• 🔋 Critical battery discharge – if the battery is discharged to 0% during the operation with system files, the phone may “forget” the path to the main firmware.
• 🛠️ Hardware malfunctions – damage to the power connector or memory controller (for example, after a fall in the power supply).

Before you try to turn off the receptacles, determine which category your problem belongs to. If the cause is software, just follow the instructions from the following sections. If hardware, you will need to diagnose at the service center (especially for physical injuries).

⚠️ Warning: If the recovery screen displays a No command or Can't load Android system message, this indicates partition damage. /system. In this case, the usual exit from the mode will not help - you will need a flashing.

Method 1: Standard exit from the Recovery (without data loss)

If your Xiaomi Redmi fell into recovery mode by accident (like clicking a button combination), try the standard exit method.It works on 90% of devices with the original MIUI Recovery and does not require a PC connection.

Instructions:

1. In the Recovery menu, select Reboot (or Reboot) with the volume buttons.
2. Confirm the choice of the power button.
3. If after rebooting the phone again hits the recaveri, go to Method 2.

On some models (e.g. Redmi Note 11), the Reboot option may not be available.

• 🔘 Press and hold the power button for 10-15 seconds until the screen goes out.
• 🔄 After vibration release the button – the phone should restart in normal mode.

⚠️ Warning: If the Mi logo appears after a forced reboot, but then the recaverie opens again, this means that the system cannot find the boot partition.

Method 2: Reset to factory settings (if the standard output doesn't work)

If the Xiaomi Redmi is loaded in a cycle to the recavator and the usual reboot does not help, you will have to perform a hard reset. This method deletes all user data, but returns the phone to working condition, suitable for devices with MIUI Recovery and TWRP.

The following steps are taken for MIUI Recovery:

1. In the Recovery menu, select Wipe Data (or Reset) using volume buttons.
2. Confirm the choice of the power button.
3. Wait until the process is completed (it can take 5-10 minutes).
4. Select Reboot to System.

For TWRP or OrangeFox:

1. Go to the Wipe section.
2. Select Format Data (not Factory Reset!).
3. Enter yes to confirm.
4. After formatting, press Reboot System.

If the phone is still loaded into the Recovery after reset, it may mean:

• 🔴 The boot section is damaged (boot.img).
• 🔴 Incompatible firmware installed.
• 🔴 Hardware problems (e.g., damaged memory chip).

💡

If after reset, the phone asks to enter the account Mi (FRP-protection, and you do not remember the password, use the official recovery service or contact Xiaomi.

Method 3: Exit through ADB (for advanced users)

If standard methods don’t work and you have access to the Android Debug Bridge (ADB), you can try rebooting your device via the command line, which is a good way to use Xiaomi Redmi with an unlocked bootloader or USB debugging enabled.

What you need:

• 🖥️ Computer with installed ADB and Fastboot.
• 🔌 Cable USB (preferably original).
• 🔋 Battery charge of at least 50%.

Instructions:

1. Connect your phone to your PC in Recovery mode.
2. Open the command line (cmd) and enter:

adb devices

If the device is determined (the serial number will appear), do:

adb shell reboot

If the team doesn’t work, try:

adb reboot system

If ADB does not see the device, but the phone is detected in fastboot (checked by the fastboot device command), use:

fastboot reboot

⚠️ Note: Fastboot commands only work on an unlocked bootloader. If you've never unlocked a bootloader on your Xiaomi Redmi, this method won't work - go to Method 4.

Method 4: Fastboot Flashing (extreme case)

If all previous methods failed, the only reliable way to do this is to completely reflash fastboot, which restores all system partitions, but requires:

• 🖥️ Computers with Mi Flash Tool and drivers installed.
• 📁 Official firmware for your model (you can download it on the Xiaomi website).
• 🔓 Unlocked bootloader (if not previously unlocked, you will need official permission).

Step-by-step:

1. Download the firmware in.tgz format and unpack it into a folder.
2. Turn off the phone and press Volume Down + Power to log into fastboot.
3. Connect the device to your PC and start the Mi Flash Tool.
4. In the program, select a folder with firmware and press Refresh - the device must be determined.
5. Select Clean All mode and press Flash.
6. Wait for the end (10-15 minutes) and the phone will automatically restart.

Important: After flashing:

• 🔄 The phone will return to factory settings (all data will be deleted).
• 🔒 You may need to re-link your Mi Account.
• 📱 The first download can take up to 10 minutes – do not interrupt the process.

💡

Fastboot flashing is the only way to bring back the Xiaomi Redmi, which is stuck on the recover screen due to corrupted system files, but this method requires an unlocked bootloader and official firmware for your model.

Critical cases: when the Recovery does not turn off

Sometimes Xiaomi Redmi can “hang” in the recovery due to hardware problems or serious firmware errors.

If none of the methods worked and the phone is still loading into the Recovery, the following problems are likely:

• 🔧 Memory chip (eMMC or EMMC) is damaged UFS) — Requires a replacement at the service center.
• 🔌 Power controller problems – the phone may not get enough voltage for normal loading.
• 📱 Incompatible firmware – if you’ve installed custom software, it may not be suitable for your model.

In such cases, self-repair is not possible – contact an authorized Xiaomi service center or a trusted wizard.Clarify whether the warranty is maintained: if so, repairs can be free.

Prevention: how to avoid looping in the Recovery

To avoid the problem again, follow these recommendations:

• 🔄 Don't interrupt the update. MIUI — If the process is interrupted (for example, due to battery discharge), the risk of getting into the Recovery increases 5 times.
• 📱 Before resetting, charge your phone at least 50% and remove the memory card.
• 🔧 Do not install custom firmware without unlocking the bootloader and backup of the original software.
• 🔋 Keep your battery healthy – if the battery runs out quickly or your phone shuts down at 20 to 30 percent, replace it.
• 🛡️ Create backups regularly through Mi Cloud or TWRP (if established).

If you often experiment with firmware, install OrangeFox Recovery – it supports backups and recovery of individual partitions, which makes it easier to roll back to the working version of the system.

💡

To check the battery health on Xiaomi Redmi, type in the Phone app code ##4636##, then go to Battery Information. If the health status is different from Good, the battery needs to be replaced.

FAQ: Frequent questions about the recovery on Xiaomi Redmi