How to completely disable Fastboot on Xiaomi Redmi: 5 proven ways

Fastboot mode on Xiaomi Redmi smartphones is a special diagnostic mode that is activated under certain conditions: incorrect shutdown, firmware failures or forced on through a combination of buttons. Many users face a situation where the device “gets stuck” in this mode, displaying a hare in a hat-eared and the inscription FASTBOOT. Unlike Recovery mode, where you can reset or install an update, Fastboot is designed for low-level operations through the PC.

In this article, we will not only examine how to exit the Fastboot on Xiaomi Redmi without losing data, but also why it turns on spontaneously, what risks it entails, and what to do if standard methods do not work. Special attention will be paid to the Redmi Note 10/11/12, Redmi 9/9A/9C models and the flagships of the K50 series, where the logic of the Fastboot may differ. If your smartphone hangs on the Mi logo or cyclically reboots in the Fastboot, here you will find a solution.

What is Fastboot and Why is it Activated on Xiaomi Redmi?

Fastboot Mode (not to be confused with Fast Boot, a quick download feature in MIUI) is a protocol for interacting with an Android bootloader via a computer.

• 🔧 Install custom firmware (Custom) ROM)
• 🔄 Restore the stock firmware through the Mi Flash Tool
• 🔓 Unlock the bootloader (Bootloader)
• 📱 Switching separate sections (such as boot or recovery)

On Xiaomi Redmi Fastboot can be activated in the following cases:

• ⚡ Improper shutdown: if the battery is discharged to 0% or you have taken out the battery (on models with removable batteries, for example, Redmi) 4X).
• 🔄 Update failure: interrupted installation OTA-Update through Settings → The phone. → Updating the system.
• 🛠️ Manual activation: Keeping the combination Volume down + Powering for more than 10 seconds.
• 🐞 Damage to the loader: after a failed firmware or-root operations.

It's important to understand that Fastboot isn't a bug, it's a regular mode, but if it's turned on without you, it signals a firmware or hardware problem, like the Redmi Note 8 Pro, where you often have a conflict with the NFS module.

Method 1: Standard button exit (without PC)

If your Xiaomi Redmi booted into Fastboot by accident, try logging out without connecting to your computer, which works on 90% of devices as long as the boot and recovery modes are intact.

Hold the power button 15-20 seconds before vibration|If it doesn't work, press the volume up. + 10 seconds power.|The Mi Recovery menu should appear on the screen.|Choose Reboot. → Reboot to System-->

On Redmi 10/11/12 models with MIUI 13/14, additional confirmation may be required: after holding the buttons, a menu with a choice of language will appear. Use Volume Down/Up for navigation and Power for confirmation.

⚠️ Note: If the smartphone is re-entered into the Fastboot after the reboot, this indicates damage to the boot partition. In this case, you will need to flash through the Mi Flash Tool (see Method 4).

On the Redmi Note 9 Pro and later, there is a feature: if the Fastboot activated after the update, try pinching Volume up + Volume down + Power at the same time for 15 seconds.

Method 2: Disable Fastboot via Recovery Mode

If the standard reboot didn’t help, the next step is to use Recovery Mode.It lets you reset settings or clear the cache, which often solves the problem of cyclical loading in Fastboot.

To get into Recovery:

1. Turn off the phone (hold power for 20 seconds).
2. Press Volume Up + Power before the Mi logo appears.
3. Release the buttons when the Android robot menu appears.

From the Recovery menu, select:

• 🧹 Wipe Data → Wipe All Data (full reset, deletes all files!).
• 🔄 Reboot → Reboot to System (Reboot to Normal Mode).

On the Redmi K40 and K50, the Recovery menu can be in Chinese. Look for characters (reboot) or (data cleanup).

💡

If the phone still loads into the Fastboot after resetting via Recovery, try plugging it into a 30-minute charge, sometimes caused by low battery voltage, which blocks normal loading.

Method 3: Use ADB and Fastboot Commands (for advanced)

If the first two things don't work, you'll have to connect to a PC.

• 🖥️ Computer with Windows/Linux/macOS.
• 🔌 Cable USB (preferably original).
• 🛠️ Utilities. ADB Fastboot (download from the official Android website).
• 🔓 Unlocked loader (on some models).

Instructions:

1. Connect your phone in Fastboot mode to your PC.
2. Open the command line (cmd) in the folder with the platform-tools.
3. Enter the command: fastboot devices If the device is determined (the serial number will appear), continue.
4. Reboot to normal mode: fastboot reboot

If the fastboot reboot command doesn’t work, try:

fastboot oem reboot-normal

⚠️ Attention: On the Redmi Note 8/9/10 With a blocked bootloader, fastboot commands may not be executed. In this case, you will need to unlock through the Mi Unlock Tool (see the official Xiaomi website).

For models with MediaTek (for example, Redmi 9A), instead of fastboot, you may need the SP Flash Tool utility. Its use requires a separate instruction because of the risk of "bricking" the device.

Method 4: Flashing through the Mi Flash Tool (extremely)

If all previous methods failed, you can still completely reflash through the Mi Flash Tool, which is guaranteed to bring the phone back to life, but it has risks:

• 📵 Loss of all data (if there was no backup).
• 🔒 Possible blocking of Mi Account when changing the firmware region.
• ⚠️ The risk of turning the device into a “brick” if you choose the wrong firmware.

Step-by-step:

1. Download the Mi Flash Tool from the official website.
2. Select firmware for your model (e.g. Redmi Note 11 Global Stable).
3. Unpack the archive with firmware in a folder without Cyrillic characters.
4. Launch MiFlash.exe, connect your phone in Fastboot mode.
5. Press Refresh, select the device in the list.
6. Specify the path to the firmware folder and click Flash.

Once the firmware is in place, the phone will reboot to normal mode. If you request Mi Account binding, use the data from the account that was tied before the reset.

💡

Flashing through the Mi Flash Tool is the only way to bring your phone back to life if you have damaged critical partitions (boot, system or recovery).

Method 5: Hardware reset (for power users)

If the software methods didn’t help, the problem could be hardware. Some Xiaomi Redmi models (e.g. Redmi 5/6/7) have test points on the motherboard, the closure of which resets the bootloader.

Warnings:

• ⚡ Risk of damage to the board if the wrong circuit is closed.
• 🛠️ Requires disassembly of the phone (loss of warranty).
• 🔧 Need skills with a soldering iron or tweezers.

On the Redmi Note. 9S Newer test points are often absent - instead they are used EDL-cable (special) USB-cockpit+ It can be bought on AliExpress or made by yourself.

Reasons for re-entry into Fastboot and how to avoid it

If your Xiaomi Redmi is constantly returning to Fastboot, it is a signal of a system problem.

To minimize the risks:

• 🔄 Regularly update the firmware through Settings → The phone. → Updating the system.
• 🔋 Avoid battery discharge (keep the charge above 15%).
• 🛡️ Do not install custom firmware without unlocking the bootloader.
• 🔌 Use original cables and power supplies.

Redmi Note 12 with MIUI 14 adds Fastboot Auto Reboot, which attempts to automatically reboot the device from Fastboot. To turn it off, go to Settings → Additional → Special Features → Fastboot and deactivate the option.

FAQ: Frequent questions about Fastboot on Xiaomi Redmi