How to disable Fastboot on Xiaomi smartphones: 3 proven methods

Fastboot mode on Xiaomi devices is a utility tool that allows you to interact with the firmware of the smartphone at a low level.It is used to install custom firmware, unlock the bootloader or restore the system after crashes. However, many users face a situation where the phone is constantly loaded into Fastboot Mode instead of the usual system – this can be due to software errors, failed firmware or accidental activation of the mode through a combination of buttons.

In this article, we’ll break down three working ways to disable Fastboot on Xiaomi (including the Redmi, POCO and Black Shark models), and explain why a smartphone can get stuck in this mode. It’s important to understand that doing the wrong thing in Fastboot can lead to complete data loss or a “brick” device — so follow the instructions carefully.

If your Xiaomi only loads in Fastboot and doesn’t respond to standard exit methods, don’t panic: 90% of the time, the problem can be solved without going to the service center.

Why Xiaomi is loading into Fastboot: the main reasons

Before we get to the instructions, let’s understand why a smartphone can “hang” in Fastboot mode.

• 🔧 Accidental pressing of the button combination. On most Xiaomi models, Fastboot login is done by holding Volume down. + Power. If you accidentally pinch these buttons when you turn on, the system can boot into service mode.
• 📱 Failed firmware update. If the update process MIUI has been interrupted (for example, due to battery discharge), the smartphone can automatically go to Fastboot for recovery.
• 🔓 Unlock bootloader. After using the Mi Unlock Tool, the device sometimes remains in standby mode for further commands.
• 💻 Custom firmware errors. Installation of unofficial versions MIUI or other OS (for example, LineageOS) can disrupt the bootloader, which will lead to a reboot cycle in Fastboot.
• 🔋 Battery problems: If the battery is under critical discharge (usually) 10-15%), The smartphone may not load the system, but go into emergency mode.

In most cases, the problem is solved software-based without disassembling the device or replacing components, but if a physical defect (such as damage to the power button or charging controller) is the cause, repair may be necessary.

⚠️ Note: If your Xiaomi loads into Fastboot after a fall, moisture or mechanical impact, do not try to exit mode yourself. This may be a symptom of a serious hardware malfunction – contact the service center.

Method 1: Standard exit from Fastboot via buttons

The easiest method is to use a combination of hardware buttons, which works if the smartphone hit the Fastboot by accident and has no major software failures.

Instructions:

1. Hold the Power button for 10-15 seconds until the screen goes out.
2. After turning off the device, press and hold Volume Up + Power until the MI logo appears.
3. Release the buttons – the smartphone should boot in normal mode.

If this method does not work, try an alternative:

• 🔄 Connect your smartphone to the charger and repeat the steps.
• 🔋 Wait until the battery is charged to at least 20% (the charge level is displayed on the Fastboot screen).
• 📱 Try the combination Loudness down + Power (on some models, this reboots the device).

⚠️ Note: On Xiaomi models with AMOLED-screens (for example, Xiaomi 13 Pro or Redmi) K60) Long-term button retention may lead to the switching on mode EDL (If the screen turns black and the indicator turns red, release the buttons and try again.

Method 2: Exit through the Mi Flash Tool (for unlocked bootloader)

If the standard button combination does not help, and the bootloader on your Xiaomi is unlocked, you can use the official Mi Flash Tool.This method is suitable for devices that are “locked” on the Fastboot screen due to a firmware failure.

You'll need:

• 💻 Windows computer 7/10/11.
• 🔌 USB-cable (preferably original).li>
• 📥 Mi Flash Tool (last version).
• 📂 Firmware for your model (download from the official Xiaomi website).

Step-by-step:

1. Install the Mi Flash Tool and unpack the firmware archive into a folder without Cyrillic characters (e.g., C:\Xiaomi\ROM).
2. Run the Mi Flash Tool on behalf of the administrator.
3. Connect the smartphone off to your PC, then press Volume Down + Power to log into Fastboot.
4. In the program, click Select and specify the path to the folder with the firmware.
5. Select Clean All mode (Save user data if you want to save data, but it doesn’t always work).
6. Press Flash and wait until the process is complete (usually 5-10 minutes).

After successful firmware, the smartphone will automatically restart to normal mode. If the process is interrupted with an error, try again or check the integrity of the firmware files.

💡

If the Mi Flash Tool doesn’t see the device, try running it in Windows 7 Compatibility Mode. Right-click on the program shortcut → Properties → Compatibility → Run in Windows 7 Compatibility Mode.

Method 3: Unlock the bootloader through the Mi Unlock Tool

If your Xiaomi is stuck in Fastboot because of a locked bootloader (for example, after a failed attempt to install custom firmware), you will need the official Mi Unlock Tool utility.This method deletes all data on the device, so use it only as a last resort.

What needs to be done:

1. Download Mi Unlock Tool from the official website and install it on PC.
2. Sign in to your Mi Account (it should be linked to the device!).
3. Connect your smartphone in Fastboot mode to your computer.
4. Launch the Mi Unlock Tool and follow the instructions on the screen. The program will automatically unlock the bootloader.
5. After unlocking, run the device through the Mi Flash Tool (see Method 2).

Important nuances:

• ⏳ Unblocking can take up to 72 hours (if the account is new).
• 📱 On some models (e.g. Xiaomi) 12T Or the Redmi Note 11 Pro.+) tether SIM-card-to-account.
• 🔒 After unlocking the bootloader, the smartphone will be reset to factory settings.

⚠️ Note: If you bought Xiaomi hand-held, make sure the previous owner untie his Mi Account from the device. Otherwise, unlocking will be impossible without his data.

What to do if no one method helps

If all of the above methods have failed, the problem may be related to:

• 🔋 Damage to section EFI (need to be squirted through EDL).
• 💾 Hardware malfunction (for example, failure of the memory controller).
• 🔌 Power problems (faulty battery or charger).

In such cases, it is recommended that:

1. Contact the authorized Xiaomi service center (addresses can be found on the mi.com website).
2. If the warranty expires, try flashing the device through EDL using QFil or Mi Flash Pro (skills and special equipment required).
3. Check your smartphone on another charger – sometimes the problem lies in a faulty power supply.

The cost of repair in the service depends on the model and nature of the malfunction. For example, replacing the power controller with the Xiaomi Redmi Note 10 Pro will cost 1500-2500 rubles, and restoring firmware through EDL - 1000-1500 rubles.

💡

If the smartphone does not respond to any manipulations (the screen does not burn, does not warm up, is not determined by the computer), most likely, the problem is hardware.

How to avoid getting back into Fastboot

To minimize the risk of re-hanging in Fastboot mode, follow these guidelines:

• 📱 Do not accidentally press buttons when you turn your smartphone on/off. If you want to restart your device, use the program button in the menu.
• 🔄 Update. MIUI Only through official channels (Settings) → The phone. → Updating the system).
• 🔓 Do not unlock the bootloader unnecessarily – this increases the risk of crashes when updating.
• 💾 Regularly back up through Settings → System and device → Backup.
• 🔋 Keep an eye on the battery level – do not let the discharge below 10%.

If you’re actively experimenting with firmware, install the Quick Reboot app from Google Play, which allows you to reboot to Fastboot or Recovery without using hardware buttons, reducing the risk of accidentally logging into service modes.

FAQ: Frequent questions about Fastboot on Xiaomi