How to Get Out of Fastboot on Xiaomi Redmi Note 7: 5 Working Ways (2026)

Xiaomi Redmi Note 7 (codename lavender) is one of the most popular smartphones of the brand, but its owners often face an unforeseen transition to Fastboot mode. This engineering mode can appear after a failed update, resetting settings or even accidentally pressing a combination of buttons. Unlike a normal boot, in Fastboot the phone displays the Mi Bunny logo with the inscription FASTBOOT and does not respond to standard actions.

In this article, we will discuss all possible reasons for getting into the Fastboot on the Redmi Note 7, and also provide 5 proven ways to get out of this mode - from the simplest (reboot) to advanced (unlock the bootloader through the Mi Unlock Tool).

If your Redmi Note 7 is stuck in the Fastboot after firmware, updates or mechanical damage, this guide will help bring it back to life. For convenience, we have divided the methods by complexity and added video guides, screenshots and a list of necessary tools.

1 What is Fastboot and why does the Redmi Note 7 hit it?

Fastboot (not to be confused with Recovery!) is a low-level boot mode that allows you to interact with the bootloader of a smartphone via a computer, unlike Recovery Mode, where you can reset settings or flash. ZIP-Archives, Fastboot is designed to:

• 🔧 Installation of custom firmware (Custom) ROM)
• 🔓 Unlock the loader (OEM Unlock)
• 📥 Firmware official images through the Mi Flash Tool
• 🛠️ Recovery of "bricked" devices

On the Redmi Note 7, a hit in the Fastboot can be caused by:

If the Redmi Note 7 hit the Fastboot after a fall, moisture hit or a power surge, don't try to sew it yourself. EMMC-In such cases, a diagnosis is required at the service center.

Method 1: Simple reboot (without computer)

If your Redmi Note 7 booted into Fastboot for the first time and has been stable before, try the simplest method. It will work in 60% of cases, unless the cause is due to firmware damage.

Step-by-step:

1. Make sure your phone is not connected to the charger (sometimes). USB-cable locks out).
2. Press the Power button for 15-20 seconds until the screen goes out.
3. If the screen catches fire again with the Fastboot logo, press Power + Volume up for 10 seconds.
4. Release the buttons and wait 1-2 minutes (sometimes MIUI loading takes time).

⚠️ Attention, don't press power. + Loudness down for longer than 5 seconds will put your phone back in Fastboot. If after 3 attempts, the reboot didn't work, move on to the next way.

💡

If the phone vibrates when you press the buttons, but the screen is still black, it's a sign of a battery that's dead. Connect it to charging for 15 to 30 minutes, then try again.

3. Method 2: Exit through Recovery Mode

If a simple reboot doesn’t work, the next step is to try booting into Recovery Mode and reset settings, which will help if the reason for the Fastboot freeze is due to errors in user data (for example, after a failed update).

Resetting through Recovery will delete:

• 📱 All installed applications and their data
• 📷 Photos and videos (if stored in the phone's memory)
• 🔑 Google and Xiaomi accounts (re-authorization required)
• ⚙️ All personal settings (wallpaper, sounds, Wi-Fi networks)

How to Sign In to Recovery on Redmi Note 7:

1. Turn off the phone (squeeze the power for 20 seconds).
2. Press the Power + Volume combination up and hold until the Mi logo appears.
3. Release the buttons and you will see the Recovery menu (in English or Chinese).

Further action:

1. Select the Wipe Data option (or in Chinese).
2. Confirm the reset (usually a swipe or Yes press is required).
3. Once you have finished, select Reboot → Reboot to System.

⚠️ If the phone is reloaded to Fastboot after reset, it means that the system partition is damaged, in which case you will need firmware through the Mi Flash Tool (method 4).

Method 3: Unlock the bootloader through the Mi Unlock Tool

If your Redmi Note 7 didn’t previously have an unlocked bootloader and is now stuck in Fastboot after trying firmware – most likely the problem is in the locked bootloader.

What you need:

• 💻 Windows computer 7/10/11 (on macOS/Linux utility doesn't work)
• 🔌 Original. USB-cable (better from the set)
• 📱 Mi Account Account Linked to Phone
• 🔧 Mi Unlock Tool (download the latest version)

Step-by-step:

1. Install Mi Unlock Tool on your computer and run it on behalf of the administrator.
2. Sign in to the program under the same Mi Account that is linked to the phone.
3. Connect the Redmi Note 7 in Fastboot mode to your computer.
4. In the program, press Unlock and wait for the process to complete (usually takes 1-3 minutes).
5. Once unlocked, the phone will automatically restart.

💡

If the Mi Unlock Tool is running a "Couldn't unlock" error, check that the phone has been linked to your Xiaomi account for at least 72 hours. OEM Unlock.

5. Method 4: Firmware official MIUI via Mi Flash Tool

If previous methods have failed, the most reliable, but also the most risky, method is to completely run the phone through the Mi Flash Tool, which will return the Redmi Note 7 to factory status, but requires care: an error can lead to a complete blink (inoperability) of the device.

Preparation:

• 🔗 Download the official firmware for Redmi Note 7 (select the Fastboot version, not Recovery!).
• 🛠️ Install the Mi Flash Tool.
• 🔌 Connect your phone to your computer in Fastboot mode.

Firmware process:

1. Unpack the downloaded firmware archive into a folder without Cyrillic characters (e.g., C:\MIUI\lavender).
2. Open the Mi Flash Tool and press Select, then specify the path to the firmware folder.
3. At the bottom of the program, select Clean All or Clean All and Lock. + loader-lock).
4. Press Flash and wait until it is completed (usually 5-10 minutes).
5. After successful firmware, the phone will restart automatically.

⚠️ If an anti rollback error appears during firmware, it means you are trying to install an older version. MIUI, In this case, download the latest stable firmware and repeat the process.

1. Reinstall drivers manually through Device Manager (select "Qualcomm HS-USB QDLoader 9008").

2. Use another USB-port USB 2.0 on the back of the PC).

3. disable the antivirus (it can block the utility).-->

6. Method 5: Hardware reset (if nothing helps)

If the Redmi Note 7 doesn’t respond to any commands, isn’t detected by a computer, or even charged, then there’s a last chance: a hardware reset through test points, a method that requires disassembling the phone and is only suitable for advanced users.

When it might help:

• 🔋 The phone is not powered on or charged (black screen).
• 🔌 Computer doesn't see the device in Fastboot.
• 🛠️ The Mi Flash Tool is a complete error.

What you need:

• ⚡ Tweezers or thin screwdriver
• 🔌 USB-cable (requiredly original!)
• 💻 Computer with Mi Flash Tool installed

Step-by-step:

1. Turn off the phone from all power sources.
2. Remove the back cover (a mediator or plastic card will be required).
3. Disconnect the battery plume (gently tweez the connector).
4. Find test points (two metal contact pads next to the battery connector, usually signed TP).
5. Close the points with tweezers and, holding them, connect USB-computer-wire.
6. In Device Manager should appear a new device Qualcomm HS-USB QDLoader 9008.
7. Run the Mi Flash Tool and run the phone as in Method 4.

⚠️ Attention, if you're not sure about your skills, you can short-circuit your test points and you can crash your phone.

7. Frequent errors and their solutions

When you use Fastboot on Redmi Note 7, you often experience typical problems, and we've collected some of the most common bugs and ways to fix them.

💡

If after all the manipulations Redmi Note 7 is still loaded in Fastboot – check the integrity of the firmware (download files only from the official site Xiaomi) and repeat the process on another computer.

8.Prevention: How to Avoid Fastboot in the Future

To prevent Redmi Note 7 from hitting Fastboot again, follow these guidelines:

• 🔄 Don't interrupt the updates. MIUI — Wait for the full installation and reboot.
• 🔋 Do not discharge your phone to zero – this can cause file system failures.
• 🛠️ Do not install custom firmware without unlocking the bootloader.
• ⚡ Use original chargers – cheap cables can cause voltage surges.
• 📱 Regularly back up through Settings → Additionally. → Backup.

💡

If you often experiment with firmware, install TWRP Recovery – this will allow you to restore the phone from backups even after crashes.

If you plan to flash Redmi Note 7 custom firmware, be sure to:

1. Unlock the bootloader through the Mi Unlock Tool.
2. Install TWRP Recovery compatible version.
3. Create a full backup of the current firmware (Nandroid Backup).
4. Check the compatibility of the firmware with the Lavender model.

FAQ: Answers to Frequent Questions