How to disable Fastboot on Xiaomi Redmi 10: step-by-step instructions

When the screen of the Xiaomi Redmi 10 smartphone suddenly freezes, displaying the logo of a hare repairing a robot and the inscription FASTBOOT, can cause panic in the inexperienced user.This is a special low-level diagnostic mode built into the Qualcomm platform, which is designed for engineers and advanced enthusiasts. It allows you to reflash the device, unlock the bootloader or perform deep memory cleaning, but for the average phone owner, its appearance often means that the device “hanged” or was launched accidentally.

In most cases, you can get into this mode simply by holding a combination of buttons in your pocket or bag, which leads to a false alarm system, also the cause can be a software failure when updating MIUI or damage to system files. It is important to understand that the mode itself is not dangerous for the hardware of the gadget, but it can not be permanently in it — it will not perform its basic functions of calling and accessing applications.

There are several proven ways to get your phone back to normal, from simply restarting it to using specialized software on your computer. The method depends on whether the touch screen responds to touch and whether the hardware control button works. In this article, we will detail all the algorithms that will help you solve the problem yourself without going to the service center.

The reasons for the appearance of the Fastboot mode on Redmi 10

Understanding the cause of the problem is the first step to successfully fixing it. On Xiaomi smartphones, the fast-boot mode is activated while the volume-down button and the power button are pressed while the device is turned on. Often this happens by accident when the phone is lying in a tight case or pocket with keys. The mechanical pressure on the side edge simulates the command to log into the engineering menu.

However, if you haven't touched the buttons and the screen still catches fire with a characteristic image, you should think about software errors. This may be due to an operating system update that failed when the process of writing new data is interrupted or error-free, in which case the bootloader can't find the correct files to start the OS and goes into emergency command waiting mode.

Also, corrupted system files can be caused by unofficial builds or modifications. If you have previously tried root rights or installed custom recavators, the risk of encountering a cyclic input to the Fastboot increases. In rare cases, the culprit is sticking a physical volume button due to moisture or dust.

• 🔘 Accidental pressing of a combination of buttons in a pocket or cover.
• 💾 Failure to update firmware or interrupt the installation process.
• 🔧 Damage to the system partition of the loader after modifications.
• 💧 Mechanical sticking of the volume reduction button.

💡

If the volume button feels “cool” or doesn’t issue a clear click, the problem may be hardware – in this case, software techniques may not help without repair.

Basic method of exit through forced reset

The easiest and safest way to exit the Fastboot menu on Redmi 10 is to perform a forced reboot.This method doesn't require a computer connection or additional software. It works in the vast majority of cases when the system isn't blocked by serious bugs. You'll need physical access to the smartphone control buttons.

First, you need to press the power button. Hold it continuously for 10-15 seconds. The screen can go out, the device vibrates, and the Mi or Redmi logo appears. If the phone comes back to the hare after the logo appears, then the volume button is still pinched or flushed. In this case, try repeating the procedure, but make sure that the finger does not press on the lower part of the side face.

Sometimes the standard power retention doesn't work the first time, so try a combination of this: press both the power button and the volume button at the same time. 15-20 This method emulates the battery extraction and allows you to discharge static electricity that could have caused the power controller to fail.

If after the restart, the system starts to boot, but the process stops on the logo, OS files may be allowed. However, if the phone turned on normally, the problem was a one-time and caused by accidental pressing.

Using ADB to exit Fastboot

If the physical buttons on Redmi 10 don’t respond or crash, the only way out is to use a debugging software interface. USB-The method involves sending a special command directly to the loader of the device.

First of all, you need to install the ADB and Fastboot drivers on your computer. They're part of Google's SDK Tools platform. Once you install the drivers and connect the smartphone with a cable to your PC, open the command line in the utility folder. Make sure the computer sees the device -- this will be indicated by the display of the serial number in the list of connected devices.

fastboot devices

If you see the device code in response to the command above, the connection is established. To exit the mode, you need to enter the following command:

fastboot reboot

After pressing Enter, the smartphone should immediately restart.If the command does not execute and there is a waiting for device error, check the cable or try another one. USB-Sometimes you need to press the volume button up or down while connecting the cable so that the computer recognizes the device in bootloader mode.

Resetting settings via Recovery Mode

In cases where a normal reboot results in a reappearance of the hare and ADB commands are not helping, a reset of user data may be required.Recovery mode allows for deep memory cleanup by removing potentially corrupt files that interfere with normal booting, this step will result in a complete loss of photos, contacts and apps.

To get into the recovery menu, turn off the phone (if possible via ADB fastboot reboot poweroff command or long power retention). Then press both the power button and the volume button. Hold them until the logo appears, then release power, continuing to keep the volume up until the main Recovery menu appears.

Navigation in this menu is done with volume buttons (up-down), and the choice is confirmed by the power button. You need to find the Wipe Data item, then select Wipe All Data and confirm the action. After the cleaning process is complete, select Reboot -> Reboot to System.

💡

Recovery reset is a radical measure that eliminates software conflicts but requires a backup of data.

Firmware of the device through the Mi Flash Tool