Bypassing Xiaomi activation after reset: working methods for 2026

Reset settings on Xiaomi, Redmi or smartphones POCO It often turns into a headache: the device requires you to enter the Mi-account data to which it was previously associated. If you bought a used phone, forgot your account password or faced with a lock after firmware - this article will help you understand the legal ways to bypass activation without losing functionality.

It is important to understand that bypassing the Mi-account protection violates the terms of Xiaomi’s user agreement and may result in a blocking. IMEI We consider methods solely to restore access to our own device when the original account is unavailable. For phones with the status of "lost / stolen" these methods do not work - such devices are blocked at the server level Xiaomi.

V 2026 The company tightened the protection: new models on HyperOS (for example, Xiaomi) 14 or Redmi Note 13 Pro+) They use hardware encryption to make it almost impossible to bypass activation without an official unlocker. MIUI 12-14 and old flagships (Mi) 11, Redmi K50) Working solutions remain.

Why Xiaomi is blocking the phone after a reset?

The Mi-account binding system (or Xiaomi Account) was introduced in 2016 as a measure against theft.After being reset via Recovery or Settings → The reset phone requests the account that was last logged in to the device:

• 📱 All smartphones Xiaomi, Redmi, POCO Black Shark (except for models for the Chinese market without global firmware)
• 🔄 Devices after hardware reset (via Fastboot or EDL)
• 🔓 Phones with Find My Device enabled (similar to Google's Find My Device)

The locking works even if:

• ✅ You reset your phone through the settings menu (not Recovery)
• ✅ Remove Xiaomi account before reset, but did not untie the device in Settings → Mi Account → Devices
• ✅ Buying a phone with your hands and the seller didn’t remove his tether

⚠️ Note: If a used phone is purchased by a seller who refuses to disconnect the device from his account, this is a reason to doubt the legality of the transaction.

From the technical side, the blocking is implemented through:

1. Hardware partition encryption /data key attached to the Mi-account.
2. Checking certificates when you first connect to the Internet (even if the reset is offline).
3. Blocking the bootloader (Bootloader) on new models, which prevents the installation of custom firmware.

Official ways to unlock (without bypass)

Before resorting to "grey" methods, check the official options:

If none of the official methods are right, move on to alternative methods, but remember, any unofficial bypass of activation can lead to:

• 🚫 Blocking IMEI (The phone will be a "brick" for calls)
• 🔄 Automatic reset after firmware update
• 📵 Loss of access to Xiaomi services (cloud, themes, updates)

Method 1: Bypassing Fastboot modes and EDL (technically prepared)

This method is suitable for devices on MIUI 12-14 You will need a computer with Qualcomm or MediaTek drivers installed (depending on the phone’s processor) and Mi Flash Tool or QFil programs.

Step-by-step:

1. Find out your phone’s processor model (like Snapdragon 8 Gen 2 or Helio). G99). This can be done through settings. → The phone. → Version of the kernel (if the phone is turned on somehow).
2. Download the firmware for your model from en.miui.com (select the Fastboot version).
3. Install drivers: For Qualcomm: QDLoader HS-USB Driver For MediaTek: MTK USB Driver
4. Put the phone in mode. EDL: Turn off the device. Press the volume up. + Volume down and plug into PC. Qualcomm should appear in Device Manager HS-USB QDLoader 9008.

Mi Flash Tool

Clean All

⚠️ Note: On new phones (Xiaomi) 13/14, Redmi Note 12 newer) regime EDL It's locked without authorization, and trying to flash that device will lead to a hard-brick).

If the firmware is successful, the phone will boot without asking for an account.

• 📱 IMEI Resetting may be required (recovery through Engineer Mode).
• 🔄 After updating, OTA The lock may return.
• 📵 Some functions (e.g. H)FC or IR-blaster) may not work properly.

Method 2: Use of custom firmware (TWRP + Magisk)

For devices with unlocked bootloader (Bootloader Unlocked), you can install custom recovery (TWRP) And the firmware that removes the account request, which works on most Xiaomi models until 2022.

What will be required:

• 📱 Phone with unlocked bootloader (checked by the command fastboot oem device-info - look for the line Unlocked: true).
• 💻 Computer with ADB and Fastboot.
• 🔗 Firmware TWRP For your model (download from twrp.me).
• 📦 Modified firmware (e.g. Xiaomi.eu or Pixel Experience).

Instructions:

1. Install TWRP via Fastboot: fastboot flash recovery twrp.img fastboot boot twrp.img
2. In TWRP, run Wipe → Format Data (this will remove encryption).
3. Install a modified firmware (e.g. Xiaomi.eu without linking to your account).
4. Squeeze Magisk for root rights (optional, but will help you bypass future blockages).

Advantages of the method:

• ✅ Full control of the device.
• ✅ No binding to Mi-account.
• ✅ The ability to install Google services (if they were not available).

Disadvantages:

• ❌ Loss of guarantee.
• ❌ Risk of "brika" in error.
• ❌ Some functions (such as Widevine) L1 for Netflix HD) may not work.

Method 3: Bypassing service codes (for older models)

On some Xiaomi devices until 2019 (e.g. Redmi Note 5, Mi) A1, Mi 8) you can bypass activation through the engineering menu. This method does not require a computer, but it does not work on all firmware.

Instructions:

1. On the activation screen, type the code: ##3646633## This will open the Engineer Mode (engineering menu).
2. Go to Connectivity → CDMA → CDMA Debug Info.
3. Enter the command: AT+EGMR=1,7,"XIAOMI" and press Send.
4. Restart the phone. Once it's on, the lock should disappear.

If this code doesn’t work, try alternatives:

• ##7678## - Reset your network settings.
• #4636## - Test menu (sometimes allows you to skip activation)

⚠️ Note: On newer models (Redmi Note 10 and later), the engineering menu is blocked to change security settings. Attempting to enter codes can lead to a hard reset with loss of all data.

If the service codes don’t work, move on to the next method.

Method 4: Bypassing the change of the firmware region (MIUI Global → China)

Some users successfully bypass activation by flashing the Chinese version MIUI This method works because Chinese firmware does not have a binding to Mi-account (which uses a different authorization mechanism).

What do you need?

• 📱 Phone with unlocked loader.
• 💻 Computer with Mi Flash Tool.
• 🔗 Firmware MIUI China Stable for your model (download from xiaomifirmwareupdater.com).

Step-by-step:

1. Download Chinese firmware (for example, ingres_fastboot.zip For the Redmi Note 11).
2. Unpack the archive in a folder without Cyrillic characters.
3. Transfer your phone to Fastboot (clip Volume Down + Power).
4. In the Mi Flash Tool, select the firmware folder and press Refresh (your device should appear).
5. Press Clean All and wait for the firmware to finish.

After the firmware:

• 📱 The phone will be downloaded in Chinese.
• 🔄 You will need to manually install Google services (download Google Installer from APKPure).
• 📵 Some features (like Google Pay) may not work due to lack of certification.

💡

If after the Chinese firmware MIUI phone asks for a Xiaomi account for the Chinese region, create a new account on account.xiaomi.com by selecting the region" ().

Method 5: Hardware bypass (chip replacement) EMMS)

This is the last resort that you use when the software doesn't work. EMMC (internal memory, which stores the link to the account, works at 100%, but has serious shortcomings:

• 💰 Cost: 3,000 to 10,000 ₽ (model-wise).
• 🛠️ Requires a soldering station and experience with microelectronics.
• 🔄 All data will be irretrievably lost.
• 🚫 Guarantee voided.

How the process works:

1. The motherboard is removed from the phone.
2. With help. BGA-station is removed EMMC or UFS.
3. A new (or used) chip with a clean firmware is installed.
4. A stitching firmware is being stitched through EDL.

This method is often used by service centers to unlock phones with lost IMEI Or a broken firmware. But there are risks:

• 🔥 Overheating of the board during soldering can disable other components.
• 📡 After replacement EMMC may require restoration IMEI and MAC-wifi addresses.
• 🛂 Some models (Xiaomi) 12T, Redmi K60) have memory replacement protection and can be blocked again.

⚠️ Warning: If you choose to use this method, look for a service with good reviews. Unqualified soldering can lead to short circuit and complete loss of the device.

What do you do if nothing helps?

If all of these methods don’t work, you have a few options:

1. Selling your phone for parts. 💰 Price: 20-50% market value. 📱 Buyers: service centers or repair masters.
2. Use your phone without activation. 📞 Calls and SMS will work. 🌐 Wi-Fi and mobile Internet – only if no authorization is required. ❌ No access to app installation.

Turn to the "gray" unlockers.

• 💳 Cost: 500 to 3000 ₽.
• 🔗 Risks: fraud, blocking IMEI, spyware.

If the phone is locked because of default (for example, bought in installments from the operator), bypassing activation will not help - the device will be locked at the operator level, in which case you need to contact the lender with documents.

💡

New Xiaomi models on the new models (2023-2026 Bypassing activation is virtually impossible without an official unlocker. If your phone is on HyperOS, consider buying a new device or restoring access to the original Mi-account.

FAQ: Frequent questions about circumventing Xiaomi activation