How to reset Xiaomi Redmi 6 to factory settings: 3 proven ways

Why would you need to reset Redmi 6 to factory settings?

Resetting the Xiaomi Redmi 6 to factory settings is a radical but sometimes the only solution to a number of problems. This budget smartphone, released in 2018, is still in active use, but its performance may decline over the years. Factory reset helps in cases where the phone starts to brake for no apparent reason, applications spontaneously close or the device overheats even with minimal load.

Another common reason is to prepare for sale: Before transferring Redmi 6 to the new owner, you need to delete all personal data: photos, messages, passwords from accounts and banking applications. Regular deletion of files does not guarantee complete cleanup - they can be restored with special programs. Only a complete reset through Wipe Data in Recovery Mode guarantees permanent erasure of information.

Finally, a reset may be required after a failed MIUI update or custom firmware installation when the system is malfunctioning. Unlike new Xiaomi models, the Redmi 6 does not have a rollback feature, so reset remains the only way to regain stability.

Method 1: Reset via phone settings (without losing data on the memory card)

The easiest and safest method is to use a built-in reset menu, which is suitable if the phone turns on, reacts to touch and you have access to the Settings menu. SD-The card will remain intact and the internal memory will be cleaned.

Instructions:

• 📱 Open the Settings app (cog icon on the home screen).
• 🔧 Go to the section Additional → Recovery and Reset (in some versions) MIUI The path may be different: → Advanced settings → Recovery and discharge).
• 🔄 Select Resetting (or Resetting to factory settings).
• 🔐 The system will request the input of a pattern lock or PIN-code (if it is installed).
• ⚠️ Confirm the action by clicking Delete Everything or Reset the phone.

⚠️ Note: If Redmi 6 activates the function of Protecting Mi device (link to Xiaomi account), after reset, you will need to enter the username and password from this account"!

It takes 5-10 minutes, and when it's done, it automatically reboots and suggests that you configure it as new, which is a good approach for 90 percent of the time, but if the phone doesn't turn on or is stuck on the MI logo, you'll have to use Recovery Mode.

Backup your contacts (via Settings → Google → Backup)

Copy photos and videos to a computer or cloud

Remember the username/password from the Xiaomi account (if tied)

Make sure that the battery charge is > 50%

Get out. SIM-map SD-map (optional)

-->

Method 2: Hard Reset via Recovery Mode (if the phone doesn't turn on)

If Redmi 6 is stuck on the screensaver, reboots cyclically or does not respond to touch, only hardware reset through recovery mode will help. SD-Cards (unless they have been encrypted).

Step-by-step:

1. Turn off the phone with a long press on the power button (10-15 seconds). If it does not respond, wait for the battery to drain completely.
2. Press the button combination: Power button + Volume button Hold them simultaneously for 10-15 seconds until the Mi logo and Recovery menu appear.
3. Select a language (usually English or Chinese) and go to the Wipe Data (or Clear Data) menu.
4. Confirm the reset by selecting Wipe All Data → Confirm.
5. Wait until it is completed (the process will take 3-7 minutes) and restart your phone via Reboot.

In the Recovery menu on Redmi 6, the volume buttons (Up/Down for navigation) and the power button (Select) are controlled. If the screen does not respond to touch, this is normal, since the sensor is turned off in recovery mode.

⚠️ Attention: On some firmware MIUI After resetting via Recovery, you may need to re-activate the device over the Internet. If the phone is not connected to Wi-Fi, use the mobile network (insert the mobile network). SIM-card).

Method 3: Fastboot Reset (for power users)

This method is suitable if the first two methods did not work, for example, because of a damaged firmware or blocked Recovery. To reset via Fastboot, you will need a computer with Xiaomi drivers installed and the Mi Flash Tool or ADB program.

Instructions:

1. Download and install the Mi Flash Tool (the official Xiaomi website).
2. Turn off Redmi 6 and put it into Fastboot mode by holding: Power button + Volume down button The screen will show an image of a hare in a hat-eared (Fastboot logo).
3. Connect your phone to your computer through USB-cable.
4. Open the command line (CMD) and type: fastboot devices If the device is determined (its serial number will appear), execute the command full reset: fastboot erase userdata fastboot erase cache fastboot reboot

This method deletes all user data, including MIUI settings, but saves system files. If the phone still doesn't work after the reset, you may need to completely flash through the Mi Flash Tool.

Yeah, because of the brakes.

Yeah, before the sale.

No, I never had to.

I tried it, but it didn't work out.

-->

What to do after a reset: initial setup and data recovery

After a successful reset, Redmi 6 will launch as a new device, and you will have to go through the initial setup, which includes:

• 🌍 Language and region selection (it is recommended to specify Russia or Ukraine for the correct operation of Google services).
• 📶 Connect to Wi-Fi or mobile network (required to activate your Xiaomi account).
• 🔑 Sign in to your Mi Account (if the phone was tied to it before the reset).
• 📱 Recovery from backup (if it was created via Mi Cloud or Google Drive).

If you backed up through Mi Account, you can restore data under Settings → Mi → Mi Cloud → Restore. For Google backups, go to Settings → System → Recovery and Reset → Data Recovery.

Tip: After reset, it is recommended to immediately update MIUI to the latest version. To do this, go to Settings → About Phone → System Update. This will help avoid bugs and improve performance.

💡

If Redmi 6 is slower after reset, try turning off the interface animation. To do this, activate Developer Mode (7 times click on the MIUI version in About Phone), then in Settings → Additional → For developers, set Windows Animation = Off, Transition Animation = Off and Duration of Animation = Off.

Table: Comparison of reset methods for Xiaomi Redmi 6

Frequent Mistakes and How to Avoid Them

Even when following the instructions, users often encounter problems, and here are the most common mistakes and ways to solve them:

• 🔋 "The phone turned off during the reset" → Connect the charger and wait for charging to at least 30%. interruption of the process can damage system files.
• 🔒 "After the reset, the Mi Account requires, but I don't remember it" → Restore your password through account.xiaomi.com. If your account is not yours (phone purchased by hand), contact the previous owner.
• 🔄 "Phone's fixated on logo MI post-discharge" → Repeat reset via Recovery or flash the device through Fastboot.

If none of the methods worked, perhaps the problem lies in the hardware: damaged memory (eMMC), the battery is bloated and presses on the motherboard, or the contacts of the screen plume have gone away. In such cases, self-repair is not recommended – contact the authorized Xiaomi service center.

💡

Always check the battery and backup before reset, and even if the phone is running on the edge, 10% of the charge may not be enough to complete the process, leading to serious failures.

FAQ: Answers to Frequent Questions