How to set up a Xiaomi device after resetting to factory settings: the full guide

Factory resets on Xiaomi devices are a radical but effective way to get your gadget back to its previous performance, get rid of viruses or prepare it for sale. However, after this procedure, many people face problems from being unable to log into your Mi Account to losing important data. This article will help avoid typical mistakes and set up Xiaomi (whether it is a smartphone, TV or tablet) from scratch – quickly, safely and with the latest updates in 2026.

We will not only discuss the basic steps (login, network setup), but also the nuances that are rarely written about: how to restore backups without loss, why the device can “brake” after a reset, and what to do if the system requires an old version of firmware.

If you dropped Redmi Note 12, Mi 11 Ultra, Xiaomi TV A2 And the rule of thumb is, don't rush through the steps, even little things like choosing a region or setting up syncs can affect how the gadget works in the future.

1. Preparation for setting up: what to do before turning on the device

Before you press the power button after reset, do a few critical actions that will save time and prevent typical problems, such as blocking due to a link to an old Mi Account.

First, check if you have access to an email or phone number linked to the Mi Account. Without it, you can't unlock a device if it was tied to an account before the reset. Second, back up important data (photos, contacts, messages) if it was stored on the device before the reset. Even if you plan to restore it from the cloud, local copy will not hurt.

• 📱 For smartphones/tablets: Make sure that SIM-The card is active (required for SMS-If the device was blocked through Find Device, the reset did not remove the lock - you will need to unlock through the official Xiaomi website.
• 📺 For Mi TVs, TV: Connect an Ethernet cable or check the stability of Wi-Fi. After reset, the TV may freeze during the upgrade phase if the connection is interrupted.
• 🔋 Charging: The device must be charged at least 50%. If the battery runs out during setup, this can cause firmware failure (especially for older models like the Redmi). 4X).
• 📁 Backups: If you have done backup through Settings → Additionally. → Backup, make sure the copy file is saved to your PC or the Mi Cloud.

⚠️ Note: If you reset a device that was tied to your Mi Account but don’t remember the login details, don’t try to guess the password.After 5 failed attempts, Xiaomi will block the option to enter for 24 hours. In this case, you will need to unlock through support with proof of ownership (check, box with the help of the user). IMEI).

2. First launch: account login and region selection

Once reset, the device will start in the initial setup mode, where many people make mistakes that are difficult to fix.

1. Language and region choice: State Russia (or your real region), which will determine the availability of Google services, the Mi Themes store, and the set of pre-installed apps, for example, if you choose China, you will not be able to install Google Play without additional manipulation.

2 Network connection. Use a stable Wi-Fi connection. If the device can't see the network, check if the Wi-Fi module is enabled in the router settings (sometimes after a reset, Xiaomi doesn't support outdated standards like the one that is not connected to the network). 802.11b).

3. Sign in to Mi Account. There are two possible scenarios:

If the device was linked to the account before the reset, the system will require you to enter a login and password. You can not ignore this step - without login, the device will remain locked (Factory Reset Protection function).

If you don't have an account attached, you can skip this step or create a new account, but without Mi Account, you won't be able to use cloud storage, data sync, and some features like Mi Share.

4. Update firmware. In the initial setup phase, the system will suggest updating the software. Don't miss this step - fresh firmware closes vulnerabilities and improves compatibility with applications. If the update is “hanging” by 0%, check your internet connection or try to update later via Settings. → System system → Update of the PO.

💡

If the device requires an old firmware version (for example, after a downgrade), download it from the official Xiaomi website and install it through Recovery Mode (clip Volume Up). + Power on-set).

3. Data recovery: backups and synchronization

Once you log in, you can start to recover data, and it's important to understand what data you can get back and what data you can't.

Recovery methods:

• 📱 Mi Cloud: If sync, photos, contacts, notes and SMS They will automatically recover when you log in. → Mi Account → Mi Cloud.
• 💾 Local backup: If you created a backup through Settings → Additionally. → Backup, connect the device to your PC and transfer the.mbk file to the root folder of internal memory.
• 🔄 Google Account: Contacts, calendar and some app settings can be restored through Google. → Accounts and enable synchronization.
• ⚠️ What won't recover: Wi-Fi passwords, call history, customization of individual apps (like WhatsApp or banking programs) that will have to be reconfigured.

If you are using a local backup, consider two nuances:

- The backup file must be created on the same device or on a model with the same firmware. For example, a backup with a Redmi Note 10 will not recover from the backup. POCO X3.

- Recovery will take time - don't interrupt the process, even if the screen is out.

Compatibility of the firmware version with backup|Availability of free space (minimum 2 GB)|Stable Internet connection (for cloud recovery)|Shutdown VPN (It can block access to the Mi Cloud)

-->

⚠️ Note: If you restore data from a backup created on a root-righted device, this can cause system failures, in which case it is better to transfer files manually (photos, music) and configure applications again.

4.Security setting: protection against re-blocking

After a reset, many users experience a device lockdown through Find Device or Mi Account. To avoid this, follow the following steps:

1. Untie old devices from your Mi Account. Go to account.xiaomi.com, go to Device Management, and remove any gadgets you no longer use, which will prevent conflicts when re-associated.

2. Set up two-factor authentication. Enable it in your Mi Account settings (Security) → This will protect your account from being hacked if someone finds out the password.

3. Check the Find Device settings. Go to Settings → PapaSSWORD & SECURITY → Find Device and make sure the feature is enabled, so you can lock or find the device in case of theft, but if you sell the gadget, be sure to turn off this feature and log out of your Mi Account.

4. Set the screen lock. Even if you don't plan to store sensitive information on the device, it's simple. PIN-A code or a pattern lock will protect you from accidental access. Avoid simple combinations like 1234 or 0000, which are easy to pick up.

5. Optimization of work: performance and battery settings

Once reset, the device may be slower than before, and this is due to background tuning, but sometimes the wrong settings are the cause.

For smartphones and tablets:

• 🔋 Adaptive Charging: Include it in Settings → Battery → Battery settings.This will extend battery life by limiting charge to 80% at night.
• ⚡ Performance mode: C Settings → Special facilities → Select Balanced (for everyday tasks) or High Performance (for gaming).
• 🗑️ Cache Clearing: After Data Recovery, Clear App Cache in Settings → Warehouse → Clear the cache, it'll make room and speed up the work.

For Mi TVs:

• 🎮 Game Mode: Enable it in Settings → Display and sound → Game mode if you plug in a console or PC, it will reduce the input delay.

If the device still "brakes", check the list of running applications in Settings → Annexes → Some programs (like Facebook or TikTok) consume a lot of resources in the background.

💡

New Xiaomi devices (2023-2026) have default mode enabled MIUI Optimization, which limits the background activity of applications. If you want full multitasking (for example, for a navigator), disable it in Settings → The phone. → Version. MIUI (Tap 7 times according to version, then go to Additional settings → MIUI Optimization).

6. Installation of applications and configuration of services

Once you have set up the basics, you can start installing applications, and it's important not to overload the system with unnecessary software that will waste resources.

What to install first:

• 🛡️ Security: Google Play Protect (built into the Play Market) and antivirus (such as Dr.Web or Kaspersky).

What to avoid:

• ❌ Installation APK-Files from unverified sources (virus risk).
• ❌ Using cleaners like Clean Master – they often delete useful system files.
• ❌ Simultaneous installation of several antiviruses (they conflict with each other).

For Mi TVs, TV recommend:

• 📺 Kinopoisk or IVI film-watch.
• 🎮 Steam Link or Moonlight for streaming PC games.
• 📱 Send Files to TV transferring files from the phone.

After installing the apps, set them up for automatic update in Google Play (Settings) → Auto-update applications. This eliminates the need to monitor the release of new versions manually.

7. Solving typical problems after discharge

Even if you set it up properly after resetting, you can have errors, and let's look at the most common ones and how to fix them.

If the device does not see after the reset SIM-map, perform the following actions:

1. Reset the device.
2. Check if it is inserted correctly SIM-map (on some models Xiaomi tray has a non-standard location).
3. Update your firmware to the latest version – sometimes the error is related to an outdated modem.
4. If nothing helps, reset your network settings in Settings. → SIM-maps and mobile networks → Resetting network settings.

For Mi TVs, TV The typical problem is the lack of sound through HDMI. That's how it works:

1. Go to Settings → Sound → Output sound.
2. Choose. HDMI source.
3. If there is a sound but with a delay, turn off Dolby processing.

⚠️ Note: If the screen says “This device is locked” after the reset (even if you entered the correct Mi Account password), it means that the device was blocked by the previous owner through Find Device. In this case, unlocking is only possible through official Xiaomi support with proof of purchase.

8 Additional settings for experienced users

If you are not a beginner and want to squeeze the maximum out of the device, pay attention to these features:

For smartphones:

• 🔧 Developer Mode: Activated by taps according to Version MIUI In the settings, lets you turn on the debugging. USB, Change the interface animation and limit background processes.
• 📡 Double Appendices: C Settings → Annexes → Dual apps can be cloned messengers (for example, have two WhatsApp on the same device).
• 🎨 Topics and fonts: In Settings → Display. → Themes can be downloaded alternative interface designs (including dark theme for the AMOLED-screen).

For TVs:

• 🖥️ PC Mode: In Settings → Display and sound → Select PC to use TV as monitor.
• 🎚️ Color calibration: In Settings → Display and sound → You can choose the Cinema profile for a more natural picture.
• 🔌 Office USB: Connect the mouse or keyboard through USB-OTG easy-to-use.

For owners of devices with MIUI 14/15 Super Wallpaper is available, which is a dynamic screensaver that responds to the time of day. To turn them on, go to Settings. → Wallpaper. → Super wallpaper and choose your favorite option. note that they consume an extra battery (nearby) 5–10% day-to-day).

If you plan to use the device for gaming, install Game Turbo from the Mi App Store.This app optimizes performance, blocks notifications, and records gameplay.

💡

On Xiaomi devices with Snapdragon processors (for example, Redmi Note 12 Pro)+) You can unlock the bootloader to install custom firmware, but this cancels the warranty and can lead to a lock if you violate Xiaomi's rules.

FAQ: Frequent Questions After Xiaomi Reset