Xiaomi stuck on the logo when turned on: 7 working ways to restore

Did you turn on a Xiaomi smartphone, and on the screen is only the Mi or Redmi logo that doesn't disappear in minutes? Or does the device reboot cyclically without reaching the desktop? This problem is familiar to many owners of Xiaomi, POCO and Redmi devices - from the budget Redmi Note 10 to the flagship Xiaomi 13 Ultra. The reasons for the freeze can be different from a failure after an update to hardware malfunctions.

Take your phone to the service center, and 80 percent of the time, you can solve the problem yourself without a soldering iron or special skills, and the key is to diagnose the cause and choose the right recovery method. In this article, we will look at all the current methods (including the hidden features of the Mi Flash Tool and Fastboot/EDL modes) that work on models from 2020 to 2026.

Important: If the phone doesn’t respond to power buttons and doesn’t charge (even after a long connection to the RAM), the problem may be in the hardware, such as the power controller, in which case repairs are necessary.

Before you start your recovery, answer two questions:

1. Does the phone react to charging (lights up, vibrates)?
2. Have you installed custom firmware or rooted the device?

The answers will help you choose the best method.

1. Reasons Xiaomi gets stuck on the logo

Bootloop is not a diagnosis, it's a symptom. To choose the right solution, you need to understand what triggered it. Here are the main reasons for Xiaomi smartphones:

• 🔄 Failed software update - interrupted firmware through OTA or migrating to a new version MIUI (for example, 13 on 14). Frequently found on the Redmi Note 11/12 and POCO X4 Pro.
• 📱 Conflict after resetting settings – if you did Wipe Data in Recovery but didn’t clear the cache or Dalvik.
• 🛠️ Incorrect system interference: removing system applications, rooting through Magisk, or installing unofficial cores.
• 🔋 Hardware problems: damaged memory (eMMC) UFS), oxidized battery contacts or a faulty power controller.
• 🦠 Viruses or corrupted files in the section /system, For example, after connecting to an infected PC.

On Xiaomi models 2022-2026 (for example, Redmi Note 12 Pro+ or Xiaomi 13T) software failures are most often to blame, since hardware defects usually manifest themselves differently (for example, the phone does not turn on at all), but on older devices (until 2020) there is a high probability of memory wear.

How do you determine the cause?

⚠️ Warning: If the phone vibrates 1 time when connected to charging, but does not turn on - this is a sign of short circuit on the board!

2.The simplest methods: reboot and charge

Before you start complex manipulations, try basic techniques that help 30% of the time, especially if the freeze is caused by a temporary failure.

Method 1: Forced resetting

On most Xiaomi smartphones, it is done as follows:

1. Press the power button for 10-15 seconds.
2. If it doesn’t work, try the Power + Volume combination up (hold for 20-30 seconds).
3. Some models (e.g. POCO F4) have power + volume down.

Method 2: Charging in the off state

If the phone is dead, it may not turn on even after you've connected to the charger.

• 🔌 Connect the original RAM and leave it for 1-2 hours (even if the indicator does not burn).
• 🔋 Use a charger with Quick Charge 3.0 support+ (For example, from the Redmi Note 11 Pro).
• 🔄 If there is no change after 2 hours, try another charger or cable.

Method 3: Connecting to a PC

Sometimes the phone wakes up when you connect to the computer:

1. Connect your smartphone to your PC via USB.
2. Keep the power + volume up 10-15 seconds.
3. If the PC makes the sound of the device connection, the phone is alive, and you can try the firmware.

3. Log in Recovery Mode and reset settings

If the phone responds to buttons but doesn't load beyond the logo, try resetting via Recovery.This method works on all Xiaomi models, including the Redmi 10C, POCO X5 and Mi 11 Lite.

How to log in to Recovery:

1. Turn off your phone (if necessary).
2. Press Power + Volume up and hold until the Mi Recovery logo appears.
3. Some models (e.g. Redmi Note 9) use the combination Power + Volume up + Loud down.

In the Recovery menu, control is carried out by volume buttons (up/down - moving, power - choosing).

What to do in Recovery:

• 🔄 Cache Clearing: Choose Wipe & Reset → Wipe Cache. It's secure and doesn't delete your data.
• 🧹 Reset to factory settings: Wipe & Reset → Wipe All Data (delete all files, photos, applications!).
• 📥 Install the update: If you have a firmware file on SD-map, select Install update.zip to System.

If Recovery does not open:

⚠️ Note: On some firmware (for example, custom) the Recovery menu can be replaced by TWRP. In this case, select the Wipe. → Advanced Wipe and tag Dalvik, Cache, Data.

4. Firmware via Fastboot (for power users)

If resetting through Recovery doesn’t work, you’ll have to manually refashion the phone.The Fastboot method is suitable for most Xiaomi models, but requires a computer and minimal technical skills.

What you need:

• 🖥️ Windows computer 10/11 (on Mac/Linux There may be problems with drivers).
• 🔌 Original. USB-cable (better from the set).
• 📁 Stock firmware for your model (download only from the official Xiaomi website).
• 🛠️ Mi Flash Tool (last version).

Step-by-step:

1. Install drivers: Download and install Xiaomi drivers. Connect your phone in Fastboot mode (press Power + Volume Down). In Device Manager, check that the phone is defined as Android Bootloader Interface.
2. Prepare the firmware: Unpack the downloaded firmware archive into the C:\miui folder (the Cyrillic-free path!). Launch the Mi Flash Tool on behalf of the administrator.
3. Sweep your phone: In Mi Flash, press Select and specify the firmware folder. Select Clean All or Clean All and Lock (if you want to lock the bootloader). Press Flash and wait until it's finished (usually 5-10 minutes).

Important nuances:

• 🔐 If the bootloader is locked, it must be officially unlocked (it takes 7-15 days).
• ⚡ On models with Qualcomm Snapdragon, for example, POCO F5) The firmware is faster than MediaTek (Redmi). 10A).
• 🚫 Don’t turn off your phone while you’re firmware – it can “brick” it forever!

💡

If the Mi Flash Tool is not allowed, download the older version (for example, 2018) or use an alternative tool – XiaoMiTool V2.

5. Firmware through EDL (Emergency Mode)

If the phone doesn’t respond to any button combinations and isn’t detected in Fastboot, the last chance is the firmware via Emergency Download Mode (EDL), which is available on all Xiaomi smartphones on Qualcomm chips (e.g. Redmi Note 11 Pro, POCO X3 Pro).

How to log into EDL:

There are two ways:

1. Hardware: Turn off the phone. Press Volume up. + Loud down and plug in. USB-Hold the buttons for 10-15 seconds until the phone is identified as Qualcomm. HS-USB QDLoader 9008.

Software (via ADB):

adb reboot edl

It only works if USB debugging is enabled.

Firmware in EDL:

You will need the Mi Flash Tool (the same as the Fastboot) but with additional drivers:

• 🔧 Download and install the QDLoader driver.
• 📁 Use firmware in.mbn format (usually in the archive marked with a note). EDL).
• 🔄 In Mi Flash Tool, select Clean All mode and press Flash.

⚠️ Attention: Firmware through EDL erases all data, including IMEI After the procedure, you may need to restore the serial number. IMEI (for example, through SN Writer Tool).

6. Hardware problems: when a workshop is needed

If none of the software methods worked, the problem could be the hardware, and here are the signs that the phone needs to be brought into service:

• 🔥 The phone heats up when you try to turn on (possibly short circuit).
• 🔋 Battery swollen or phone doesn't hold charge (even after battery replacement).
• 💾 When connected to a PC, it is defined as Unknown Device or not defined at all.
• 🔊 The phone beeps or makes other unusual sounds when turned on.
• 📱 The screen flashes or shows artifacts (problems with a plume or graphics chip).

Frequent hardware failures:

How to choose a service center?

Prefer official Xiaomi partners or proven workshops with reviews.

• 🔧 Do they have any equipment for the BGA-chips (if the memory problem is a problem).
• 📋 Is there a warranty for repairs (minimum 3 months).
• 💰 Cost of diagnosis (in good services it is free).

7.Prevention: How to avoid hanging in the future

To prevent your Xiaomi from hanging up when you turn on, follow these guidelines:

Updates and firmware:

• 🔄 Install updates MIUI Only through official channels (settings) → Updating the system).
• 🚫 Do not use beta versions of firmware unless you are ready for bugs.
• 📥 Before updating, check the reviews on the forums (for example, 4PDA or XDA).

Working with system files:

• 🛠️ Do not remove system applications (e.g. MiuiDaemon or Security).
• 🔐 If you are rooting your phone, use Magisk (not SuperSU!).
• 📂 Clean the cache regularly in Settings → Memory. → Cleanup.

Hardware care:

• 🔋 Do not allow the battery to be completely discharged (charge at 10-20%).
• 🌡️ Avoid overheating (do not play heavy games when charging).
• 💧 If the phone is wet, do not turn it on, but immediately carry it to the service.

💡

If you experiment with firmware often, install TWRP Recovery and backup /data before any changes, which will save your data if you crash.

FAQ: Frequent questions