Xiaomi Redmi is stuck on the reboot: what to do if the smartphone does not turn on

Now, this is familiar to many people, whether you update your firmware, install an app, or just reboot your Xiaomi Redmi, but instead of your desktop, you see endless animations of the download, the screen flashes the MIUI logo, and then there's silence, the smartphone is stuck in a reboot cycle, and no buttons help, and why it happens and how to bring the phone back to life, let's take a Step-by-step.

Redmi’s reasons for rebooting are divided into two groups: software (software failures, update errors, application conflicts) and hardware (damaged memory, faulty battery). 80% of the time, the problem is solved without visiting the service center – the main thing is to act consistently. But before you start repairing, it is important to understand which stage of the download is blocked: the Xiaomi logo, MIUI animation, a black screen with a flashing indicator or endless reboot after the desktop appears.

In this article, you'll find the latest techniques for all Redmi models (from Redmi 4X to Redmi Note 12 Pro+), including how to save data. If the phone doesn't respond to buttons, doesn't connect to the computer, or gives a Fastboot error, there are solutions. Let's start with the safest methods and gradually move on to radical measures.

1. Forced reset: first step when getting stuck

If Redmi is stuck on the logo or download screen, the first thing you need to do is force it to turn it off and on, and this method works 30% of the time, especially if the failure is caused by a temporary conflict of processes.

To do this, press the button combination:

• 🔋 Power + Volume up – hold for 10-15 seconds until the screen goes out.
• 🔄 If it doesn’t work, try the power. + Loudness down (on some models, for example, Redmi Note 10).
• ⚡ On the Redmi. K50 And you may need to hold the buttons for up to 20 seconds, which is normal.

After turning off, wait 30 seconds and turn on your phone with the standard Power button. If the reboot cycle repeats, move on to the next step.

⚠️ Warning: Don't confuse forced reboot with hard reset. The first method simply restarts the system without affecting the data. The second method deletes everything from the internal memory.

2. Safe Mode boot: Diagnostics of the faulty application

If the phone turns on but immediately goes into reboot, the problem may lie in third-party apps or corrupted system files. Safe mode loads only basic MIUI services, disabling everything superfluous.

To enter safe mode:

1. Turn off your phone (forced if it doesn’t respond).
2. Press the Power button before the Xiaomi logo appears.
3. Once the logo appears, release Power and immediately press Volume down.
4. Hold on until the Safe Mode sign appears at the bottom of the screen.

In safe mode, check:

• 📱 Is the phone stable (is there a restart).
• 🔍 Remove newly installed apps through Settings → Annexes.
• 🗑️ Clear the cache of system applications (especially Google Play Services and the Internet) MIUI System Launcher).

If you're in safe mode, your smartphone is working normally, it's one of the apps you installed. Try to remember what you installed before you crashed, and delete it. If you have a problem, move on to cache reset.

💡

In Safe Mode, turn off the autoload of applications: go to Settings → Battery → Autorun and deactivate suspicious programs.

3.Cache Clearance via Recovery: Recovery without Data Loss

When Redmi is stuck on a reboot due to a corrupted system cache or update, cleaning the cache partition helps, which does not delete user data (photos, contacts, messages), but resets temporary files that can block downloads.

Instructions for entering Recovery Mode:

1. Turn off your phone (if necessary).
2. Press Power + Volume up and hold until a menu with the Mi Bunny logo appears.
3. On some models (Redmi Note 8 Pro, Redmi 9) you may need to first press Volume Up + Power, and after vibration release Power, continuing to hold the volume.

From the Recovery menu (English or Chinese) select:

• 🧹 Wipe & Reset → Wipe Cache (on new versions) MIUI It could be called Clear Cache).
• 🔄 Confirm the action and wait until it is completed (usually takes 1-2 minutes).
• 📱 Go back to the main menu and select Reboot. → Reboot to System.

⚠️ Note: If the Recovery menu does not have Wipe Cache, but only Wipe Data, do not select it, otherwise you will erase all data.

4.Reset to factory settings: a radical solution

If cleaning the cache doesn't work, and the phone is still going to reboot, you'll have to resort to a full reset, which removes all the data from internal memory, including accounts, photos and apps. You can't back it up, so use it as a last resort.

How to Reset Redmi via Recovery:

1. Enter the Recovery menu (instructions in the previous section).
2. Choose Wipe & Reset → Wipe All Data (or Factory Reset).
3. Confirm the action (it may be necessary to enter a password if it was set).
4. After you complete the process, select Reboot to System.

The first download after reset can take 5-10 minutes — that's okay. Don't interrupt the process, even if it seems like the phone is getting stuck again.

⚠️ Note: On models with Mi Account lock (Redmi Note 5 and later), after reset, you will need to enter the information of the Xiaomi account that was tied to the phone!

5. Fastboot flashing: When nothing helps

If the reset doesn't solve the problem and the phone still goes into reboot, you just have to reflash it through Fastboot, which is a method that works for cases where:

• 🔄 The smartphone has been suspended after a failed update MIUI.
• 🛠️ System memory is damaged (errors such as bootloop or system corrupted).
• 🔧 The sensor or buttons are not working, but the computer detects the phone).

You'll need firmware.

• 💻 Windows computer (or Mac/Linux driverless ADB).
• 🔌 Cable USB Type-C (original, undamaged).
• 📄 Firmware for your model (download from the official website) MIUI Download).
• 🛠️ The Mi Flash Tool (you can download it here).

Step-by-step:

1. Unpack the firmware in a folder without Cyrillic characters (for example, C:\MIUI\).
2. Install the Mi Flash Tool and Xiaomi USB Drivers.
3. Turn off your phone and press Power + Volume down to enter the Fastboot (a hare will appear with the inscription Fastboot).
4. Connect your phone to your computer and start the Mi Flash Tool.
5. In the program, click Select, specify the path to the folder with the firmware, then Refresh (should appear). COM-port).
6. Select Clean All mode and press Flash.
7. Wait until it is completed (usually 5-10 minutes).

If the phone still doesn’t turn on after firmware, try repeating the process with another version of MIUI (for example, an older or newer version).

💡

Fastboot is the only way to bring Redmi back to life if it doesn't even boot into Recovery, but it requires strict compliance, or the risk of bricking the phone increases to 30 percent.

6. Checking of hardware faults

If all the software methods have been tried and Redmi is still stuck on the reboot, the problem may be the hardware:

• 🔋 Battery: If it swells or doesn't hold a charge, the phone can cycle over.
• 💾 Memory (eMMC/NAND): Damaged sectors cause system file reading failures.
• 🔌 Contacts: oxidation or contamination of battery connectors/boards.
• 🛠️ Processor/memory: overheating or chip dumping (often after falls).

How to diagnose hardware problems:

1. Check the battery: Disconnect the phone from charging and try to turn on from another cable/block. If the screen flashes and goes out, the battery is likely to malfunction.
2. Inspect the board (only if you have experience): Remove the back cover (on removable battery models, such as the Redmi 4A). Check if there are any swollen capacitors, oxidation or detached plumes.
3. Memory Test: If the phone is switched on at least occasionally, install the AIDA64 app and check the status of eMMC. Read/write errors are a sign of memory wear.

If you are not sure of your skills, it is better to contact a service center. The average cost of diagnosis is 500-1000 rubles, repair (replacement of the battery, soldering of chips) will cost 1500-5000 rubles depending on the model.

7. When to contact the service center

There are situations when self-repair is impossible or dangerous:

• 🚫 Phone does not respond to Fastboot and Recovery (black screen, no vibration).
• 🔥 On the board, traces of burns, bloated elements or corrosion are visible.
• 💦 The phone fell into the water (even if it worked for a while).
• 🔒 After the firmware appeared error Anti Rollback (on models with MediaTek).
• 📱 The screen shows artifacts (stripes, flickering) or does not turn on at all.

Official Xiaomi service centers in Russia (data for 2026):

Before the service visit:

• 📋 Bring a box and a check (if the phone is guaranteed).
• 🔐 Make sure you turn off your Mi Account (if your phone is unlocked).
• 💰 Check the cost of diagnosis – in some centers it is free for further repairs.

FAQ: Frequent questions about Redmi hanging on reboot