How to log into the settings of the Xiaomi router: the full guide over IP 192.168.31.1

Getting into the router control panel is the first and most important step to set up a home network, change your password to WiFi or check your connected devices. Many users are already experiencing difficulties at this stage, as standard access addresses may vary depending on the firmware version (Chinese or global). Understanding how the MiWiFi web interface works allows not only to change the basic parameters, but also to protect the network from unauthorized access.

In this article, we will discuss in detail all possible ways of authorization in the administrative panel of Xiaomi routers, including the use of the app. IP-You'll learn what to do if the page doesn't open, how to restore access when you forget your password, and what nuances are in different hardware models.

Preparation for the entrance to the administrative panel

Before you enter commands into the browser address bar, you need to provide a physical or wireless connection between your device (computer, smartphone or tablet) and the router. This is a fundamental requirement: you can not control the device if your gadget is not on the same local network with it. Make sure that the router is on, the system indicators are on or flashing normally, and the provider’s cable is connected to the WAN port (usually blue).

If you are using a wired connection, insert an Ethernet cable into the LAN-router port and computer network card. If you use WiFi, find the name of your access point in the list of available networks (by default, it often starts with the name of your access point). Xiaomi_ or MiWiFi_) At this point, the password may not be required if the router is new or has been reset to factory settings.

It is important to note that when connecting via WiFi on some models with Chinese firmware, you may need to confirm the sign-in via the mobile app, even if you just want to get into the web interface.

Basic IP-address and domain

The most common way to get into the settings is to enter a special numeric address or domain in the address bar of any browser (Chrome, Safari, Firefox, Opera). For the vast majority of models of routers Xiaomi and Redmi, the standard gateway 192.168.31.1 is used. This address is spelled out by default in the network settings of the device and is the “door” to the control system.

An alternative and more convenient way is to use the alphabetic domain miwifi.com. It works thanks to the protocol. DNS, which forwards the request to the local IP This is especially useful if you don't remember the exact numbers. IP-Enter this address in the browser bar and press Enter. If done correctly, you will see the launch page of the authorization.

There is also a less common address 192.168.0.1, which may occur on some specific models or replicas, but for original Xiaomi products, priority should always be given to the range 31.1.

Authorization process and password entry

When you go to the address, you'll see a welcome screen or a password entry window, and here's an important caveat: if you're setting up a router for the first time after you reset, you may not have an administrator password, and the system will suggest you re-create it, but if the router has already been configured, you'll need to enter the password that was set earlier.

Often users confuse the WiFi password with the admin login password. Many MiWiFi models have default passwords synchronized for convenience. Try to type in the wireless password. If it doesn't work, you may have created a separate administrator password when you first set up.

💡

If you don’t remember the administrator password, and the standard (from WiFi) is not suitable, the only safe way to return access is to perform a full Hard Reset via the button on the device’s case.

The interface may include a "Remember Me" or "Get in as a Guest" checkmark. To make changes to security settings, you must log in under administrator permission. Guest access, if provided by firmware, usually limits the ability to only view the network status without the right to change configuration.

Use of the Mi Home mobile application

Modern Xiaomi routers are sharpened to manage through the ecosystem of the smart home. the Mi Home application (or Mi WiFi for older versions) allows you to enter the settings of the router without using a browser and entering IP-This is especially useful for quick network status checks, guest mode management or blocking uninvited guests.

To get started, download the app from Google Play or the App Store and register an account. Add the router to the list of devices, following the instructions on the screen. Once attached, clicking on the router icon will open a control panel that is almost identical to the web version, but adapted for the mobile interface.

It’s worth noting that features hidden in the web interface are often available through the app, such as more flexible WiFi schedule settings or integration with other smart devices. However, for deep technical customization, such as port skipping or static routes, the web interface is still more informative.

Solving access problems to 192.168.31.1

There are times when the browser persistently writes "Page not found" or "Can't connect." This doesn't always mean that the router is broken. Often the problem lies in the settings of your computer's network card. IP-Address from another subnet, communication with the Xiaomi router will be impossible.

Check the properties of the adapter: in the protocol TCP/IPv4 It should be "Get it." IP-Also try to clear your browser cache or open the page in incognito mode. Sometimes antiviruses or firewalls can block access to local management pages, perceiving them as potentially unsafe.

⚠️ Note: If the indicators on the router flash red or orange, this may indicate a firmware error or lack of Internet connection, in which case it may be difficult or impossible to log in to the settings until a hardware or software error is corrected.

Another common cause is conflict. IP-If you already have another device on your network with 192.168.31.1, your computer may try to contact it instead of the router. IP-computer address manually at 192.168.31.100 with mask 255.255.255.0.

Table of standard access parameters

For convenience, we have collected basic login data for different versions of Xiaomi routers, so save this information so that you do not search for it in case of emergency access.

As you can see from the table, the variations between the versions are minimal, but knowing the exact domain can save time. In global firmware, sometimes you find the router.login address, which is standard for many modern routers.

💡

In 90% of cases, the login problem is solved by checking the cable connection or cleaning the browser cache, and hardware malfunctions are much less common in software conflicts.

Resetting the settings of the Xiaomi router

If you can’t log in because of a forgotten password and the Mi Home app doesn’t work, the last method is a full reset, which will return the router to factory status by removing all user settings, including the network name, passwords and settings of the provider.

On the router body, find a hole marked Reset. It can be recessed into the case, so you'll need a thin object, such as a paper clip or a toothpick. When the router is on, press and hold the button inside the hole for 5-10 seconds.

Watch the system indicator: when it starts flashing orange quickly (or changes behavior), the button can be released. The router will reboot, and in a couple of minutes you can log in as a new device using standard data from the sticker at the bottom of the case.

⚠️ Note: After resetting, the Internet will stop working until you re-enter the data from your provider (PPPoE login and password or Dynamic connection type). IP). Make sure you have this information on hand before starting the procedure.

This method is also useful if the router has started to work unstable, "glutch" or if you bought a used device and want to be sure that it does not have other people's settings.

Frequently Asked Questions (FAQ)