When access to the router’s administrative panel is lost and the Wi-Fi network requires code that you have forgotten, it is one of the most common problems for Xiaomi users. Often, equipment owners are faced with the fact that standard combinations do not fit, or the sticker on the case has been erased from time to time, in which case you need to act systematically using proven methods of access restoration.
There are several ways to do this, depending on whether you've changed your settings before and whether you have physical access to the device. We'll look at both the software tools that you use through the connected devices and the hardware methods that require you to interfere with the gadget. Access recovery is a delicate process, but when you follow the instructions, it's successful 99 percent of the time.
Before you start radical measures like a full reset, it's worth checking out the less disruptive options. Sometimes the code you need can be found in the saved settings of your smartphone or computer, if you've ever connected to that network. Let's take a look at all the options available from simple to complex.
Search for factory data on the device body
The easiest and fastest way to find out the standard access code is to look at the router itself. Xiaomi manufacturers and Redmi sub-brand place an information sticker on the bottom of the case or on the back, next to the cable ports, and that's where the factory settings are set.
Read the label carefully: you are interested in fields marked as Password, PWD Often, the same character combination is used to log in to the web interface and connect to Wi-Fi by default, unless you have previously changed your security settings. In some models, especially the Chinese versions, the password field may be empty or contain QR-code.
If the sticker is saved and readable, try entering the data in it. Pay attention to the letter register, as the system distinguishes between upper and lowercase characters. Also check if you have confused the letters "O" and the numbers "0", which is a common mistake when manually typed.
- 🔍 Look for a sticker at the bottom of the router, sometimes hidden under a removable leg.
- 📝 Record data in good light so you don’t get the symbols wrong.
- ⚠️ Warning: If the sticker is damaged or erased, this method will not work and you will have to look for other ways.
- 📱 Use a Macro-mode phone camera if the font on the sticker is too small.
It’s worth noting that in the new Xiaomi AIoT or Mi Router 4A routers, the factory password can be unique to each device, and this is done for network security purposes to prevent the use of standard botnets for hacking, so searching for universal code on the Internet (like “admin”) is useless in this case.
Use of the Mi WiFi mobile application
If you have a smartphone that was previously connected to the router, you can find all the necessary data in the official Mi WiFi app (or Xiaomi Home), which allows you to manage the network remotely and see current settings without entering a password every time, since authorization is tied to your Mi Account account.
To access the app, select your router from the list of devices. Go to the settings section, often indicated by the gear icon or located in the Wi-Fi settings menu, where you can see the current password from the wireless network and, if necessary, change it to a new one that will be easier to remember.
In some versions of the firmware MIUI or Android shells, the Wi-Fi password can be displayed directly in the phone’s system settings if you have access rights or an appropriate version of the OS is installed. → Wi-Fi, click on your network name and select the "Show Password" option or scan QR-code.
- 📲 Make sure your phone is connected to the same network as the router, or use mobile internet for remote access.
- 🔐 In-app authorization requires a sign-in to the Mi Account that was used when you first set up the app.
- ⚠️ Note: If the router was dropped by the previous owner and tied to his account, you will not be able to manage it without it being detached.
The app also allows you to create guest networks with separate passwords, which is convenient for temporary access of guests, eliminating the need to communicate the basic security code and improves the protection of personal data.
Entering through the web interface IP-address
Access to the settings of the router is through the browser. IP-Device address. By default, Xiaomi routers most often use 192.168.31.1 or the domain name miwifi.com. Enter this data in the browser address bar (Chrome, Safari, Opera) on the connected device.
If a standard address doesn't work, you can find it through the command line on your computer or network settings. On Windows, open the command line and type in the ipconfig command, find the "Default Gateway" line. On macOS or Linux, use the netstat command. -nr | grep default.Received IP-address and address of your router.
When you try to log in, the system will ask for an administrator password. It's important not to confuse it with a Wi-Fi password, although they often match. If you installed the router yourself, remember what code you set to log in to the control panel. If you log in successfully, you will have full control over the network settings.
192.168.31.1
miwifi.comIn case the browser gives a connection error, check whether the Ethernet cable is connected correctly or whether the Wi-Fi connection is working. Sometimes cleaning the browser cache or using incognito mode helps.
What to do if the page 192.168.31.1 is not loaded?
Complete Reset (Hard Reset)
If none of the soft methods worked, and you don’t remember the administrator password, the only way out is to completely reset the settings to factory status, which will return the router to the original parameters, including the password specified on the sticker, or completely remove it (make the network open).
To do the reset, look for the Reset button on the case. It can be separate or combined with the on button. In some Xiaomi models, this is the hole where you press the clip. Press the button for 5-10 seconds until the system indicator flashes orange or yellow.
Once the button is released, the router will restart, which takes about 1-2 minutes, and when it is turned on, the device will be as new as it is, you will need to reconfigure the connection to the provider and specify the network name, and all previously stored data, including logs and history of visits, will be deleted.
- 🔌 Do not turn off the router power during the flashing of the indicator, this can damage the firmware.
- 📉 Reset will remove all PPPoE settings, static IP and DNS, Prepare data from the provider.
- ⚠️ Warning: Make sure you have access to the ISP contract, as the login and password to connect to the network may need to be re-enabled.
This method is guaranteed to give you access to the device, but it takes time to reconfigure, but it is the most reliable way if the previous owner did not give you the data or you forgot complex code invented long ago.
☑️ Preparation for router reset
Table of standard passwords and addresses Xiaomi
For the convenience of users, we have collected basic data that may be required when trying to log in to different router models. Please note that depending on the region of issue (China, Global version, Russia), the parameters may vary.
This data is only relevant if the router has not been reconfigured, and the table shows the most common combinations for popular models.
| Model router | IP-Address/Domain | Login by default | Password default |
|---|---|---|---|
| Mi Router 4A / 4C | 192.168.31.1 | admin | No (as specified when setting up) |
| Mi WiFi 3G / 3 Pro | miwifi.com | - | It's on the sticker. |
| Redmi AC2100 | 192.168.31.1 | - | It's on the sticker. |
| Axia 3000 / 6000 | miwifi.com | - | Absent (first entrance) |
| Older models (R1D, etc.) | 192.168.1.1 | admin | admin |
As the table shows, Xiaomi’s current models are abandoning universal passwords in favor of unique codes, which makes life much more difficult for attackers, but requires the owner to be more careful about saving data from the sticker.
If your model is not listed, try the standard addresses 192.168.0.1 or 192.168.1.1, which are often used in network equipment from different manufacturers.
💡
Modern Xiaomi routers do not have a single factory password "admin", it is unique for each device and is indicated on the sticker.
Security settings after access restoration
Once you have successfully logged in, whether through reset or remembering a password, it is critical to keep your network secure.Using factory passwords or not makes your network vulnerable to third-party connections and traffic theft.
It is recommended to immediately change the Wi-Fi password to a complex one consisting of letters and numbers. Also be sure to set a new password to log into the admin web interface so that no one can change the settings without your knowledge. → Security can be enabled by filtration MAC-Addresses that will allow you to connect only trusted devices.
Remember to update your router firmware regularly. Manufacturers release updates to fix system vulnerabilities. Enable automatic updates if available in your version of the software to always have up-to-date protection.
- 🛡️ Use encryption. WPA2/WPA3, avoiding the outdated and unsafe WEP.
- 🔄 Change your passwords at least once every six months, especially if you have a lot of visitors on the network.
- ⚠️ Attention: Disable the function WPS, It is one of the most vulnerable entry points for hackers.
A good security setup will take no more than 10 minutes, but it will save your personal data from leakage. Remember that a router is the gateway to your entire digital home, and its protection should be a priority.
💡
Use the password manager on your smartphone to save complex character combinations and not forget them in the future.