How to log into the Xiaomi router: standard passwords, reset and restore access

Forgot the password from Xiaomi router and can't go to the admin panel? This is a familiar situation for many users — especially if the device was set up long ago or installed by specialists. Unlike smartphones, where the password is requested daily, the router can run for years without having to log in to the web interface. But when you need to change your Wi-Fi settings, update your firmware or reconfigure your network, the lack of access becomes a critical problem.

In this article, we will look at all possible ways to obtain a password for Xiaomi routers, from standard combinations to forced resetting. Particular attention will be paid to Mi WiFi, AX6000, AX3000, Mi Router 4A and other popular devices. You will also learn how to avoid blocking in the future and where to store login data so you do not lose it again.

Standard login and password for Xiaomi routers

Most Xiaomi routers come with factory credentials, which are listed on the device sticker or in the documentation, but these data may vary depending on the model and year of release.

• 🔑 Password: Admin is a classic combination for old models (Mi Router 3, Mi WiFi Mini).
• 🔑 Login: missing (leave the field blank), Password: admin - used in some versions of Mi Router 4.
• 🔑 Login and password: listed on a sticker under the device (e.g. 12345678 or random character set). AX6000, AX3000 other modern models.
• 🔑 Login: root, Password: root – rare, but found in firmware for enthusiasts.

If the sticker is erased or documentation is lost, try all of these options in turn. Note: after the first sign-in, many Xiaomi routers force you to change your password - this is a security measure that can not be turned off.

Important: Some models (such as the Xiaomi Mi Router 4A Gigabit Edition) may have unique passwords generated based on the serial number, in which case you will not be able to connect without a sticker - you will need to reset the settings.

Where to look for a factory password on a Xiaomi router

If standard combinations do not fit, first check the following places:

1. The sticker on the bottom of the router — usually contains a network SSID, Wi-Fi password and login data to the admin panel. On newer models (AX6000, AX3000), the password can be hidden under a security layer that needs to be scraped off neatly.
2. Box and documentation – complete with the router comes a short guide, where sometimes duplicate credentials.
3. Mi WiFi Mobile App – If the router was previously connected to your Xiaomi account, the data may be stored in the application (Devices section).

If the sticker is missing or the text is not readable, try to light it with a flashlight at an angle, which sometimes helps you see the deleted characters, and you can also take a picture of the sticker and zoom in on your computer.

💡

If you bought a used router, ask the previous owner to provide a photo of the password sticker, and many sellers erase it before selling it, but they can save the photo.

How to reset the password of the Xiaomi router to factory settings

If the standard methods fail, only hardware resets remain, which will return the router to factory settings, including the administrator password, which is suitable for all Xiaomi models, but may differ slightly for some devices.

Turn off all cables except power.

Prepare a paperclip or toothpick to press the Reset button

Make sure there are no important devices connected to this Wi-Fi (they will shut down)

Write down your current Wi-Fi settings (if you remember) to quickly restore them later.-->

To reset, follow the following steps:

1. Find a small hole on the back of the router that says Reset or WPS/Reset.
2. Turn the router on to the network (if it was turned off).
3. Press and hold the Reset button with a paper clip or toothpick for 10-15 seconds until the indicators start flashing or all light up at once.
4. Release the button and wait for the reboot (1-2 minutes).

After reset, the router will create a new Wi-Fi network with the name of the species Xiaomi_XXXX or MiWiFi_XXXX (where XXXX — last-minute MAC-Connect to this network and log in to the admin panel using the standard password (see section above).

⚠️ Warning: Reset removes all settings, including Wi-Fi name and password, associated devices, parental controls and guest access. If the router was part of a mesh system (e.g., Xiaomi Mesh System), you will need to reconfigure all nodes.

Entrance to the Administrator Panel: Step-by-step instructions

Once you have learned or reset your password, you have to log in to the router's web interface.

1. Connect your computer or smartphone to the router network via cable (LAN) or Wi-Fi.
2. Open the browser and enter one of the IP-192.168.31.1 is the main address for most Xiaomi models. 192.168.0.1 is an alternative address (less commonly). miwifi.com is a domain name for convenience (it doesn’t always work).

Enter the login and password (standard or reset).

If you request to change your password, come up with a new one and save it in a safe place (for example, in the password manager).

If the page does not open, check:

• 🔌 Correct connection to the router (try another cable or port).
• 🌐 Network settings on the computer (should be received) IP automatically DHCP).
• 🔄 Turn it off. VPN Proxies – they can block access to the local network.

Frequent errors when logging into the router and their solutions

Even with the correct password, users often face problems when trying to log in, and consider common errors and ways to fix them:

If the router was previously configured via the Mi WiFi app, it's possible that the web interface is disabled.

1. Open the Mi WiFi app on your smartphone.
2. Go to the Devices section and select your router.
3. Find the option “Advanced” or “Router Settings” – there may be a link to the web interface.

⚠️ Note: On some models (AX6000, AX3600) The web interface is disabled by default for security and can only be enabled via the mobile app under Developer Mode (if available).

How to protect your Xiaomi router password from loss

To avoid having a forgotten password problem in the future, follow these guidelines:

• 📝 Save the data in the password manager (for example, Bitwarden, KeePass or built-in browser.
• 📱 Take a photo of the sticker from the bottom panel of the router and save the photo in cloud storage (Google Drive, Mi Cloud).
• 🔄 Configure configuration backup in the web interface (System section» → «Backup/restore) This will allow you to quickly restore the settings after resetting.
• 🔐 Use a complex password (at least 12 characters with numbers and special signs), but write it down in a safe place.

Important: If you sell or transfer a router to another person, make sure to reset your settings, otherwise the new owner will be able to access your home network through the stored data.

💡

Resetting your settings before selling your router is not only a courtesy, it is also a security measure, and the router’s configuration files can store data about connected devices, the history of visited sites (if parental controls were used), and other sensitive information.

FAQ: Frequent questions about passwords for Xiaomi routers