Home network management is increasingly moving to smartphone screens, because it is much more convenient than looking for a laptop or pulling an Ethernet cable. The owner of a modern gadget can change the password from Wi-Fi, set up a guest network or limit the speed for a particular device in just a few clicks. However, the first login to the administrative panel is often questionable, especially if you are doing it for the first time or changing the provider.
In this article, we will discuss in detail the process of connecting to the interface of the Xiaomi router (Mi Router) via a mobile browser. We will look at standard access addresses, possible connection problems and ways to bypass forgotten administrator passwords.
You don’t need to be a network engineer to perform basic hardware setup, but you just need to follow the instructions below to take full control of your home LAN and keep it secure.
Preparing a smartphone for setting up a router
Before you try to log into the control panel, you need to have a physical or wireless connection between your phone and the router. The most reliable way is by wired connection, but in the case of smartphones, we most often rely on Wi-Fi connection. Make sure that your phone is connected to the network that the Xiaomi router distributes, not to the mobile Internet.
It is important to disable mobile data (3G/4G/5G) during setup. Some phone models may ignore the lack of Wi-Fi internet and try to use mobile traffic, which will lead to an error when trying to open a local router address. Go to settings and temporarily turn off mobile data.
☑️ Checking before entering
If you're setting up a new device or reset it to factory settings, look for a sticker on the case that has the default network name (SSID) and password, which are usually located at the bottom of the case. Connect to this network using that data.
Address to enter the control panel Xiaomi
Special access to settings is used IP-The address or domain name that is written in the firmware of the device. Xiaomi and Redmi routers have a default address reserved 192.168.31.1. Also often used is the letter address miwifi.com, which automatically redirects the user to the desired page.
Open any browser on your smartphone: Chrome, Safari, Opera or standard MIUI browser. In the address bar (in the top row where the URL is written, not in the Google or Yandex search bar), enter one of the addresses. After entering, click the transition button.
Why is miwifi.com not working?
The system will request authorization. If you're setting up a router for the first time, you'll be asked to come up with a new administrator password. If the device has already been used, you'll need to enter a previously set password. Write it down in a secure location, because without it, you'll be denied access to the settings.
Step-by-step instructions for entering through a mobile browser
The login process is standardized, but requires careful input. Follow the algorithm to avoid common errors, such as entering a Wi-Fi password instead of an administrator password.
- Run your browser on your smartphone.
- In the address bar, type 192.168.31.1 and click "Go".
- On the page that opens, enter the administrator password.
- Press the login button (usually the blue button with the arrow).
Once you have successfully logged in, you will be taken to the main control panel screen, which displays network status, number of connected devices, and current download speeds, and the interface can be in Chinese or English, depending on the firmware version.
If the interface is in Chinese, look for icons. Usually the exit button is in the upper right or lower corner. To change the language, look for the Settings section → Status → Language. However, the language change is not available on all models without flashing.
What to do if the page does not open
The situation where the browser says "Can't access the site" or "Page not found" is common. IP-Router address on the local network or address conflict.
Try using an alternative method to find the gateway. Go to the Wi-Fi settings on your phone, click on the name of the Xiaomi connected network. In the menu that opens, find the "Router" or "Gateway" field, the numbers listed there (for example, 192.168.1.1 or 192.168.0.1), and there is a current address for login.
⚠️ Warning: If you’re trying to log in through the Mi Wi-Fi app and it doesn’t see the router, make sure the phone is on GPS (Without permission to access the location, the application will not be able to detect the device on the local network due to restrictions. Android/iOS.
Also check if you are using it. VPN. When on VPN-All traffic is going through a remote server, and your phone doesn't see local devices in the apartment. VPN pre-set.
Table of standard access data
For a quick orientation, use the helpsheet, which shows the most common factory data for the various series of routers Xiaomi and Redmi.
| Model router | IP-default | Domain name | Password default |
|---|---|---|---|
| Xiaomi Mi Router 4 | 192.168.31.1 | miwifi.com | Not present (set at the first entrance) |
| Redmi Router AC2100 | 192.168.31.1 | miwifi.com | Not present (set at the first entrance) |
| Xiaomi Mi Router 3G | 192.168.31.1 | miwifi.com | admin (on old firmware) |
| Xiaomi Mi WiFi Nano | 192.168.31.1 | miwifi.com | Absent. |
If none of the addresses are appropriate, IP-The address has been changed by the previous owner or provider, and only a full reset to the factory settings will help).
Resetting Administrator Password and Hard Reset
If you forget the password to log in to the control panel, you can't restore it in the usual way for security reasons. The only way out is to reset the router to factory status, which will delete all settings, including the Wi-Fi password and the ISP's PPPoE data.
Find a hole on the router's body that says Reset, which is usually recessed into the case to avoid accidentally pressing. You'll need a thin object, a paper clip, a toothpick, or a needle. Press the button inside the hole and hold it for about 5-10 seconds until the system indicator flashes orange or yellow.
💡
To avoid reconfiguring your router, take a picture of your ISP’s PPPoE screen before resetting, which will be required to reconnect to the network.
After resetting, the router will restart and create an open Wi-Fi network with a name like "Xiaomi_XXXX". Get in touch with her, go to the address. 192.168.31.1 You can set a new administrator password, and the system will prompt you to reset the original setup.
Using Mi Wi-Fi Application for Management
Instead of a browser, you can use the official Mi Wi-Fi app (available on Google Play and the App Store), which provides a more user-friendly interface for managing your network from your phone, allowing you to download, check speeds and manage smart home devices.
When you first start up, the app will ask you to create a Mi Account or log in to an existing one, which is necessary to link the router to your cloud profile.