Modern routers from Xiaomi and its sub-brands, such as the Redmi AX6, are powerful devices that can provide stable Wi-Fi 6 coverage even in large apartments. However, to unlock the full potential of this equipment, the user needs to access the admin panel, which is where the security, traffic management and LAN configuration settings hide.
The login process can be confusing for a beginner, especially given the Chinese firmware versions that are common on the market. Unlike traditional European routers, standard addresses and password requirements may differ. Proper authorization is the first and most important step to properly configuring your home Internet.
In this article, we will take a look at all the ways you can connect to the management interface, from wired connections to mobile applications. You will learn what to do if the standard address does not open, how to find the right address. IP-Gateway address and what actions to take in case of forgotten password of the administrator.
Preparatory actions before entering the interface
Before you try to enter an address in your browser, you need to provide a physical connection between your device (computer or smartphone) and the router. The most reliable and stable way is to use an Ethernet cable. Connect one end of the cable to the WAN port (usually blue or marked with the corresponding Globe icon) on the router, and the other to the network card of your PC.
If cable use is not possible, make sure your mobile device or laptop is connected to the router's Wi-Fi network. By default, immediately after switching on, the Redmi AX6 gives out an open network with a name containing the device model. Note that when connecting by air, there may be small delays in the interface response, so a wired connection is preferable for the initial setup.
Make sure that automatic reception is configured on your device. IP-addresses (protocol) DHCP). In 99% of cases, the router will give you the necessary parameters, and you will be on the same local network. IP from another subnet, logging into the control panel will not be possible until automatic settings are restored.
☑️ Checking before entering
It is important to check the indicators on the device body. If the system indicator is on (usually blue or orange depending on the Internet status), then the device is working normally. Lack of button response or flashing in red may indicate a boot problem or hardware malfunction, in which logging into the settings does not make sense.
Standard. IP-domain name address
To access the web interface of most routers Xiaomi and Redmi uses a standard domain address. In the address bar of any browser (Chrome, Safari, Firefox, Opera) you need to enter 192.168.31.1 or the letter analogue of miwifi.com.
However, there is a possibility that the previous owner or you yourself changed the standard address range during the past settings. If the above IP page does not load, it is worth checking the addressing manually, on a Windows computer this is done through the command line, and on macOS or Linux through the terminal.
| Parameter | Default value | Alternative meaning | Note |
|---|---|---|---|
| IP-address | 192.168.31.1 | 192.168.1.1 | The main address of the lock |
| domain | miwifi.com | router.mi.com | It only works with an active internet. |
| Login. | admin (rarely) | No (password) | More often than not, only a password is required. |
| Port port | 80 | 8080 | Standard web port |
In some rare cases, especially on re-flashed versions, the address may be changed to 192.168.1.1. If none of the addresses work, go to the section on finding the real one. IP-It's also worth remembering that using the protocol http:// preferably protected https:// locally, as self-signed security certificates can block access by the browser.
💡
If 192.168.31.1 does not open, try adding a slash to the end: 192.168.31.1/, which helps the browser to process the request correctly.
How do you know? IP-Router address if standard does not work
The situation when the standard address does not respond is quite common, especially in complex network configurations. IP-address of your Redmi AX6, You can use the built-in operating system tools. This is the most reliable way to find the default gateway.
Windows users need to open the command line. Press Win + R, enter cmd and press Enter. In the black window that opens, enter ipconfig and press Enter. In the list, find your active connection (Ethernet or Wireless Network) and look for the "Default Gateway" line. The digital code next to it is the address for login.
Owners of macOS or iOS devices should go to network settings. On a Mac, the path looks like: System settings → Network → Additional → TCP/IP. There will be a "Router" option. On an iPhone or Android, you just click on the name of the connected Wi-Fi network and see (more details) where the "Gateway" or "Router" option will be specified.
⚠️ Note: If the gateway field contains an address other than 192.168.x.x (for example, 10.0.x.x or 172.16.x.x), So your router is running in client or bridge mode, or it's giving out the address of another device in a cascade, and then you can control it through the host device on the network.
After receiving the correct IP-If you have a page with the MiWiFi logo loaded, you have a successful connection. Sometimes the browser may warn you that the connection is not secure, this is normal for local devices, feel free to accept the risk and go to the site.
Authorization process: administrator login and password
Once the start page is loaded, you will be greeted by a password entry window. Unlike older models where a universal factory password (often admin) existed, modern Xiaomi routers require you to set a password on the first run. If the router is new or has been reset, the password may not be available and the system will ask you to create a new one.
If you've already used a device, you'll need a password that the previous user set, and often, for convenience, users set the Wi-Fi password at the same time with the administrator password, and try to type in the exact combination of characters that you use to connect wireless devices to the network.
The interface may require a choice of language. Global firmware versions support English and Russian, while Chinese versions (CN Version) are often limited to Chinese and English. Chinese menus can be navigated using a screenshot interpreter, but the main buttons are usually located standardly: a large button in the center means "Login" or "Next".
When you enter a password, pay attention to the letter register and keyboard layout. The system does not show the characters entered for security purposes, so be careful. After three failed attempts, the system can temporarily block access to the control panel for 5-10 minutes to protect against password selection by brute-force.
What to do if the administrator password is forgotten?
Configure via the Mi WiFi mobile application
For those who are uncomfortable with the browser version, Xiaomi has developed a specialized application Mi WiFi (or Mi Home in some regions), which is especially relevant for Chinese versions of routers, where the translation of the menu may not be complete.
To start, download the application from the official store (App Store, Google Play) or install it. APK-File for the Chinese version. After installation, launch the application and register with your Mi Account. Then click the add-on button. The application automatically scans the network and prompts you to add the Redmi you found. AX6.
The functionality of the application is somewhat limited compared to the full web version, but it performs the basic tasks perfectly.
- 📱 View the list of connected devices and block uninvited guests.
- ⚙️ Change your Wi-Fi password and network name in one click.
- 🚀 Run network optimization and speed check.
- 🔄 Update the router’s firmware automatically.
It is important to note that in order for the application to work, the router must have an active Internet connection (WAN). If you are setting up the device for the first time and the Internet is not yet working, the application may not see the router or prevent you from undergoing initial configuration.
💡
A mobile app is the best choice for daily monitoring, but for deep port and DNS setup, it’s best to use a web interface.
Resetting the settings of the Xiaomi Redmi AX6 router
If you can’t log in because of a forgotten password, or if the router isn’t working properly, the only solution is to reset to the factory settings (Hard Reset), which completely clears the configuration memory, returning the device to the “out of the box” state.
On the back of the Redmi AX6 router is a small hole, signed as Reset. To perform a reset, turn the router on to the network and wait for the boot to be completed. Take a clip or a special needle (often included), press the button inside the hole and hold it for 5-10 seconds.
Watch the system indicator: when it flashes orange quickly (or changes color to yellow), the button can be released. the reset and reboot process takes about 2-3 minutes. After that, the router will create an open Wi-Fi network without a password, and you can log in again, as the first time.
⚠️ Warning: Resetting will remove all your personalizations, including PPPoE login/password from the provider, static IP, setting DNS Make sure you have a contract with the provider on hand to restore internet access.
After a successful reset, it is recommended to immediately set a new complex administrator password and update the firmware to the current version to close known security vulnerabilities.