How to go to the settings of the Wi-Fi router Xiaomi: all ways and solutions to problems

Xiaomi routers are among the most popular devices for home networking due to their combination of affordable prices, high performance and easy management. However, even experienced users sometimes have difficulty logging into the router’s administrator panel. This article will help you figure out how to get into the settings of Xiaomi’s Wi-Fi router of any model, from the budget Mi Router 4A to the flagship AX6000.

We will consider all possible ways of access: through a browser on a computer or smartphone, using the standard IP-We will focus on common errors (for example, when the router does not open the login page) and how to fix them. If you forget the password from the control panel or have other problems, here you will find working solutions.

This article is relevant for all modern models of Xiaomi Mi Router, including Mi Router. 4C, Mi Router 4Q, AX1800, AX3000, AX3600 and AX6000. Instructions checked on firmware MIWIFI_R3G newer (2023–2026 garland.).

1. Preparation for entering the router settings

Before you try to log into the Xiaomi web interface, make sure that the basic conditions are met:

• 🔌 The router is connected to the power source and is on (the power indicator is on or flashing).
• 📶 Your device (PC, laptop, smartphone) is connected to the router network via Wi-Fi or Ethernet cable.
• 🌐 Uses a modern browser: Google Chrome, Mozilla Firefox, Microsoft Edge or Safari (for Mac).
• 🔒 Disabled. VPN, Proxies or corporate networks that may block access to local networks IP-address.

If you are connected to Wi-Fi, check the network name (SSID) — It should be the same as the router’s sticker (usually). Xiaomi_XXXX or MiWiFi_XXXX). When connecting cable, use the port. LAN (yellow connector) on the back of the device.

⚠️ Note: If the router was previously configured by another user, the standard router may have changed. IP-the address for the entrance (not 192.168.31.1.

2. Standard method of entering through the browser

The most universal method is to use a web interface.

1. Open any browser and enter one of the standard ones in the address bar IP-Xiaomi addresses: 192.168.31.1 is the main address for most models. 192.168.0.1 is an alternative option (less commonly). miwifi.com is a domain name (does not work on all firmware).

Enter

• Login: admin
• Password: Admin or the one on the router sticker (for new models).

If the page does not open, check:

• 🔗 Correctness of the input IP-addresses (no typos, spaces).
• 📡 Router network connection status (Wi-Fi or Ethernet icon in system tray).
• 🔄 Try updating the page (F5) or use another browser.

For models Xiaomi AX6000 and AX3600 with firmware 2023+ year, the standard password may be different – it is indicated on the sticker under the device in 8 digit format (for example, 12345678).

3. Log in via the Mi Wi-Fi mobile application

Xiaomi offers the official Mi Wi-Fi app (formerly Mi Router) to manage routers from your smartphone, which is convenient if you don’t have access to your computer.

• 📱 Download for Android
• 🍎 Download for iPhone

Instructions for entry:

1. Install and open the application.
2. Connect your smartphone to the network of the Xiaomi router.
3. The app will automatically detect the device. Click on its name in the list.
4. Enter the administrator password (by default admin or from the sticker).

Advantages of the annex:

• ✅ Simplified interface for basic settings (change Wi-Fi password, guest network).
• ✅ The ability to control the router remotely (with the enabled function Remote access).
• ✅ P.USH-notifications of new connections to the network.

⚠️ Note: In some regions (e.g. the EU), the Mi Wi-Fi app may not display all features due to limitations. GDPR. In this case, use the web interface.

4. Solving problems with access to settings

If the router doesn’t open the login page or gives an error, try the following steps:

If none of the methods helped, perform a hardware reset:

1. Find the Reset button on the back of the router (usually deepened into the case).
2. Take a paperclip or toothpick, press and hold the button for 10-15 seconds until the indicators start flashing.
3. After restarting the router, try again to log in with standard data.

5. Alternative ways of entering

If standard methods don’t work, try these options:

• 🔧 Through Telnet/SSH: For advanced users, connect to Telnet. IP router 23) login-password root/admin. Caution: This could violate the guarantee!
• 🖥️ Through the local network: If the router distributes IP, But the web interface is not available, check the network map settings. IP ranged 192.168.31.x (for example, 192.168.31.100).
• 📡 Through Access Point Mode: Connect the router to another device via cable and try to log in from it.

For models with support for Mesh networks (for example, Xiaomi AX3600 paired), the entrance is only through the main node. Connect to this, and not to the additional router.

💡

If you often forget your router password, save it in a password manager (such as Bitwarden or KeePass) marked “Xiaomi Router.”

6.Safety when working with settings

After successfully logging into the Administrator Panel, follow the following security rules:

• 🔐 Change the standard password: Go to Settings → Account and set a complex password (at least 12 characters with numbers and special signs).
• 🛡️ Disable Remote Access: If you do not use external router control, deactivate Remote Access option in the Additional section.
• 🔄 Update your firmware: Regularly check for updates to the System → Software update. This closes the vulnerability.

Avoid:

• ❌ Use simple passwords like 12345678 or password.
• ❌ Connecting to a router via public networks (for example, in a cafe).
• ❌ Saving password in the browser without encryption.

💡

Changing the standard administrator password is the first step to protecting your network from unauthorized access.

7. Frequent questions and answers