Logging into the control panel of Xiaomi router from the phone is a task that every user faces when first setting up a network or troubleshooting. Unlike a computer where the process is intuitive, mobile devices require knowledge of nuances: from the correct input. IP-This article covers all current methods of accessing the web interface and the Mi Wi-Fi application, including solutions for cases when the router does not respond or the password is forgotten.
Feature of Xiaomi routers (series Mi Router) 4A/4C/4Q, AX3600/AX6000 And others: flexibility of settings through the mobile app, but many of the features are only available through the browser. QR-code that works even when your password settings are reset. 2023–2026 Years and tested on the latest versions Android/iOS.
1.Preparation: What to know before entering
Before you try to go into the settings, make sure that the basic conditions are met:
- 📶 Connection to the router network: the phone must be connected to Xiaomi Wi-Fi (not via mobile internet!).The network name is usually indicated on the sticker at the bottom of the device (for example, the phone must be connected to Xiaomi Wi-Fi, Xiaomi_XXXX).
- 🔋 Router power: the indicator on the front panel should be blue (work mode) or orange (load.
- 📱 Updated software: for models AX-The series recommended firmware version is not lower than 1.2.45 (check in the Mi Wi-Fi application).
If the router is new, it may be in mode. AP Mode (access point) where IP-In this case, use 192.168.31.1 instead of 192.168.0.1. Also note the sticker on the back of the device - there are factory details for the login (usually login: admin, password: admin or empty).
⚠️ Note: If you previously changed the password from the control panel and forgot it, the selection attempts block access for 5 minutes after 3 unsuccessful attempts.
2. Method 1: Browser Login (Web Interface)
The classic method, which works on all Xiaomi models, is suitable for deep customization where the Mi Wi-Fi application is limited (for example, changing the DNS, setting up the VLAN or updating the firmware manually).
- Open a browser on your phone (Chrome, Safari, or Firefox) and avoid lightweight versions (such as Chrome Lite) that may not display the interface properly.
- Enter one of the address bars IP-192.168.31.1 – the main address for most models; 192.168.0.1 – an alternative address (for old firmware); miwifi.com – a domain name (does not always work).
Click Enter. The login page with the Login and Password fields should open.
If the page does not load:
- 🔄 Check the connection to the Wi-Fi router (not another network!).
- 🚫 Turn it off. VPN or proxy in the phone settings.
- 🔍 Try another browser or clear the current cache.
☑️ Check before entering the web interface
| Model router | Factory IP-address | Default login/password |
|---|---|---|
| Mi Router 4A | 192.168.31.1 | admin/admin or empty |
| Mi Router 4C/4Q | 192.168.31.1 | admin/password from the sticker |
| AX3600/AX6000 | 192.168.31.1 or miwifi.com | Password from the sticker (8 characters) |
| Mi Router Pro | 192.168.0.1 | root/admin |
3. Method 2: Using the Mi Wi-Fi application
The official Mi Wi-Fi app (available for Android and iOS) makes it easier to manage your router, but has limitations, such as you can’t configure DDNS or change your MTU, but it’s perfect for basic tasks (wi-fi password change, parental controls, guest network).
Instructions for connection:
- Download the application from official sources: 🤖 Google Play for Android); 🍎 App Store (for iOS).
Launch the application and allow access to the location (necessary to search for a router).
Click Add Device → Router. The app will automatically find your Xiaomi on the local network.
Enter the Wi-Fi password (if requested) or login details to the control panel (login/password from the sticker).
If the application does not find the router:
- 🔌 Restart the router (turn off power for 10 seconds).
- 📱 Make sure your phone is connected to a 2.4GHz network (the app may not see 5GHz).
- 🔄 Update the application to the latest version.
💡
If you have an AX-series router, Mi Wi-Fi has hidden Expert mode, and to turn it on, click the gear icon in the top right corner three times.
4. Method 3: Entry through QR-code (for new models)
From 2022, Xiaomi added the ability to enter settings through scanning QR-This method works even if you forget the password from the control panel, but requires physical access to the router.
Step-by-step:
- Turn the router over and find the sticker with QR-code (usually next to the serial number).
- Open the Mi Wi-Fi app and click Scan QR (icon in the upper right corner).
- Put the phone camera on QR-The application will automatically connect to the router and open the control panel.
If QR-code is not readable:
- 🕯️ Check the lighting – the code should be clearly visible.
- 📱 Clean the phone's camera of dirt.
- 🔄 Try using a third-party crawling app (like Google Lens) and then enter the data manually.
What to do if QR-code erased?
5. Addressing access issues
If none of these methods work, the reasons may be as follows:
| Problem. | Possible cause | Decision |
|---|---|---|
| The authorization page is not opened | Wrong. IP-address or router not responding | Check Wi-Fi connection, try ping 192.168.31.1 in terminal |
| The "wrong password" error | Password changed or reset | Use it. QR-code or reset |
| The application does not find the router | Incompatible firmware or network settings | Update the firmware via the web interface or reset the settings |
To diagnose the network, use the command in the phone terminal (root rights or the Termux app are required):
ping 192.168.31.1If the ping passes (64 bytes from 192.168.31.1) but the page does not open, the problem is in the browser or router settings. If there is no ping, check the physical connection or reset the router.
⚠️ Note: Xiaomi routers with Developer Version firmware may be disabled access via 192.168.31.1. In this case, use 192.168.0.1 or connect to the SSH (Login: root, password: admin).
6. Reset router settings (if the password is forgotten)
If you lose login data, the only way to restore access is through a hardware reset, which will return the router to factory settings, but will delete all user settings (wi-fi name, passwords, Port Forwarding, etc.).
How to reset:
- Find the Reset button (a small hole with the words RESET or WPS/RESET) on the back of the router.
- Take a paperclip or toothpick, press and hold the button for 10-15 seconds until the indicator blinks quickly in orange.
- Release the button. The router will restart (it will take 1-2 minutes).
- Connect to the network. Xiaomi_XXXX (password is indicated on the sticker) and enter the settings through 192.168.31.1 login-password.
After discharge:
- 🔒 Change the password from the control panel in the Settings section → System system → Administrator password.
- 📡 Reconfigure Wi-Fi (network name and password).
- 🔄 Update the firmware to the latest version (Update tab).
💡
Resetting the router is a last resort. Try logging in through the router before you do. QR-code or check the correctness of the input IP-Addresses: After resetting all settings, including Port Forwarding and DHCP-reservations, will be lost!
7. Alternative methods (for experienced users)
If the standard methods do not work, try:
- 🌐 Access through SSH: model AX-The Developer series can be connected to SSH From your phone (use the Termux app): ssh root@192.168.31.1 Password: admin
- 📡 Cable Connection: If Wi-Fi is not working, use it USB-OTG adapter + Ethernet cable (support required) USB Ethernet by phone).
- 🔧 Firmware via MiFlash: in extreme cases, you can reflash the router through PC (instructions on the official website).
To connect over SSH, you may need to enable this mode in the router settings (Advanced → SSH section). On some firmware, it is disabled by default.