How to log into the control panel of the Xiaomi router: all ways and solutions to problems

The web interface of the Xiaomi router is the central control node where Wi-Fi network, parental control, port forwarding and other critical parameters are configured. However, many users face difficulties already at the login stage: the page does not open, the password does not fit, the router does not respond to queries at all. In this article, we will discuss all the current ways to log into the control panel for the Mi Router 4/4A/4C/5/AX3000/AX6000 models, including solutions for typical errors and alternative access methods.

Xiaomi routers are very closely integrated with the Mi Home ecosystem, which sometimes complicates the process. For example, some models (such as the AX3600) block access via classic IP by default, requiring authorization through the application, and we will explain how to circumvent these restrictions legally and without risking network security.

Important: If you purchased a used router or received it from a provider, the first thing you do is reset to factory settings, which will eliminate 90% of access problems.

1. Standard method of entry through IP-address

The most common method is the use of local IP-For most models Xiaomi are relevant two options:

• 🌐 192.168.31.1 – the primary address for most Mi Router routers 4A Gigabit, AX1800, AX3000).
• 🌐 192.168.0.1 – Alternate address, can be used in some regional firmware or after manual subnet change.
• 🔍 miwifi.com – a domain name that automatically redirects to a local IP (It only works when you connect to the router network).

To enter:

1. Connect to the router’s Wi-Fi network (or use an Ethernet cable).
2. Open your browser (Chrome, Edge, Firefox – do not use Safari on macOS due to certificate issues).
3. Enter one of the address bars IP-Addresses above and click Enter.
4. Enter the login and password (by default - see the table below).

Connect to a router network (Wi-Fi or Ethernet)

Open the browser in incognito mode (without extensions)

Enter 192.168.31.1 or miwifi.com in the address bar

Try an alternative. IP, if the main one is not working-->

If the page does not open, check:

• ⚡ Router power – indicators should burn stably (without blinking).
• 🔌 Connect to the network – try reconnecting to Wi-Fi or using a cable.
• 🖥️ Browser – Clear the cache or try another (e.g. Opera).
• 🛡️ Firewall/antivirus – temporarily disable them.

2. default login and password for Xiaomi

Factory credentials depend on the model and version of the firmware. Below is the current table for modern Xiaomi routers (2020-2026 release):

⚠️ Note: If you see a Mi Account authorization window instead of a standard login/password entry, the router is linked to the previous owner's account:

🔹 Reset the router to factory settings (reset button for 10 seconds).🔹 If the reset does not help, use alternative entry methods (Section 4).🔹 For models AX-The official Mi Wi-Fi application may be required (download link at the end of the article).

💡

If you have forgotten your Mi Account password, restore it through account.xiaomi.com, which requires access to an email or phone linked to your account.

3. Addressing access issues

If the control panel does not open, follow the diagnostic algorithm:

Page not open (404 error or timeout)

Inappropriate login/password

Router requires a link to Mi Account

Other (clarify in the comments)-->

3.1. Error "Page not available" (ERR_CONNECTION_TIMED_OUT)

Causes and solutions:

• 🔌 Incorrect connection – check that your device is connected to the router’s network (not another access point (macOS/Linux), to make sure that the default gateway is in line with IP router.
• 📡 Failure DHCP — appoint IP-hand-mail 192.168.31.x (e.g. 192.168.31.100) with mask 255.255.255.0.
• 🔄 Conflict IP — Disconnect all devices from the router except one PC and try again.
• 🛠️ Hardware failure – if the indicators are not burning stable, try another power supply (5V/2A).

Authorization error ("Incorrect password")

What to do:

1. Make sure that Caps Lock is turned off (the password is case sensitive).
2. Try an empty password (for old Mi Router 4 firmware).
3. If the router is used, reset the settings.
4. For models with reference to Mi Account, use the official application.

4.Reset router to factory settings

If you can't log in to the control panel, resetting is the most reliable way to get access back.

1. Find the Reset button on the back of the router (usually recessed in the case).
2. Take a paperclip or toothpick, press and hold the button for 10-15 seconds until the indicators start flashing.
3. Release the button and wait for the reboot (1-2 minutes).
4. Connect to a Wi-Fi network with a name Xiaomi_XXXX (password is on the sticker).
5. Log in to the control panel using standard IP (192.168.31.1) and login/password admin/admin.

⚠️ Note: Reset removes all settings, including:

📌 Wi-Fi configuration (network name and password)📌 Parental Control and Guest Network Rules📌 Port forwarding (port forwarding) settings)📌 Tied devices in Mi Home

💡

After reset, be sure to update the router’s firmware to the latest version through the control panel, which will eliminate security vulnerabilities and add support for new features.

5. Sign in via Mi Wi-Fi app (for new models)

Xiaomi routers AX-series, for example, AX3000, AX6000) They often block access through the browser, requiring authorization through the official app:

1. Download Mi Wi-Fi for Android or iOS.
2. Connect to the router network (Wi-Fi or Ethernet).
3. Open the application and click Add Device → Router.
4. Follow the instructions on the screen (scanning may be required) QR-router-code).
5. Once you have linked to your Mi Account, you will get access to the control panel through the app.

Advantages of this method:

• 🔒 Security – Two-factor authentication with Mi Account.
• 📱 Convenience – control from the phone, notifications about new devices on the network.
• 🔄 Automatic updates – firmware is updated in the background.

Disadvantages:

• 🚫 Account binding – without access to the previous owner’s Mi Account, the router will be blocked.
• 🌍 Regional restrictions – some features may not be available outside of China.

1. Reinstall the appendix.

2. enable GPS on the phone (required for geolocation).

3. Connect to the router via Ethernet adapter (for iPhone).-->

6. Alternative ways of entering

If standard methods don’t work, try these options:

6.1. Entrance Telnet/SSH (for advanced users)

Some Xiaomi models allow you to connect over Telnet or SSH for manual configuration.

1. Install PuTTY (Windows) or use the terminal (macOS/Linux).
2. Connect to the router via IP: telnet 192.168.31.1 or ssh admin@192.168.31.1
3. Enter the root login and password (by default empty or admin).
4. To enable the web interface, run: nvram set http_enhance=0 nvram commit reboot

⚠️ Note: Incorrect commands in the Telnet/SSH You can only use this method if you're confident in your actions.

6.2 Entry through TTL-mode (to unlock)

If the router is locked at the firmware level (for example, after a failed update), you can try to enter emergency mode:

1. Turn the router off the power.
2. Press the Reset button and, without letting it go, connect the power.
3. Hold the button for 20-30 seconds until the indicators start flashing in non-standard mode.
4. Connect to the router on IP 192.168.1.1 (In this mode, the login / password often works. admin/admin).

7. Frequent errors and their solutions

Let’s look at the typical problems and ways to solve them:

- Router models (on the sticker at the back)

- Firmware versions (if visible in the control panel)

Descriptions of the problem (screenshots of errors)

This will speed up the solution of the problem by 3-5 times.-->

FAQ: Answers to Frequent Questions