How to go to the settings of the Xiaomi Mi Router 4A router: all ways and solutions to problems

Xiaomi Mi Router 4A is a popular home networking device, but even experienced users sometimes have difficulty accessing its settings. Without the right login to the control panel, you can’t change your Wi-Fi password, set up your guest network, or update your firmware. In this article, we’ll look at all the current authorization methods, including browser login, the Mi Wi-Fi mobile app, and solving typical problems, from forgotten password to reset to factory settings.

The Mi Router 4A features both a classic web interface and a proprietary application with advanced features, but many users experience bugs like “Page unavailable” or “Incorrect login/password.” We explain in detail why this happens and how to fix it. You will also learn what settings can be changed without logging into the control panel – for example, through physical buttons on the device body.

This article will be useful for both beginners and those who have tried to go into the settings but have received an error. All instructions are checked on the latest versions of the Mi Router 4A firmware (including the global and Chinese versions). If your model is different, check this out in the comments and we will help you adapt the steps.

1.Preparation for the entrance: what you need to know before the beginning

Before you try to go into settings, make sure that the basic conditions are met. Without them, even the correct password won't help.

🔌 The router is on and the power indicator is on blue (in operation mode) or orange (when booting). If the light bulb does not light, check the power supply and cable.
📶 It's connected to the router via Wi-Fi or cable. LAN-port (yellow connector on the back panel).
🌐 Older versions of Chrome, Edge or Safari may not support the Mi Router interface.
🔒 Turn it off. VPN/Proxies: These services can block access to the router's local network.

If you're connected to Wi-Fi but the settings page doesn't open, try reconnecting to the network. Sometimes it helps to turn off the Quick Connection feature in the Wi-Fi settings on your smartphone or laptop. Also check that you're connected to Mi Router 4A, not a neighbor network with a similar name.

⚠️ Note: If the router was purchased by hand, the previous owner could change the standard router. IP-Control panel address (e.g. 192.168.31.254) In this case, you will need to reset your settings.

📊 How do you usually set up a router?

Through a browser on a PC

Through the mobile app

Never set up.

Another way.

The most universal method is to use a web interface, which works even if the Mi Wi-Fi app is not installed or compatible with your device.

Step 1: Find out IP-router

The standard address for Mi Router 4A is 192.168.31.1 or miwifi.com. If they don't work, find the current IP one of the ways:

🖥️ On Windows: Open the Command Prompt (Win) + R → enter cmd → Enter) and execute the command: ipconfig /all Look for the “Main Gateway” line – that’s what it is. IP router.
📱 On Android: Go to Settings → Wi-Fi, tap your network name and look at the Gateway field».
🍎 Nana macOS/iOS: In System settings → Network → Additionally. → TCP/IP Find the router».

Step 2: Authorization in the Control Panel

Open the browser and enter the found IP-You should have a login page with login and password fields. 4A:

Field.	Default value	Note
Login.	admin	Sometimes the field is left empty.
Password.	Admin or Wi-Fi Password	On new firmware, the password may match the network key
Alternative login	Phone number (if linked to Xiaomi account)	It only works when configured through the application

If the standard data doesn't fit, the password has been changed, and then resetting (section 5) will help, and after you log in, you'll see the main menu with Status, Wi-Fi, Internet, and more.

☑️ Checking before entering

Make sure the router is onConnect to its network via cable or Wi-FiOpen the browser in incognito modeIntroduce the right IP-address

Done: 0 / 4

3. Method 2: Entry through the Mi Wi-Fi application

The Mi Wi-Fi app (formerly Mi Router) offers a more user-friendly interface than the web version, available for Android and iOS, but has limitations:

📱 It only works on smartphones (no PC version).
🌍 Requires registration in the Xiaomi ecosystem (Mi Account account).
🔄 Not all functions duplicate the web interface (e.g. advanced settings) DDNS Port Forwarding may not be available).

Instructions for entry:

Download Mi Wi-Fi for Android or iOS.
Connect to the router network via Wi-Fi.
Open the app and click “Add router” (+ in the upper right corner).
Select Mi Router 4A from the list of available devices.
Enter the Wi-Fi password (if requested) or login details to the control panel.

If the application does not find the router, check:

🔄 Update the application to the latest version.
📶 Turn off mobile internet (the application should only work via Wi-Fi router).
🛠️ In the smartphone settings, allow Mi Wi-Fi access to the local network.

⚠️ Note: Some of the Mi Router firmware 4A The app can request a link to a Xiaomi account even for local management. If you don't want to register, use the web interface.

💡

If the Mi Wi-Fi app doesn’t see the router, try manually entering it. IP-address in the search bar inside the program (the magnifying glass icon at the top).

4. Solving entry problems

If none of these methods worked, we will analyze the typical errors and correct them.

Error: “Page is not available” or “Can’t connect”

Causes and solutions:

🔌 Router doesn't give away. IP-Addresses: Check if it is included DHCP-server in settings. If not, assign IP manually (e.g. 192.168.31.100 with 255.255.255.0 mask).
🔒 Antivirus/firewall lock: temporarily turn off protection or add IP router.
📡 WRONG Wi-Fi Channel: If the air connection is unstable, use a cable.
🔄 Firmware failure: If the router indicator flashes red, flashing through recovery mode is required (TFTP).

Possible scenarios:

🔑 The password has been changed, but you forgot it. → reset.
📱 Mi Wi-Fi app requires Xiaomi account, but you didn’t tie it → Use the web interface.
🖥️ On some firmware, the login is the router's serial number (printed on the sticker below).

If you are sure you are entering the correct password but the login is not going through, try:

Clear the browser cache or use another (such as Firefox).
Disable AdBlock extensions – they can block authorization scripts.
Try logging in from another device (e.g., from a phone instead of a PC).

What to do if the router is blocked by the provider?

Some ISPs (e.g. Rostelecom or Beeline) block access to the settings of routers leased. In this case: 1. Check the contract - perhaps changing the settings is prohibited. 2. Try logging in via Telnet (if port 23 is open). 3. Contact the provider's support to request access unlocking or provide an alternative router.

5. Resetting settings to factory

If you lose your password or your router is unstable, hard reset will help, and all settings, including your Wi-Fi name and password, will return to standard.

Method 1: Button RESET case

On the back of the Mi Router 4A, there is a small RESET button (sometimes signed as WPS/RESET).

Take a paper clip or a toothpick.
Press and hold the RESET button for 10-15 seconds until the indicator flashes quickly in orange.
Release the button and wait for the reboot (1-2 minutes).

Method 2: Through the web interface (if available)

If you can log in to the control panel but want to return factory settings:

Go to Settings → System → Backup / Reset.
Click “Reset settings” and confirm the action.

⚠️ Warning: After reset, the router will return to the factory name of the network (Xiaomi_XXXX) And the password (indicated on the sticker at the bottom) If the sticker is erased, the default password is admin or an empty line.

💡

Resetting is a last resort, and try to remember your password before doing so or use the restore function through your Xiaomi account (if it was linked).

6. Alternative ways to control the router

If the web interface and application are not available, there are several options:

Management through Telnet/SSH

For experienced users:

🖥️ Install PuTTY (Windows) client or use the terminal (macOS/Linux).
Connect to the IP router via Telnet (port 23).
The login and password are the same as for the web interface.

Commands for control (examples):

# View the list of connected devices


cat /proc/net/arp




Router reboot



reboot

Use of third-party firmware

Mi Router 4A supports alternative firmware like OpenWRT or Padavan, which provide advanced features, but:

⚠️ Risk of “bricking” (turning into a “brick”) with incorrect firmware.
🔧 Skills required to work with TFTP and SSH.
📥 Xiaomi’s official support will be lost.

If you decide to use custom firmware, look for instructions on the 4PDA or OpenWRT forums marked “For Mi Router 4A (R4A)”.

7. Frequent questions and answers

Can I access the router settings from my phone without the Mi Wi-Fi app?

Yes, use your browser on your smartphone. IP-router address (e.g. 192.168.31.1) and log in. The interface is mobile-friendly, but some elements may not display correctly. For convenience, turn on PC Mode in your browser settings.

Why does the router not give out the Internet after resetting?

Resets the provider's connection settings back to factory settings. You need to re-enter the data to access the Internet: Go to Settings → Internet. Select the connection type (PPPoE, Dynamic IP, etc.). Enter the username/password from the provider (specified in the contract). Save and restart the router. If you do not know the type of connection, check with the provider's technical support.

How to change your Wi-Fi password if you forget your old one?

Without access to the settings, there are two options: Reset the router (section 5). After that, the password will become standard (admin or indicated on the sticker); WPS connection (if the function is enabled); Press the WPS button on the router, then on the device select the network without a password. Note: this method only works if the WPS is activated in the settings.

Can you control Mi Router 4A via the voice assistant (Alice, Google Assistant)?

There is no direct control through voice assistants, but you can use workarounds: 🔌 Connect the router to the Xiaomi Smart Home system via the Mi Home app. Then some functions (on / off the guest network) will be available through Alice. 🤖 Use it. IFTTT Home Assistant to create automatic scripts (requires customization skills).

Why do not the settings open after the firmware update?

This is a typical problem when you update incorrectly. Try: Clear the browser cache or use another (for example, Mozilla Firefox); Reset the router settings (section 5); roll back the firmware to the previous version through the recovery mode (requires a PC and MiWiFiRepairTool). If the problem persists, contact Xiaomi with the firmware version (this can be seen on the router sticker or in the Mi Wi-Fi app before the update).

8 Conclusion: Which way to choose?

The choice of the entry method depends on your task and the tools available:

🖥️ Web interface - a universal option for any OS, suitable for deep customization.
📱 Mi Wi-Fi app – convenient for quick changes (for example, change the Wi-Fi password), but requires a Xiaomi account.
🔧 Resetting – if you forget your password or the router is unstable.
🛠️ Telnet/SSH — for experienced users who need advanced management.

If you’re setting up Mi Router 4A for the first time, we recommend starting with the web interface, which gives you maximum control over the device.

Remember, after any change in settings, restart your router to avoid conflict, which is especially important when changing your Wi-Fi channel or type of Internet connection.

💡

Save the password from the control panel in a safe place (for example, in the password manager). Standard admin is easy to crack, and resetting the settings erases all your settings, including the associated devices.