How to log into the settings of the Xiaomi router through your computer: all ways and solutions to problems

Logging into the control panel of the Xiaomi router via a computer is the basic procedure necessary to set up a network, change a Wi-Fi password or update a firmware. However, even experienced users sometimes face difficulties: the router does not open the authorization page, forgotten the username / password or IP-The device address changed after the reset. In this article, we will discuss all the current ways to log into the Xiaomi Mi Router settings (including models). 4A, 4C, AX1800, AX3000, AX6000), We also solve typical access problems.

The difference between our guide and standard instructions is that we take into account the features of MiWiFi firmware (Chinese version) and the global version of the software, as well as the emphasis on security. For example, you will learn why you should not use a standard admin password and how to protect a router from hacking through web interface vulnerabilities. We also tested all methods on the latest firmware versions (2026) and indicated differences for older models.

Preparation for Entry: What You Need to Know Before Starting

Before you try to go into the router settings, make sure that the basic conditions are met:

• 🔌 Xiaomi router is connected to the power grid and turned on (power indicator is lit green or blue).
• 💻 The computer is connected to the router via Ethernet cable (recommended) or Wi-Fi. For stability, it is better to use a wired connection, especially if you plan to update the firmware.
• 🌐 Computer's offline. VPN, Proxy servers and antivirus firewalls (they can block access to the local network).
• 🔄 If the router was previously configured via the Mi WiFi mobile app, it may be that the web interface is disabled in the settings.

Important: If you connect over Wi-Fi, make sure that your computer is on the same network as the router. Xiaomi_1234, and you're connected to Xiaomi_1234_5G, You'll be blocked from accessing the settings. IP-The computer address is automatically received (DHCP). Manually prescribed static IP It may conflict with the router network.

Standard method of entry: through IP-address 192.168.31.1

Most of the Xiaomi routers are used IP-192.168.31.1 to access the web interface, which is relevant for global firmware versions, and for Chinese versions (with MiWiFi firmware), 192.168.0.1 or miwifi.com can be used:

1. Open any browser (Chrome, Firefox, Edge). Avoid Internet Explorer, which may not display the interface correctly.
2. Enter in the address bar 192.168.31.1 and press Enter.
3. Wait for the login page to load. If the page doesn't open, check the router connection or try the alternate addresses in the table below.

If 192.168.31.1 is not working, try other options:

Critical information: If the router has previously been configured through the Mi WiFi app, the web interface may be disabled in the security settings. To enable it, go to the app, go to the router Settings → Additional → Web administration and activate the option.

Login and password for login: standard and user

After input IP-The system will request a username and password. By default, most Xiaomi routers use the following combinations:

• 🔑 Login: admin
• 🔑 Password: Admin (or an empty field for older models)

But there are nuances:

• 🔄 If the router has already been configured, the password may have been changed, in which case try the Wi-Fi password (sometimes the same ones).
• 🔐 For Chinese versions (MiWiFi), the default password can be listed on a sticker under the router (usually an 8-digit code).
• 📱 If you used the Mi WiFi app for the initial setup, the password for the web interface could be generated automatically. → Admin password.

If the standard data doesn't fit, and you don't remember the password, you'll have to reset the router to the factory settings.

1. Press and hold the Reset button (usually located on the back) for 10-15 seconds.
2. Wait until the indicators on the router flash and it restarts.
3. After reset, use the standard login/password (admin/admin).

Make sure that the router does not have important settings (VPN, ports, parental controls)

Write down your current Wi-Fi settings (network name and password)

Prepare a backup of the configuration (if there is an export function)

Disconnect all critical devices from the router (IP-camera, NAS)

-->

⚠️ Note: Router reset removes all user settings, including Wi-Fi settings, ports, VPN And parental control, if the router was used on a network with a link to the MAC-address (e.g. office or university campus), after reset, internet access may disappear until the device is re-registered.

Solving problems with access to the web interface

If the login page doesn't open, the reasons can be different. Let's look at typical scenarios and how to fix them:

1. page is not loaded (the error "Site is not available")

Check the following points:

• 🔌 Make sure that the Ethernet cable is connected to the LAN-router port (not to the WAN).
• 🔄 Reboot the router (turn off power for 30 seconds and turn on again).
• 🖥️ Check your network settings on your computer: Open the Control Panel → Network control centre → Change the adapter settings. Right-click on Ethernet (or Wi-Fi) and select Properties. IP version 4 (TCP/IPv4) and make sure that you are selected to receive IP-address.

1. Open the command line (Win + R → enter cmd).
2. Follow the command: ipconfig /all
3. Find the main gateway line - that's it. IP-router.

2.The login page opens but does not accept the password

Possible solutions:

• 🔐 Make sure the Caps Lock key is disabled (password is case sensitive).
• 📱 If the password has been changed through the Mi WiFi app, try resetting it there in the router management section. → Admin password.
• 🔄 Reset the router (as described above) if the password is lost.

💡

If you often forget passwords, create a text file with login data and save it to a secure cloud storage (like Google Drive or Mi Cloud) with two-factor authentication.

Alternative ways to enter settings

If the standard method does not work, alternatives can be used:

1. via the domain name miwifi.com or router.xiaomi.com

Instead IP-Enter addresses in the browser:

• miwifi.com (for most models)
• router.xiaomi.com (for AX6000 and new firmware)
• Frequent Errors and Their Solutions Let’s analyze the typical mistakes that users encounter when trying to log in to Xiaomi settings: Error Possible reason Solution Page does not open (ERR_CONNECTION_TIMED_OUT) Incorrect. IP-Address or router not responding Check cable connection, reboot router, use miwifi.com Error 404 Not Found Web interface disabled or incorrect address Enable web access in the Mi WiFi app or use the correct IP Incorrect login / password Password changed or reset did not work Hold Reset 15+ Seconds to completely reset Authorization page does not load completely Browser Incompatibility or Script Block Use Chrome or Firefox, disable AdBlock After login, a blank page appears Firmware or browser cache Clear browser cache or try another browser If None of the methods helped, perhaps the router. Set up a firewall: Into Security → Firewall, turn on the protection against attacks from the Internet: 🔄 Regularly (every 3-6 months) update the router firmware. 📡 Disable function WPS (It's vulnerable to hacking). 🔐 Use it. WPA3 instead WPA2 Wi-Fi encryption (available on new models). 💡Using a standard admin password makes your router vulnerable to attacks from the Internet. According to research, more than 60 percent of home network hacks are due to weak passwords or vulnerabilities in the web interface. Complete reset (hold Reset for 20 to 30 seconds) try connecting from another device (laptop, smartphone) and if the router doesn't respond, check for physical damage (overheating, damaged ports). FAQ: Answers to popular questions Can I go to the settings of the Xiaomi router without a password? Not if the password has been changed from the factory password. The only way to get around authorization is to reset the router to the factory settings (Reset button (admin/admin). Why does the router not open the page after resetting? 192.168.31.1? Possible causes: IP-The router's address may have changed after reset 192.168.0.1 (Especially for Chinese versions. The network on the computer is configured with static IP, which conflicts with the router. Switch to automatic receiving IP (DHCP). The browser caches the old page. Try opening the address in incognito or another browser. IP-router address if 192.168.31.1 There are several ways: In the command line (Win) + R → cmd) perform: arp -a Look. IP s MAC-The manufacturer's address (usually starts with the 78:11:DC or 00:9E:CF). To the control panel. → Network control centre → Connections find the default Gateway. In the Mi WiFi app IP-The address is listed in the router information: Can you control the Xiaomi router via your phone and computer at the same time? Yes, but with the caveat: The web interface and the Mi WiFi application can work in parallel, but changes made in one do not always immediately appear in the other (reboot router is required). If you change the admin password through the web interface, it will automatically update in the application (and vice versa), some features (such as parental controls) are more convenient to configure through the application, and advanced options (ports rollover) are more convenient to configure through the application, VPN) — What if, after updating the firmware, the web interface became English? In new firmware, the interface language is tied to the router region. To return Russian: Go to settings in 192.168.31.1. Go to Settings → System → Language. Select Russian (if it is not on the list, the router is designed for another region, and you will need Russification through third-party firmware).