How to turn on WPS on the router Xiaomi AX3600: safe and in 2 minutes

Why you need WPS on the Xiaomi AX3600 and when to use it

Wi-Fi Protected Setup Feature (WPS) on a Xiaomi router AX3600 It allows you to connect devices to the network without entering a password — just press a button on the case or activate an option in the web interface. This is convenient for gadgets without an on-screen keyboard (printers, smart speakers, IP-There's a critical vulnerability in the technology, however, when you need to share access quickly with guests: WPS uses an 8-digit PIN-code that can be picked up with brute force in a few hours, so it is only necessary to turn it on while connecting new devices.

On the Xiaomi AX3600, the WPS is disabled by default — the manufacturer follows modern security standards. But if you need to connect a device that supports only this protocol (for example, an old HP LaserJet printer or a smart socket TP-Link HS100), activation will take no more than 2 minutes.

In this article you will find:

• 🔍 Step-by-step instruction for inclusion WPS via web interface and button on the body
• ⚠️ Risk Warnings and How to Minimize Them
• 📱 Alternative ways to connect devices without WPS
• ❓ Answers to frequent questions (such as why) WPS It does not work after the firmware update)

Method 1: Enabling WPS via router web interface

The most reliable method is to activate the function through the control panel.

1. Connect to the network of the Xiaomi AX3600 router via Wi-Fi or cable.
2. Open your browser and type in 192.168.31.1 (or miwifi.com – both addresses work).
3. Log in using the admin login and password specified on the router sticker (by default, this is a combination of 8 characters).

After entering the interface:

1. Go to Settings → Wi-Fi → Additional settings.
2. Find the WPS block and move the slider to the position Vl.
3. Press Add Device – the router activates the connection mode for 2 minutes.

At this point, bring the device that you need to connect to the router (up to a distance of 1 meter) and activate the function on it. WPS. For example, on printers it can be a button with a pictogram. 🔄 or WPS.

Make sure the router is connected to the internet.

Check that the device supports WPS

Disable VPN on your computer/phone (can block access to 192.168.31.1)

Write down your Wi-Fi password in case of a crash

-->

⚠️ Note: If after activation WPS The router stopped giving away the Internet, restart it with the Reset button (hold 5 seconds). AX3600 version 1.2.43.

Method 2: Activation of WPS button on router body

The Xiaomi AX3600 has a physical WPS button located on the back next to the power port, which is combined with the reset function, so it is important to press it correctly:

• 🔘 Short press (1 second): activates WPS 2 minutes. The Wi-Fi indicator will start flashing blue.
• 🔄 Long pressing (5)+ Seconds: reset the router to factory settings! Use only as a last resort.

Connection algorithm:

1. Make sure that the device (such as Xiaomi Mi Smart Clock) is near the router.
2. Press the WPS button on the AX3600 once, the indicator blinks.
3. Activate WPS on the connected device within 2 minutes.
4. Wait for the message about the successful connection (on some devices it is an audible signal or a flashing light bulb).

If the indicator on the router flashes red, an error has occurred: Retry it or check if your device supports WPS 2.0 (older versions may not work with the AX3600).

Risks of using WPS and how to avoid them

Despite its convenience, WPS technology has serious vulnerabilities:

Xiaomi. AX3600 brute force protection: after 3 failed attempts to enter PIN-The code is locked for 5 minutes, but this does not guarantee 100% security:

• 🔒 Use it. WPS Only to connect trusted devices.
• 🕒 Turn on the function for the minimum time (do not leave active overnight).
• 📡 After connecting the device, check the list of customers in the Settings section. → Status. → Connected devices – are there any unknown gadgets.

💡

If your device supports Wi-Fi Direct or QR-Connection code (like the Xiaomi Mi Band 6) instead of using these methods WPS — They're safer.

What to do if WPS does not work on Xiaomi AX3600

If the device does not connect after activation of WPS, check the following points:

1. Standard Compatibility: Make sure the connected device supports WPS 2.0 (for example, Canon PIXMA printers older than 2018 can only work with WPS 1.0 that is disabled on the AX3600).
2. Firmware Update: On versions below 1.1.30 there are bugs with WPS. Update the software in the Settings → General → Firmware Update.
3. Channel conflict: If the router is running on channel 165 (5 GHz), some devices can't see the network. Switch to channel 36-48 in Wi-Fi settings.

If the problem persists, try alternative ways to connect:

• 📱 Through the Mi Wi-Fi app: Download it to your smartphone, select the network AX3600 Use the "Share Wi-Fi" function (Generation) QR-code).

⚠️ Note: On some of the firmware Xiaomi AX3600 (e.g. 1.2.18) after inclusion WPS automatically shuts down the protection WPA3, slippery WPA2-PSK. Check this in the security settings and return if necessary. WPA3 manually!

How to disable WPS after use

To minimize the risks, always deactivate WPS immediately after connecting devices.

• 🖥️ Through the web interface: Go to Settings → Wi-Fi → Additional settings and move the slider WPS off..
• ⚙️ Automatically: AX3600 WPS It turns off on its own after 2 minutes of activation (if there were no connections.

Check the status of the function:

1. In the web interface next to the WPS slider should burn the inscription "Disconnected".
2. The Wi-Fi indicator on the router should burn blue (do not blink).

If you forget to disable WPS and notice suspicious activity on the network (for example, unknown devices in the customer list), immediately:

1. Turn off the WPS.
2. Change your Wi-Fi password in Settings → Wi-Fi → Security settings.
3. Check the list of connected devices and block unfamiliar ones.

💡

Even if you don’t use WPS, update the Xiaomi AX3600 firmware regularly – new versions will close vulnerabilities associated with this feature.

FAQ: Frequent questions about WPS Xiaomi AX3600