Logging into the control panel of the Xiaomi router is the first step to set up the Internet, change the Wi-Fi password or update the firmware. However, many users face difficulties: the router does not open the web interface, then forgotten the username / password, then forgotten the username / password, then forgotten IP-In this article, we will discuss all the current ways to log into the settings of Xiaomi modems (including the Mi Router models). 4A/4C/4Q, AX6000, AX3600 and others, and solve typical problems.
Xiaomi routers use the Mi Wi-Fi app for management, but the web interface is also available, and we'll show you how to go through the browser to your PC or phone, what to do if the page does not open, and how to reset to the factory settings. IP-Addresses use different models and how to avoid errors in authorization.
1. Standard data for entering the Xiaomi modem
Before you try to go into the settings, check the basic access options. All Xiaomi routers have the same access options, unless manually changed:
- 🌐 IP-address: 192.168.31.1 (main) or miwifi.com (alternative domain)
- 👤 Login: Admin (default)
- 🔑 Password: Indicated on a sticker under the router (usually 8 characters, such as 12345678) or matched with a Wi-Fi password
If you have previously changed this data and forgotten it, you will have to reset your settings, and note that some models (such as the Xiaomi AX6000) may use a different IP, 192.168.1.1, if the bridge mode is enabled.
💡
If the password sticker is erased, try the standard combinations: admin + admin or an empty password field (for old firmware).
Important: once you change your password in the web interface, it doesn't sync with your Wi-Fi password. These are two different parameters!
2. Step-by-step instruction: login via browser
The most versatile way is to use a web interface. Suitable for all Xiaomi models, including the Mi Router. 3G/4G new AX-series:
- Connect your device (PC, laptop, phone) to the router via Ethernet cable or via Wi-Fi.
- Open any browser (Chrome, Firefox, Edge) and type in the address bar: http://192.168.31.1 or alternative address: http://miwifi.com
- Wait for the login page to load. If a warning appears about an unsafe connection (due to a self-signed certificate), click More → Go to the site.
- Enter your login (admin) and password (from the sticker or your current one).
Connecting to the router actively (indicator) Wi-Fi/LAN burn)
Browser Updated to the latest version
VPN/proxy disabled (can block access)
Alternative IP (192.168.1.1) was tried.
-->
If the page does not open, check:
- ⚡ Router power: the indicator should burn stably (do not blink).
- 🔌 Cable: When wired, use the port LAN (not WAN).
- 📶 Wi-Fi: If connected by air, make sure the network name matches the name on the sticker.
3. Sign in via Mi Wi-Fi (Mi Home) app
The Mi Wi-Fi app (formerly Mi Router) offers a simplified interface, but it doesn’t work with all models, such as the Xiaomi AX6000 is supported, while the Mi Router 4A (global version) is not.
Instructions for the telephone:
- Download Mi Wi-Fi from Google Play or App Store.
- Connect your phone to the Xiaomi router network.
- Launch the app and select your router from the list.
- Enter the administrator password (from the sticker or your current one).
Advantages of the annex:
- 📱 User-friendly mobile interface.
- 🔄 Quick access to basic settings (guest Wi-Fi, parental controls).
- 📊 Monitoring traffic in real time.
Disadvantages:
- ❌ Not all models are supported (especially global versions).
- ❌ Limited settings compared to the web interface.
Through a browser on a PC
Browser on your phone.
Through the Mi Wi-Fi app
In other ways.-->
4. Problem Solving: The page does not open
If the browser gives an error when entering 192.168.31.1 (“Site is not available”, “Cannot access”), check the following points:
| Problem. | Reason. | Decision |
|---|---|---|
| Page's not loading. | Wrong. IP-address | Try miwifi.com or 192.168.1.1 |
| Error "Connection not secure" | Self-signed certificate | Press "More" → Go to the website" |
| Browser hangs on the boot | IP or DNS conflict | Clear the DNS cache: ipconfig /flushdns (Windows) |
| Redirect to another page | Provider blocks access | Use a VPN or other browser |
If nothing helps, reset your settings:
- Find the Reset button on the back of the router (usually in the recess).
- Take a paperclip or toothpick, press and hold the button for 10-15 seconds until the indicators start flashing.
- After the reboot, try logging in with factory data.
What if the reset didn't help?
5. Features for different Xiaomi models
Not all Xiaomi routers are the same. Here are the key differences:
- 📡 Mi Router 4A/4C/4Q: use 192.168.31.1, Supports Mi Wi-Fi application.
- 🚀 AX6000/AX3600: may work 192.168.1.1 In bridge mode, have extended QoS settings.
- 🌍 Global versions (Mi Router) 4A Gigabit: often require manual indication DNS (8.8.8.8) for access.
- 📶 4G-routers (Mi Router) 4G): have a separate menu for management SIM-map (Settings) → Mobile network).
For models with Padavan firmware (alternative firmware), the entry path may differ:
- IP-address: 192.168.123.1
- Login/password: admin/admin (unless changed).
💡
Xiaomi routers with Padavan firmware have advanced settings, but lose support for proprietary features (for example, Mi Mesh).
6.Security: How to Protect Modem Settings
After successfully logging into the control panel, be sure to change the standard login data:
- Go to Settings → System → Administrator password.
- Create a complex password (at least 12 characters, with numbers and special signs).
- Save it in the password manager (like Bitwarden or KeePass).
Additional security measures:
- 🔒 Disable Remote Access (Settings) → Remote control).
- 🛡️ Enable the firewall (Settings) → Security → firewall).
- 🔄 Regularly update the firmware (Settings) → System system → Update of the PO).
💡
If the router is connected to Mi Account, its settings can be restored even after resetting through the Mi Home application.
7. Alternative management practices
If the web interface and application are not working, try:
- 🖥️ Telnet/SSH: for advanced users. Included in Settings → Additionally. → Remote control, then command connection: ssh admin@192.168.31.1
- 📡 Tftp firmware: if the router is "bricked" (not turned on) requires special software (for example, Tftpd64) and firmware from Xiaomi's website.
- 🔧 Service menu: for some models available 192.168.31.1/cgi-bin/luci (Only for experienced users!).
⚠️ Attention: Use Telnet/SSH or TFTP This can cause the router to break if the instructions are not executed correctly. These methods are recommended only for recovery after a failure.