How to go to the personal account of the Xiaomi router: all ways to log in and solve errors

Logging into the personal account of the Xiaomi router is the first step to set up a home network, change the Wi-Fi password or update the firmware. However, many users face difficulties: the page does not open, the logins do not fit, the router does not respond to attempts to connect. In this article, we will discuss all the current ways to log into the web interface of Xiaomi routers (including Mi Router models). 4A, AX3600, AX6000 and others), and also solve typical problems - from password reset to conflicts IP-address.

It is important to understand that the login process may vary depending on the firmware version and device model, such as new Xiaomi routers with MiWiFi firmware. ROM Requires a link to a Mi Account, whereas older models (Mi Router) 3) We're going to look at both of these, and we're going to look at alternative methods of accessing through a mobile app and a mobile app. Telnet/SSH for advanced users.

If you've never gone to your router's settings before, don't worry: it's designed for beginners, and it's for people who have tried it before, but have encountered errors like this. ERR_CONNECTION_REFUSED or endless page loading, we have prepared a section with troubleshooting and troubleshooting.

1.Preparation for the entrance: what you need to know before the beginning

Before you try to enter your personal account, make sure that the basic conditions are met:

• 🔌 Xiaomi router is connected to the power supply network and is turned on (power indicator is on or flashing).
• 📶 Your device (PC, smartphone, tablet) is connected to the router network via Wi-Fi or Ethernet cable.
• 🌐 Browser's offline. VPN, Proxies and extensions to block ads (they may interfere with the loading of the control panel).
• 🔒 You have login data: standard login / password (if not changed) or Mi Account data (for new models).

If you're connected to a router over Wi-Fi, but the login page doesn't open, try using a cable. Sometimes access issues are related to wireless network settings. Also check what your device is receiving. IP-address from the router automatically (in the properties of the connection should be the parameter Get IP-address).

Important! If you bought a used router or you don't remember your password, you may need to reset your settings to the factory settings, which will delete all current network settings, including the Wi-Fi name and password.

2. Standard method of entering through the browser

The most common method is to access the web interface.

1. Open any browser (Chrome, Firefox, Edge) on a device connected to the router.
2. In the address bar, enter one of IP-192.168.31.1 is the main address for most Xiaomi models. 192.168.0.1 is an alternate address (less commonly used). miwifi.com is a domain name (works if the router is configured correctly).

Enter

If the page does not load, check:

• 🔗 Correctness of the entered address (frequent error - typos in 192.168.31.1).
• 🔄 Update the page (F5 or the update button in the browser).
• 🛡️ Turn off the firewall or antivirus (they can block access).

On the authorization page, enter:

• For older models (Mi Router 3, Mini): admin login, admin password (if not changed).
• For new models (AX3600, AX6000): login and password from your Mi Account account.

3. Sign in via the Mi WiFi mobile application

For users of Xiaomi smartphones or other Android devices, it is more convenient to use the official Mi WiFi app (formerly Mi Router), which allows you to control the router without entering. IP-addresses and supports all modern models.

Instructions:

1. Download the Mi WiFi app from Google Play or the App Store.
2. Connect your smartphone to the network of the Xiaomi router.
3. Open the app and log in to your Mi Account (if the router is linked to it).
4. The app will automatically find your router on the local network. Click on it to open the control panel.

Advantages of the annex:

• 📱 A user-friendly interface adapted for mobile devices.
• 🔔 Notifications of new connected devices or firmware updates.
• 🔄 Remote control capability (if enabled in settings).

Limitation: Some advanced settings (such as Port Forwarding or VLAN) may not be available on the mobile version.

4. Solving Entry Problems: Errors and Resolving Them

If you can’t log in to your account, use the table of typical errors and their solutions:

Critical information: If the Xiaomi AX6000 or AX3600 router requires a link to the Mi Account, but you do not remember the account details, resetting will not help - the device will remain locked.

💡

If the router does not respond to ping (check with ping 192.168.31.1 in the command line), try to turn it off power for 30 seconds, then turn it on again.

5. Reset password and router settings

If you forget your password or your router is locked, perform a hardware reset to factory settings.Warning: this will remove all settings, including the Wi-Fi name, password and binding to Mi Account (for older models).

Instructions:

1. Find the Reset button on the back of the router (usually recessed in the case).
2. Take a paperclip or toothpick, press and hold the button for 10-15 seconds until the indicators start flashing.
3. Release the button and wait for the reboot (1-2 minutes).
4. Connect to the router network (the network name will be standard, for example). Xiaomi_XXXX), password on the bottom sticker.
5. Enter your personal account at the address 192.168.31.1 login-password admin/admin.

Exception: For the AX3600 and AX6000, the reset will not remove the Mi Account binding. After the reset, you will need to log in through an account to which the router was previously associated.

💡

Resetting is a last resort, before you try to restore your password through Mi Account or contact Xiaomi support if the router is linked to your account.

6. Alternative access methods (for advanced users)

If the web interface and application do not work, you can try other methods:

6.1. Access through Telnet/SSH

Some Xiaomi models (such as Mi Router 3G) support access over Telnet or SSH.

1. Install PuTTY (Windows) or use a terminal (Linux/macOS).
2. Connect to 192.168.31.1 at port 22 (SSH) or 23 (Telnet).
3. Enter the root login and password (by default it can be empty or coincide with the password from the web interface).

Warning: Incorrect commands in SSH can disrupt your router, and use this method only if you are confident in your actions.

TTL connection (to unlock)

If the router is blocked after firmware or reset, you can use the TTL-(only for experienced users) will be required:

• 🔧 Screwdriver for disassembling the body.
• 🖥️ USB-TTL adapter (e.g, CP2102).
• 💻 Tera Term or Screen (Linux).

For detailed instructions on unlocking via TTL, look for profile forums (e.g. 4PDA), as the process depends on the router model.

💡

Before using alternative methods, back up your router settings via the web interface (Settings → Backup).

7.Security: How to protect a router’s personal account

After successfully logging into the router settings, Xiaomi is recommended to take security measures:

• 🔐 Change the standard password to a complex one (at least 8 characters, with numbers and special characters).
• 🛡️ Disable Remote Access (if not used): Settings → Remote control.
• 🔄 Update the firmware to the latest version (Update section).
• 👤 Link the router to Mi Account (for new models) – this will protect against resetting by attackers.

Also check the list of connected devices (Settings → Devices) and block unknown devices. If there are other devices on the network, change the Wi-Fi password.

💡

Regularly update the router firmware – this closes vulnerabilities and improves the stability of the network.

Frequently Asked Questions (FAQ)